similar to: Direct dialing to correct extension from analog lines

Hello, I'm in the process of building an Asterisk machine and need 5 or 6 BRI-Channels. I was looking for the beroNet and Junghans cards and stumbled upon the Xorcom Astribank xBRI products. Has anybody tried out the Astribank xBRI-Channel Banks? Are they production ready or should I go with a beroNet BN8S0 or JUNGHANNS.NET octoBRI ISDN? Thanks in advance, Lars -- We don't like their

I have a strange problem with overlap dialing. I installed an asterisk server between a Siemens HiCom PBX and our telephony provider. Everything is working fine except some strange problems with the dialing of the fax (connected to the HiCom PBX). It seems to me that if dialing takes too long Asterisk just hangs up the channel without recognizing that the fax machine is still dialing: (Fax gets

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Hi, I am looking to connect 66 analog phones to an asterisk box. I was thinking of a Xorcom astribank 32port (2 of them and another 8 port). this is because the phones have no near connection to an ip network, so replacing the phones in favor of voip phones+network cabling is kinda out of the question. In your experience, will these units support all the phones talking at the same time with

Hi, I'm having some trouble setting up a Xorcom Bri 4 port. I have compiled asterisk and zaptel using the Bristuff bristuff-0.3.0-PRE-1y-g patches. So I'm running zaptel-1.2.17.1 and asterisk-1.2.18. The problem I'm having is that for one I get no LEDs showing if the unit is in TE and NT mode (not a issue for me but may have some impact on things) I have no errors in any logs I

Hello, I am trying to update to dahdi 2.2.1. But somehow the xorcom (2BRI) device does not want to work. I pasted below the information I have. pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader reset pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader usb 'xpp_fxloader'[4937]: --------- FIRMWARE LOADING: (usb) [1 devices] ..Got all 1 devices 'xpp_fxloader'[5003]: ---------

I'm having trouble getting a xorcom set up. A large part of the problem is that the box is a _long_ way away and I can't get to/at it easily, so while I could probably fix this in a few hours if the machine were in front of me, I'm struggling over a slow unreliable laggy link. Ok, enough whining from me. I have a new Xorcom plugged into the usb of a Suse 11 machine I built Dahdi

Hi, I am having periodic sound clicks (2-3 per second) on all FXS of a TDM400P when the remote end is my VoIP provider. However: - recording the conversation on the asterisk, does not have the glitches, although I can hear them on a real phone. - My VoIP provider to my VoIP phones through the same asterisk is OK. - TDM to TDM through the same asterisk is OK. I tried with and without

Hi, I have upgraded an Asterisk installation with a Xorcom BRI Astribank that was working under Ubuntu 8.04 to Ubuntu 9.10 and the device is no longer initialized. When I reload the udev rules, I see that the rules seems to be correctly loaded: udevd[452]: reading '/etc/udev/rules.d/40-xpp.rules' as rules file However, these rules do not seem to be triggered: # udevadm trigger

Hello, I've one astribank with 8 FXO unit and 8 pstn lines connected to the astribank. When I receive calls on my ipphone I get always Unknown callerid. It's is possible to receive the callerid from the lines on the astribank unit? This is my config: [channels] language=es context=from-zaptel signalling=fxs_ks ;rxwink=300 usecallerid=yes callerid=asreceived ;cidsignalling=bell

, address 2 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.344611] ERR-xpp_usb: XBUS-00: x= usb_listen: usb_submit_urb failed: -19 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353325] INFO-xpp: XBUS-00: [] D= isconnecting Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353373] Zaptel: Master changed = to XBUS-00/XPD-01 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353382] Zaptel: Master changed = to

Hi all... I'm sorry for repeating my message. I have a problem with caller id on my asterisk server with xorcom astribank. here is my configuration : centos-5, asterisk 1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2 ibm X-3200 series, xorcom astribank (16fxo, 8fxs), 16 line telco (hunting) everything fine until I try to feed my app with caller id. here is the log : --

Hello, after having no problem with four Windows 2000 workstations and one Samba 2.something server for several years in a medical practice the practice software (DocComfort) dropped support for Windows 2000 beginning of this year. So I bought new hardware for the workstations and servers and installed from scratch. Now there are four Windows 7 Professional 32bit Workstations (with UAC disabled)

Hello List, it is a very long time since I wrote here.... It has been still in Zaptel times.... Today I am run into a related problem: I can't get a DAHDI setup to work 100%. I am configuring an Astribank XR00013 (BRI, two ISDN ports). At some degree the installation (latest DAHDI drivers, Asterisk 1.6.0.18 on Centos 5.x) works. I can get incoming calls to the dialplan context that is

Hello Mailinglist, we have a Xorcom Astribank which is installed at our client and working since 10/2008. Suddenly last week there where odd behaviors, no calls going through (it is used to route calls to GSM Gateways). Upon testing (reinitialization of the complete gear) it turned out that one call get's through and then nothing more. I have nothing in the logs, indicating that Asterisk

Kapejod is working on a fix for the CDR problem in bristuff. See below ----- Forwarded message from kpj@junghanns.net ----- Resent-From: tzafrir.cohen@xorcom.com Resent-Date: Fri, 10 Feb 2006 13:01:25 +0200 Resent-Message-ID: <20060210110125.GU16880@xorcom.com> Resent-To: tzafrir@cohens.org.il Envelope-to: tzafrir.cohen@xorcom.com Delivery-date: Fri, 10 Feb 2006 05:19:50 -0500 Date: Fri,

Hi I have a problem with dtmf recognition an analog lines connected to Sangoma A200. The digits (in most cases the first one) are doubled and so my IVR is useless. I tried to adjust the rxgain, toneduration and relxing the dtmf but nothing worked. I also noticed one thing it only happens during the background application: exten => s,1,Background(soundfile) exten => 111,1,Dial(SIP/111)

I have a server with 8 Xorcom Astribank, they're connected to the server via a USB hub, my problem is: when a reboot the server the ID of the Channel Bank changes, cousing a big mess on my server. Anybody know how can I solve this ? Best regards, -- Guilherme Loch G?es Visite nossa loja virtual: http://www.shopvoip.com.br Not?cias e F?rum sobre VoIP com software livre:

Hello, I recently got a problem I have never seen during my previous installations. I have a Xorcom device with 4 BRI and 8 FXS ports. I use ubuntu Linux and asterisk 1.4.22. Everything works fine but after some time zap channels disappear in asterisk. root at pbx1:~# cat /proc/zaptel/* Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" AMI/CCS NOTOPEN 1 XPP_BRI_TE/00/00/0 Clear

Hello, I have a problem with MoH at attended transfers. - Mobile A dials into Asterisk - Asterisk dials another Mobile B - Mobile B presses *1 for attended transfer and for example 20 to dial extension 20 - Asterisk sends "Remote hold" message to Mobile A, so the carrier of Mobile A starts playing it's own music-on-hold - Mobile B hang up, so Mobile A should be connected to