similar to: Hardware Platform Recommendations for Digium Card Compatability

Another day, another apparant unexplained hardware incompatibility. I have a TE412P and a TDM400B living quite happily in a whitebox using an Intel motherboard: http://www.intel.com/design/servers/boards/se7230nh1-e/index.htm I tried to move to an IBM x3650 system. It uses a slightly newer chipset, but apparantly it's in the same family. The SE-7230 board has been EOL'd and the

Hi I'm having problems getting the TE420 working in HP DL380G5 servers. The cards don't seem to be detected 100% by the BIOS. With two cards in the server they are never detected. things I've tried: 1 Update firmware to latest (P56) for the server 2 change irq settings 3 disable all onboard devices on server and remove raid controller 4 different cards in different slots What I

Hi All: I have an HP DL380G5 server which I am loading CentOS 6.2 on and it does not appear to recognize all of the RAM installed on the server. The BIOS is reporting 26GB however top is reporting: Mem: 15720140k total, 418988k used, 15301152k free, 30256k buffers Swap: 17956856k total, 0k used, 17956856k free, 135536k cached and free is reporting: total used

I''ve got a client demanding the use of HP DL380 G5''s, for various historical reasons, for a server room. I''m going nuts trying to figure out if the available CPU''s for them support VT, so I can avoid building them a separate Windows box. Unfortunately, the local web proxy is overloaded, so actually browsing the JavaScript/image loaded web pages for HP is

Author: krgopi Repository: /hg/zfs-crypto/gate Revision: a813fd7825c4b1d3fb282c08cdf80bc9ffa88a1a Log message: PSARC 2005/654 Nemo soft rings 6306717 For Nemo based drivers, IP can ask dls to do the fanout Files: create: usr/src/uts/common/io/dls/dls_soft_ring.c create: usr/src/uts/common/sys/dls_soft_ring.h update: usr/src/uts/common/Makefile.files update: usr/src/uts/common/inet/ip.h

Is there a cable length limit to use with a fxsmod (TDM400B) ? I noticed that if I use a very long cable 148 feet, I can hear some parasite : I hear the radio ! If I use a short cable, there is no problem... Thanks for help, St?phane HENRY

This patch adds mergeable receive buffer support to qemu-kvm, to allow enabling it when vhost_net supports it. It also adds a missing call to vhost_net_ack_features() to push acked features to vhost_net. The patch is relative to Michael Tsirkin's qemu-kvm git tree. +-DLS Signed-off-by: David L Stevens <dlstevens at us.ibm.com> diff -ruNp qemu-kvm.mst/hw/vhost_net.c

This patch adds mergeable receive buffer support to qemu-kvm, to allow enabling it when vhost_net supports it. It also adds a missing call to vhost_net_ack_features() to push acked features to vhost_net. The patch is relative to Michael Tsirkin's qemu-kvm git tree. +-DLS Signed-off-by: David L Stevens <dlstevens at us.ibm.com> diff -ruNp qemu-kvm.mst/hw/vhost_net.c

I would just like to get a refresh of the situation for Australian users. It would seem that the TE400P is currently available and is likely to acheive approval for use in Australia within the next 2 months ? (when is the end of summer?). Once this is done, it will certainly suit larger installations, but it still leaves a number of 'gaps'. Anyone with analog phone lines will need

Hello List, Im just dipping my feet into the asterisk world, and im having major fxo problems Im running Asterisk (from svn) + libpri (from svn) + asterisk-addons (from svn) + asterisk gui (svn 1.4 branch) + zaptel (svn 1.4) on a Debian Etch box, with 1gb ram, running all of the services for my home server (web / db / music server etc), and i would like to run my PSTN line from Kingston Comms,

I know most of the motherboards based off of the Intel Q35 northbridge usually have VT-d options for it to be enabled or disabled in the BIOS.  I''ve heard the same for Intel 5400''s and Intel 3200/3210''s but been looking through manuals for various server boards and don''t see VT-d options in the BIOS. However, I was wondering if anyone had success stories or

Hi there, I'm implementing samba as ADS domain member server with samba and ldap authentication. There is an extension of the AD schema to be performed, right? What is the tool that does that? Thanks in advance Jo?o Carneiro Departamento de Sistemas e Tecnologias da Informa??o jcarneiro@dls.pt DLS - Projectos Automa??o e Manuten??o, Lda Tel.: 227 470 786 :: Fax: 227 470 787

Hi, I have some problem when I tried to install R from source: work as root cd /root/dls/R-patched # this is where I unzip the file: R-patched_2005-06-08.tar.gz make clean # i need my R_HOME=/usr/lib/R and I need to create libR.so for RSPython, so I did: ./configure --prefix=/usr/lib/R --enable-R-shlib make But I found the R is built in /root/dls/R-patched/bin instead of

Hi All: Has anyone tried using an LSI MegaRAID 320-2E PCIe RAID Controller in an HP DL380G5 (of any HP G5 DL for that matter) running CentOS 5? It looks like it should work but it would be nice to know that someone has already done it before I start going to all the effort and expense of building the box. I have a spare DL380 and a couple of IBM EXP400 disk arrays that I would like to configure

Ok, I am going for A@H with the CentOS iso disk. Installed and just checking a few things out. My other question is this, which I forgot to ask before. We have no Broadband here and more than likely will never have, so I am just looking at building Asterisk to handle inbound and outbound calls, at home via a ISDN card and for my hotel job via a PSTN line setup. Is this very complicated to setup

Author: Darren Moffat <Darren.Moffat at Sun.COM> Repository: /hg/zfs-crypto/gate Latest revision: 957d30a3607ed9f3cbe490da5894d1e1b2104033 Total changesets: 28 Log message: resync onnv_105 partial for 6713916 Files: usr/src/Makefile.lint usr/src/Targetdirs usr/src/cmd/Makefile usr/src/cmd/Makefile.cmd usr/src/cmd/acctadm/Makefile usr/src/cmd/acctadm/acctadm.xcl

I have just realized while trying to research asterisk not acking incoming calls that the tdm400b card is stamped rev H, but when I issue the zap show status command in the manager interface, it indicates Wildcard TDM400P REV E/F Board 1 Which do I believe?? -- Best Regards Greg Cirino Spam and Virus Free Email included with every email account Cirelle Enterprises Inc. 25 Indian Rock Rd

I'm rolling out an installation with snom 360s in the near future. Simple SOHO configuration, 3 FXOs hanging off a TDM400B, 4 snom 360s, a snom 200, some variant of IAX softphone, and an IAXy or Sipura 2002. I have the 360's set up to subscribe and notify for the line use lights, which works like a charm for interoffice calling (between the 360's, anyway. The IAXy, 200 and,

Dear All, recently our customer met some udp checksum error in v40z, we have done below testing: Sending: v40z, solaris 10 update 2 with 125121-03 patch receiving: v40z with solaris 10 update 2 and a PC-server with windows 2 receiving host connect in the same network switch. in sending v40z, we set ip:dohwcksum=0 in /etc/system. The sending peer send out packets at about 40M/s, the windows

I have 2 questions regarding asterisk logs that I really hope someone can help me with. Jan 7 09:40:14 WARNING[1009517568]: File chan_iax.c, Line 3537 (registry_rerequest): Received unsolicited registry authenticate request from '209.242.15.34' I get this IAX message every minute or so. I have 2 asterisk servers that both register with each other. I can post the configuration again,