similar to: Dundi x ENUM

Hi all, I'm planning to deploy many Asterisk servers for remote sites connected through IAX. Behind each server, there will be many sip clients connected. A sip client from one site must be able to make calls for the other sip clients connected to the other remote Asterisk servers. I've heard that DUNDi is a good option in order for each Asterisk server to locate the right (or the

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi list, I'm looking for the best / recommended solution for automatic discovery of phone numbers for a multiple Asterisk system. This would be for an administration, with many branches (~30), but a common infrastructure (DNS, LDAP). Most branches would have Asterisk servers for various reasons (location, administrative). All contacts would be in

Is anyone actually using Enum or Dundi for internet voip routing? Both approaches seem to be rather silent on this list, cvs, etc. Is either (or both) approaches something that should be considered for small businesses? How about small itsp's? Rich

I have two Asterisk servers running on the same LAN. One starts fine, but when I start the other I get: pbx_dundi.c:4582 load_module: Unable to bind to 0.0.0.0 port 4520: Address already in use and Asterisk does not start. OK I thought, I'll just change the port in dundi.conf. I changed it to 4521 and indeed it started just fine, until I reboot that is. WHen I reboot, I get the same

>From the reading and testing I have done it doesn't look like SIP supports a username and password in the Dial string. I currently have the following mapping. priv => dundi-extens,0,SIP, dundi:pass at 1.1.1.1/${NUMBER},nounsolicited,nocomunsolicit,nopartial On the sending side I see NOTICE[31598] chan_sip.c: Conflicting extension values given. Using 'dundi' and not

I have three Asterisk boxes. Each has the following in dundi.conf: 180net => dundi_local,0,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx1,1,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx2,2,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx3,3,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial My iax.conf on all three

Are there DUNDi CLI commands for Asterisk 1.4? I have searched google and I only see the dundi commands in Asterisk 1.6, although I see reference to them in older version's of Asterisk such as Asterisk 1.4 here: http://www.asteriskguru.com/tutorials/cli_cmd_14.html. When I view the CLI commands through help I don't see any of the dundi commands and there are errors when I run a command

Hi, i'm having asterisk with sip working fine, including dundi lookups. The only problem i'm having is that the dundi answer allways contains my internal, private ip. Is there any way to set the targeting ip that is sent out in the dundi answer (to my public ip or any other where i want to receive the call)? Regards, Andreas.

Hi. I am trying to pass a variable from one Asterisk PBX to another. I'm using DUNDi with IAX2. Is there a way to do it? I tried the following but it fails. On peer1: [dundi-outgoing] switch => DUNDI/priv exten => s,1,Set(CDR(userfield)=test) exten => s,2,Set(DUNDIVAR=${ARG1}#TEST) exten => s,3,NoOp(Passing ${DUNDIVAR} to DUNDi peer.) exten => s,4,Goto(${DUNDIVAR},1) On

Ugh. We thought we'd fixed some problems by using regexten and DUNDi. Guess not. We have a configuration with three Asterisk boxes. Phones register with a single, primary asterisk box under normal conditions. For voicemail deposit, retrieval, we trunk the calls over to our asterisk voicemail server. However, the voicemail server now has no knowledge of the location details of the phones,

With all of the recent talk on the list about DUNDi, I have a question. From the outset it appears that SER is often used for high availability solutions and as a tool for almost clustering Asterisk boxes behind it. It appears to me that DUNDi is providing a lot of this as well. Now I know DUNDi is not an application by itself to proxy SIP requests but can I hear any information out there that

hi: i am new to asterisk and dundi. we have some branch office which will use asterisk in the future. they will form a full-mesh structure so every site can contact each other directly. i want to try setup dundi, then we don't need to modify every pbx when a new site add in the cloud. thanks to the great dundi document "caveman can do it" and other resource in the

Does anyone know where I can find some good DUNDi docs? The ones are dundi.org are absolutely horrible. The examples in dundi.conf are pretty much useless. I still can't figure out why Digium can't write some good documentation. It's their 'baby' after all. This really drives me nuts and pisses people off in general. I've been dicking around with DUNDi for over 6 months and

Hi Well it is well some time that my last DUNDI peer has become unreachable. I guess too many issues with spoofed numbers etc. But I am wondering, do people, especially larger entities like telcos, still use DUNDI? I know that in some Hamradio communities, DUNDI is used to interconnect PBXes, but that is with private phone number ranges, not connected to the public. Want some DUNDI peering?

Hi guys, Is it possible to allow remote peers to connect to your local DUNDi Asterisk box, even if you don't have them listed in the dundi.conf? Alex

Hi guys!! This is something that have always bother me, hope you can help me... :) I've 8 server connected using IAX / DUNDi, it works just fine. However, sometimes when some of our links goes down the server takes forever to appear back as OK at DUNDi's list and people can't call the other Box. It's happening right now: CLI> dundi show peers 00:14:22:16:54:c5 200.X.X.6

Hi all, I'm planning to buy a X100P clone and would like some feedback about this card. Does anyone already used this card? Does anyone recommend it ? or not? I'd appreciate any comments. Thanks. Ronaldo.

Hi, I'm having difficulties with using DUNDi between two servers. If it were three I think I could control looping by limiting TTL, but with two I'm not sure how to prevent a loop causing bad things to happen. I've tried ttl=1 but things still blow up. The DUNDi configurations are pretty simple and work just fine in both directions as long as only one of them is using the switch

Is there a way to have a dundi host advertise extensions for another server? A-----------B-----------C I'd like A to reach C through B. A and C would handle the call, B would just be the DUNDi intermediary. Assuming A has 101-199 B has 201-299 And C has 301-399 A sample dundi/extensions/iax config for B is all I need. I can get single DUNDi queries running fine(A->B, B->C,

This is driving me nuts. Why doesn't the DUNDILOOKUP function return the weight of a path to a number? The CLI 'dundi lookup' command does. What about the mac address and expiry period? The CLI command returns those, but the DUNDILOOKUP function does not. Why? We absolutely need this in order to perform out routing logic. It has become quite apparent to me that DUNDi is _NOT_ suited