similar to: Wine doesn't start with wireless network

Hello! I'm trying to make a wireless mesh network with b.a.t.m.a.n. protocol, and I would like to secure the wireless links with tinc. My test network is 2 wireless routers with OpenWRT Kamikaze firmware, and the network topology is the following: |CLIENT|eth0: 192.168.180| <--> |eth0: 192.168.1.1|MESH-NODE|ath0: 192.168.5.54| <~~> |ath0: 192.168.5.51|GW|eth1: 192.168.1.51|

I''m trying to follow Chapter 10 of the howto and apply it to two ubuntu machines each with two 802.11b/g interfaces. However, I cannot get a connection. I would like the 4 interfaces to create 2 ad hoc links on separate channels. I have set this up successfully with the following: /etc/dbus-1/event.d/25NetworkManager stop wlanconfig ath0 destroy wlanconfig ath0 create wlandev wifi0

I have been playing around with 3 ath based FreeBSD boxes and seem to have got everything going via WPA and a common PSK for 802.11x auth. However, I want to have a bit more certainty about things working properly. What tools do people recommend for sniffing and checking a wireless network ? In terms of IDS, is there any way to see if people are trying to bruteforce the network ? I see

I am using the madwifi driver with the patch to allow changing of the MAC address and I have two other ethernet interfaces plus a pppoe interface. My outbound connection is ppp0. I have ath0, eth1, eth2 for internal interfaces. I have added these three interfaces to br0. Once the traffic leaves the linux router, it gets NAT'd and goes out through ppp0. All traffic on all segments works

I have built my own wireless AP with Ubuntu 7.10 and an Atheros-based wireless card. My problem is that I can't access any of the Samba shares with my wireless clients...they can all search for the server, get prompted for a login then it just hangs and eventually times out. The same clients, when using their LAN ports to connect to the same server, are able to do everything--browse and

Hi, after some time without FreeBSD I installed 7.1 on an IBM Thinkpad T30 (with ZFS root on encrypted geli, works great). Config is: FreeBSD hasking.alashan.nongo 7.1-STABLE FreeBSD 7.1-STABLE #3: Thu Feb 5 21:10:45 CET 2009 root@hasking.alashan.nongo:/usr/obj/usr/src/sys/HASKING i386 I tried using my ath based D-Link DWL G650, which still seems to have some issues in regard to interrupt

Hi. I have problem in following scenario: 3 routers A, B, C: router A: eth0--> DSL ( public IP ) eth1 --> 192.168.0.1 ( local network ) routing table A: 83.x.x.x/29 dev eth0 proto kernel scope link src 83.x.x.x 192.168.5.0/24 via 192.168.0.8 dev eth1 192.168.4.0/24 via 192.168.0.8 dev eth1 192.168.3.0/24 via 192.168.0.8 dev eth1 192.168.2.0/24 via 192.168.0.8 dev eth1 192.168.1.0/24

How can I use a wireless device instead of the standard eth0 device with XEN. My existing wireless device has the Atheros/Madwifi support and works with the Ubuntu Linux distribution (Breezy Badger) without XEN and shows up as device ath0. It does not show up when I boot XEN. _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com

> Message: 8 Date: Tue, 12 Dec 2006 15:22:53 +0100 From: Alexander > Nicolaysen S?rnes <alex@thehandofagony.com> Subject: Re: [Wine] > explorer.exe 100% kernel time? To: wine-users@winehq.org Message-ID: > <200612121522.53927.alex@thehandofagony.com> > > I don't think he meant upgrading Wine, he meant compiling Wine from > source. > > Regards, > >

NetworkManager used to work fine for me but during the last few installations its a big hurdle in the wireless connectivity. I'm using Madwifi and its interface is correctly listed and working but I cannot connect to any wifi AP without NetworkManager. I've two interfaces: eth0 and wifi0. Starting NetworkManager doesn't show any notification icon in the top right in gnome and I believe

Hi Rahul, If you're certain that your problem isn't as Stephen suggested, you might want to have a look at this: --- (From http://ebtables.sourceforge.net/brnf-faq.html <http://ebtables.sourceforge.net/brnf-faq.html> ) How do I let vlan-tagged traffic go through a vlan bridge port and the other traffic through a non-vlan bridge port? Suppose eth0 and eth0.15 are ports of br0.

So, with the updated HAL, I'm now able to negotiate an IP address via DHCP over the WLAN. Huzzah! But I've got two questions (now that I can use the card): ath(4) doesn't contain a list of media nor mediaopt settings that can be used. Some are detailed down in EXAMPLES, but there's no comprehensive list. (As well, and this is minor, the speeds are explicitly listed for 802.11a

Hi, May I ask you for a favour? I'm in the process of applying for a govenment-assistance for small-business startup, and they require me to hand in a survey form before Friday. Would please reply me and in reply, fill the survey form below? I appreciate your help very much! Thank you very much in advacne!, Yi Richard Jiang www.2ptech.com Canada =================Survey Form===============

Hi All, Let me try again, this time with fixed width ! First off the scenario. We have a local and remote site, both of which connect to the internet via a wireless network. The wireless cards themselves have both an ethernet (ixp1) and an "Atheros" (ath0) interface. The devices connect via PPPoE, and so there is also a ppp0 interface on each device. On one side we have : IXP1 IP

Hi, I'm having this weird problem with all computers I have tried, but they all run Gentoo so it may still be a configuration problem. What happens is that all apps run through Wine work fine on my computer, but if I start another computer in the network in Windows, I am not able to start most applications with Wine; or rather, they hang foverer instead of starting. This happens to

Hi Sam, do you know if there is anything done about cbb(4)? I have many wireless adapters with ath(4), but only the one based on PCMCIA is making problems on FreeBSD. I cannot boot my notebook with the device inserted into the port, or it will render the system unusable (100% load on cbb(4)). And all I can see is the following: Jul 12 14:58:39 link kernel: ath0: ath_chan_set: unable to reset

I use the included Notepad a lot. WINE used to save where I had re-sized and placed it, but now it does not. How do I save my re-size? Thank you.

I rebuilt my notebook that has the atheros card in it, and forgot to save all of my setup to get it working. I am using dkms and the madwifi rpms from rpmforge. My modprobe.conf has a line: alias wifi0 ath_pci I can ifconfig wifi0 up But the command: /usr/sbin/wpa_supplicant wpa_supplicant -dd -D madwifi -i wifi0 -c /etc/wpa_supplicant/wpa_supplicant.conf fails. Now some of my old

I am doing some testing of openwrt'd wireless access points, using madwifi-ng'd atheros radios. In the test configuration, I have three devices in a triangle, each has wds links to the other two devices. The ath0 interface is in ap mode, ath1 is a wds link to one device, and ath2 is a wds link to the other device. All three interfaces (and an ethernet interface) are in a bridge (br-lan)

Hello, I bought a LevelOne WPC-0301 11g Wireless CardBus Adapter today. According to the box it is "v6". The ral(4) man- page mentions only v2, but that one is ancient and can't be bought anymore. So, enabling the debug sysctl gives this in dmesg: cardbus0: Expecting link target, got 0x0 cardbus0: <network, ethernet> at device 0.0 (no driver attached) cardbus0: CIS pointer