similar to: IAX2 - DualServer Problem

Hi people, i have problem with IAX2 between two asterisk PBX. When i try call some number i get "INVAL" packet, but when i try call same number via OpenVPN (is between this two asterisk) call is working fine.So i debug communications and here is my opinion ... Schema of connection: Asterisk1 -> ADSL router with NAT -> INTERNET -> Asterisk2 A)Calling directly via public

I'm starting to get this to work! Well I got Voice Mail to work! All calls goes to voice mail without ringing the users phone (iaxComm). Here is my iax.conf and my extensions.conf Any help would be great!! Thanks -------------- next part -------------- A non-text attachment was scrubbed... Name: extensions.conf Type: application/octet-stream Size: 1039 bytes Desc: extensions.conf Url :

What settings are people using? I've seen the ones from dslreports but I'm in that lucky group of people that paid the 1 euro just to have it no longer work. Even after I setup a additional account over the weekend it still doesn't work. And, of course, etherreal only shows encrypted traffic so I can't snag any config settings from it. Any assistance? -----Original

On the asterisk1 I got this: register => username:secret@ipaddress2 [eop] username=username secret=secret type=peer host=ipaddress1 auth=md5 on the second box I got this this host is ipaddress2 [incommingiax2] username=username type=user secret=secret host=dynamic context=from-internal-custom auth=md5 on first host 1 am getting: Jun 22 14:42:10 NOTICE[2398]: chan_iax2.c:7411

Hi, I have two asterisk servers one is connected to the PSTN and the other one is connected to SIP users. The two servers connect with each other using IAX. When I have an incoming call from PSTN to the asterisk servers and have a forward to go back out to the PSTN the two IAX channel bridge together. Now every time I dial a DTMF digit, the asterisk is sending two DTMF digits. I enable

I have something going on that I don't fully understand after a weekend of looking for answers. I have an iax account with Tesco that works flawlessly with the Zoiper client - but is giving me trouble with inbound calls in Asterisk 1.6. After some playing I have ended up with an iax.conf file that looks like this: [general] calltokenoptional = 77.75.0.0/255.255.248.0 maxcallnumbers = 16382

Hi, I created an iaxtel account, and was given a password containing an "@" character. The directory pages imply that they change the web login password only. How do I reset my IAX password so that it is usable in the iax.conf file? Thanks, Steve

All, I run a bunch of (well 20+ actually) Asterisk boxes at home, work, friends and the lie with our own dialplan in the form 8EEXXXX where 'EE' is the exchange number and 'XXXX' is the extension number. This arrangement has been in for 2+ years and worked well with a central box (asterisk.thorcom.net) acting as the routing hub and SIP exchange point with various public

I'm new to this list, and I apologize if this is an already answered question, but my Google-fu was not strong enough to find the answer if it was. I'm having a problem with DTMF on incoming IAX calls. For the first few seconds of the call (between maybe 1 and 15, it varies from call to call) everything works fine. After that I continue get DTMF_E messages from the remote IAX server

I have a PSTN termination provider "foo" which will accept standard U.S. calls in the form 1<10 digit ph#>. I have an outbound route named "foo", with dial pattern "5|.", with the only entry in trunk sequence being "IAX2/foo". I have an X-lite local extension, on which I can dial 51<10 digit ph#>, and asterisk will call out over foo and the

Hi all, I am trying to connect to a softphone application using an Iax channel on Asterisk 1.4.30. I can do outbound calls, from softphone to asterisk, but not inbound from asterisk to softphone. I get the following Debug: ---------------------------------------------------------------------- ---------------------------------------------------------------------- Tx-Frame Retry[000] -- OSeqno:

Hi there. I am trying to connect Asterisk to a local danish ip-telephony provider. But is having some difficulties. First I thougt they were related to the provider. But then i started debugging on the Asterisk (aix2 debug) When I make a call using AIX to the provider everything seems to work just fine: *CLI> -- Accepting AUTHENTICATED call from 192.168.1.150, requested format = 1024,

Can any one help? Thanks. we have two * servers (Version 1.2.1) and one 1.09 server. Calls between these two 1.2.1 servers have odd behavior. But call from 1.09 to 1.21 server working fine in either situations. See below pls: Local server iax.conf [tosyd] username=mel type=peer secret=xxxx host=198.168.2.66 remote server iax.conf [mel] type=user secret=xxxx host=198.168.2.67

Hi, I'm testing an upgrade from 1.4.18 to 1.4.37 in a VM prior to putting it into production. Ive done this by installing 1.4.18 onto the VM, putting my config files in place and then installing 1.4.37 over the top (which is what I'd have to do on production). I've found a few issues in the config files, but nothing I couldn't handle until... I hit inbound IAX issues. My

hallo, i am really confused how nativ briging is working with asterisk, i use a asterisk server as central server and register another asterisk and an iaxcomm client to the server, all three have public ips on the internet. somtimes, when i call from iaxcomm to my asterisk, the calls go peer to peer (i can see it with tcpdump) but sometimes the get routed through the central asterisk server

Hello all, this is my first post here. Sorry for my english. Gentoo LAN router, 2.4.26-hardened-r2 There are 2 WAN links, one LAN link. I am doing some iptables/routing/tc magic in my scripts. What''s interesting is marking packets traveling from all IP''s in LAN. Interesting commands are: ------------- for ip in `seq 50`; do $IPTABLES -t mangle -A FORWARD -o eth2 -d

[ Sorry, I incorrectly copied some Reference headers into this post and tacked it onto the wrong thread. -Steve ] So far, I have been able to receive incoming iaxtel calls via my assigned 1-700-xxx-xxxx number, but only when using md5 authentication in iax.conf: [iaxtel] type=user ; Incoming calls only context=incoming auth=md5 secret=<mysecret> ; Required for

I've been having problems with incoming IAX2 calls - some work, but a large fraction are answered with "dead air" or disconnects from my IAX provider. Disabling the jitterbuffer seems to eliminate the problem (so far)! Has anyone else seen this? I'm using 1.2.6, but I'm not sure what my provider is using. A snippet of the a failed incoming call IAX2 debug is attached

Anyway, in my P.S. yesterday (the main post was on Codec problems), I described a situation where any IAX softphone was registering successfully, and then having zero sounds heard on either side of the call. Here is an "iax2 debug" output from a DIAX call to a local * server, dialing the extension that goes directly to the "demo" application. AsteriskHouse*CLI> iax2

Hi, I'm using http://www.portunity.net/ I configured now asterisk with the following setup: iax.conf: register => XXXXXXX:YYYYYYY@iax.iaxport.de [portunity-out] type=friend host=iax.iaxport.de username=XXXXXXX secret=YYYYYY context=incoming-portunity notransfer=yes [guest] type=user context=default ;callerid="Guest IAX User" And in extensions.conf: [default] ;exten =>