similar to: Linux limits

Hi everyone, I am running into wall today with simultaneous call limits. I have two Asterisk machines (fast 3GHz C2D with 2GB of ram). I tried to create a lot of sip calls from one machine to the other by issuing AMI Originate commands to one machine. The machine that makes calls plays a message (demo-intruct) upon the other machine answer. The machine receives the calls just waits for 40 seconds

Hi all, Just ran into some issue with the originate AMI command. It seems that there is a limit of around 120 calls I can place with the originate command simutanously. By that I mean sending Asterisk a lot of originate command very fast. Anyone know if there is a limitation? Thnx. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello good ppl, Any way of stopping asterisk writing into syslogs or any other file, if I set verbose 6 on the console? All I want is the verbose output only on the console, nowhere else. My logger.conf says : console=> notice,error ;messages => notice,warning,error Thanks in advance. - Benjamin Jacob. EMAIL DISCLAIMER : This email and any files transmitted with it are confidential

Hello ppl, Am looking at some PSTN termination providers in US. If this question has been repeated, please point me to the correct link, as I've tried searching the archives but have been unsuccesful so far. I have come across quite a few companies which provide the same, such as : Iconnecthere <http://www.iconnecthere.com> Vonage <http://www.vonage.com> Teliax

Hello All, Is CALLERID() setting broken in 1.4.4? My small dialplan : [testclid] exten => _0.,1,Set(CALLERID(all)=Ben Jacob <988077>) exten => _0.,n,Dial(SIP/${EXTEN}) Correct me if I am wrong, Set(CALLERID(all) above supposed to change the display name as above(Ben Jacob) and change the From URI to 988077 at myip?? As of now, only the _display name_ is being replaced, but not the

Hello All, I am using ODBC storage for voicemail on my asterisk box. I want to have a common voicemail box for different extensions. I know how to do that, but the question troubling me is how and where do I store the the extension name for which a particular voicemail was left. e.g. extensions 1000, 1001, 1002 all using the same voicemailbox 55555. Now, when someone calls 1000, and leaves a

Hello good ppl, A couple of questions for multiple pbxes 1. Is it possible to support multiple pbxes in one Asterisk box(using contexts, etc.)? 2. Can we use the "domain" field in sip.conf to specify the different domains for sip users, having one domain for each pbx? I just tried registering two xlites, with different domain names (with the same specified in sip.conf). But, Asterisk

Hello ppl, Have implemented a really nice Billing engine using AGI scripts. So far it works fine, tho haven't yet put it in the torture cell. The AGI scripts have been written in PHP, using MySQL for the billing and profile information. The major disadvantages I see using AGI scripts : 1. A new process(invocation of PHP scripts) on every new call. 2. MySQL connections on every instance of

Is there a way to backup files to a remote machine on which I don't have root permission, while preserving their uids/gids? I know that only the super-user can set the owner and group of a file, so what I am actually looking for is a tool that would store the actual uids/gids of all files that are backuped by rsync in a kind of meta-file. This file could then be used to restore the files

Hi, I am using asterisk 1.6.0.10 For debugging i set verbosity to 10 with asterisk -vvvvvvvvvvr.. now i am trying to set it lower but.. when i type asterisk -r it starts with Connected to Asterisk 1.6.0.10 currently running on asterisk1 (pid = 2408) Verbosity is at least 10 when i try set verobisty 1 or similar commands.. i think this command is obselete in 1.6 .. set verbose 1 No such command

Hi, I'm working on a 500 seats Asterisk project. I'm wondering whether or not I should consider using Asterisk Realtime and a database to manage phones registrations. Stories in Dev mailing list say Realtime is mis-used or should be improved. So, what's the bottom line ? Can I consider anything I can do with .conf files can be done with a combination of .conf files and Realtime.

Anyone tried the digium TC400B transcoding card? What are your opinions? Thnx

"Geoffrey L. Hausheer" wrote: > > So not to beat a dead horse or anything, but after seeing Gavriel's note > that InstallShield was working in the latest Transgaming patch (I have no > need of the Direct3d stuff, but I was not able to find any relevant pattches > by Andreas on PATCHES), I installed the patch, and tried out installing > MediaPlayer yet again, and

Hi all, I need the zap channels going, but got the following error. What do I need to change in my configuration? Thnx. chan_zap.c: In function `zap_send_keypad_facility_exec': chan_zap.c:2309: warning: implicit declaration of function `pri_keypad_facility' chan_zap.c: In function `pri_dchannel': chan_zap.c:9292: structure has no member named `call' make[1]: *** [chan_zap.o]

I am running Irix 6.5.12 and samba version 2.2.1 and am getting the following error message when trying to log onto a windows machine that has a samba mount mapped. System error 71 has occurred. No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. Any help would be appreciated as I am a newbie where samba

Hi, Can anyone help me with this: I have downloaded latest stable version of Asterisk using the asterisk-update.sh script. Compilation and installation passed well. When I start Asterisk I get the following error: [pbx_realtime.so]Jan 28 09:35:08 WARNING[3253]: loader.c:258 ast_load_resource: /usr/lib/asterisk/modules/pbx_realtime.so: undefined symbol: ast_load_realtime_multientry Jan 28

Hi - I just got an A200 card with 1 FXO and 1 FXS module. Sadly, I can't make it work- currently, asterisk will not startup because of a bad module. Below are some log files/config files. If anyone has any suggestions, I'd appreciate it. I used Trixbox 2.0 and followed instructions on (http:// sangoma.editme.com/wanpipe-linux-asterisk-atHome) - no problems running through or

I installed TDM400P and X100P pci cards in a system running mandrake 10.1 official, kernel 2.6.8.1-12mdksmp. I can compile zaptel, libpri, asterisk and modprobe (zaptel, wcfxs, wcfxo) without errors. Except that running ztcfg and asterisk fails. [root@asterisk asterisk]# ztcfg Notice: Configuration file is /etc/zaptel.conf line 3: Unable to open master device '/dev/zap/ctl'

Hi all, I am handed a project to setup *. The requirement is that it can handle 8 T1s. Half of the calls coming into the system will be routed to SIP extensions (with transcoding). The machine we have in our disposal is a new dual Xeon 3.2gHz server with 2g of ram and an dual 1000mb nic. Voice will be coming in from the PSTN (through 2 quad digium cards) in g711ulaw, and most of the time will

Hi all, Is there a way to connect two live calls through the manager api without directing them to a meeting room? Currently, I can connect them by sending them to a meeting room. However, I don't know what the overhead is, and I kind of think that if I can connect them or link them up, the overhead would be minimum. -------------- next part -------------- An HTML attachment was scrubbed...