similar to: Knowing zap channel status

Apart from religious grounds (!), is there any pros or cons why I should choose one over the other for a new install of asterisk ? Julian

Can I run two instances of asterisk sharing a single te412p ? I want to be able to have several asterisk servers (for testing various scenarios) running on one server. I was wondering if these asterisk processes could share a zaptel/dahdi card nicely. Julian

getting some errors on my test system. this is 1.4 (Asterisk SVN-branch-1.4-r214194) with a 4 port T412p card. Three of the ports are connected: Span 1 to the PSTN on a 10 channel bearer line, ports 2 and 3 are cross-overed (!) to each other. Port 4 is not plugged in. This has been working fine for several months. I updated a few days ago to the latest 1.4 branch. However, now I cannot dial into

Hi all, I would like to make a script/program that would be able to show lots of status information from my analog FXO lines (and FXS lines in the near future). Example of interesting status information: - Hook status: is there a call being made with that zap? - Voltage status: cable connected, voltage values (if possible), line ringing? - RX/TX Volume status I'm using a TDM400 card with

hello, I got those extensions: exten => 555,1,MeetMeCount(500|count) exten => 555,2,Gotoif,$[${count} = 1]?6 exten => 555,3,Meetme,500|pMs|1234 exten => 555,4,Playback,goodbye exten => 555,5,Hangup exten => 555,6,Goto(from-internal-custom,556,1) exten => 555,7,hangup exten => 556,1,System(/bin/cp /etc/asterisk/1-test /var/spool/asterisk/outgoing/) exten =>

Hi, For debugging purpose, it might be useful to repeat every 30s or so, pri show span and zap show channel commands have the results merged with /var/log/asterisk/full log file? Any better idea than running an dedicated shell script with a "asterisk -rx pri show span 1" line ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Does any one know how to change astmanproxy to be able to a) compile without optimisations b) dump a core I've had it crash several times over the past couple of months, but there is no way to debug what's going on. I like the way a core is produced when (if!) * crashes, and would like to have the same thing on astmanproxy. Thanks Julian

What options are available for installing an asterisk system onto a bare-metal system ? Ones that I have seen: pbx-in-a-flash trixbox astlinux What I am trying to achieve is to be able to shove a cd / usb into a machine and have it install asterisk, complete with my .conf files. I also need Cepstral installing. Ideally, I would like to be able to mount an .iso file, chroot into it, and

Hello, I have a strange problem with one of my Zap channels. A user told me that he was in a voicemail system during a call, hit the Flash button, and the call hung up. Now we get no dialtone on the phone hooked up to the channel. Here's the status of the channel: jmartin at rogue:~$ sudo asterisk -r -x "zap show channel 7" Parsing /etc/asterisk/extconfig.conf Channel: 7 File

* is having permission problems accessing /dev/zap/channel. When I look, these devices (everything in /dev/zap) shows root.root for uid and gid. If I start Asterisk from the command line, it runs fine (running as Root). When I start it as a service, I get Oct 19 23:02:55 WARNING[10587] chan_iax2.c: Unable to open IAX timing interface: Permission denied Oct 19 23:02:55 WARNING[10587]

Just to share some experience with everyone about what happened today to our Asterisk 1.4 box with Digium TE412P card. We had an unscheduled power outage which shut down the Asterisk box. When the power went up, Asterisk came back up okay but the ports on the card were all red. Zttool show red alarm and cat /proc/zaptel/1 show red alarm today. Both incoming and outgoing cannot be made. When a

Hi! I have a very strange question. I'm using trixbox with Asterisk 1.2.23-BRIstuffed-0.3.0-PRE-1y-j. I configured and installed the HFC ISDN card with a script, as here: http://www.trixbox.org/forums/trixbox-forums/help/how-install-hfc-card-trixbox Now i have 6 SIP hardphone, and softphone, using 1 SIP trunk to call out the world, and 1 ZAP ISDN trunk to receive calls from the world. The

Because of a kernel upgrade i needed to recompile DAHDI. Dahdi 2.0.0 with 2.0.1 was working ok, after the reboot and compile it doesn't start anymore. Firstly it tells me it is using /etc/zaptel.conf which is deprecated, if i remove that file it complains that this file is missing..... Secondly i get an error about a missing dev file which refers to zap (which seems strange to me because

Well, I'm experiencing a similar problem with my setup... debian etch, asterisk 1.4.2, zaptel 1.4.1, ... I cannot find the chan_zap.so module file anywhere, tried recompiling with zaptel 1.4.0... no change... I tried 'make menuselect', and going to the channels-part, chan_zap is marked XXX -> dependencies missing: and this is the message for it, as an explanation. Zapata Telephony

Dear List; How can I place a call via Zap/g1 (group) but need to determine the line (FXO port) that will go via it? Also, how it will be possible to assign an dedicated line (connected to FXO) to an button on the Polycom IP Phone or Broadtel IP Phone, so if user select that button then he will be sure that his outside call will be via that specific line. Regards Bilal

Dear Folks, Im looking for a way to detect if an analog line is connected to card or not (Im using Sangoma A200). Im using the dialtone detection when dialing but need a way to detect the disconnection of the line when it actually happens. Anyone have any hints or tricks for this? Regards. -- Mohammad Sh. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I've noticed that a small but meaningful quota of calls from my Alcatel PBX to Asterisk are failing. This does not always happen and it is not easily reproducible but on high traffic I do get a large number of cases. Example: Alcatel PBX extension 7085 calls Asterisk PBX extension 6145 over a PRI E1 link. I see this in the Asterisk log: Dec 14 14:10:31 VERBOSE[11378] logger.c: --

HiI don't have any digium cards and only want to install ztdummy with all asterisk functions. What I will need with ztdummy and what I can disable?Thanks a lotDmitri************************************ Zaptel Module Selection ************************************* Press 'h' for help.

I've looked over EVERY resource I can find, but have run short of a solution. I'm running CentOS 4.4. Just installed Asterisk 1.4 and Zaptel 1.4 and libpri, but when I run ztcfg I get this error: line 0: Unable to open master device '/dev/zap/ctl' I realize this is a udev error (or from what I've read), but I cannot find out how to resolve this. I've reinstalled zaptel

Hi All I've got an asterisk system, using a couple of Xorcom Astribanks to provide FXS ports. (I'm using the zaptel 1.2 branch, if that matters) I've noticed that the ringing volume is a lot louder than on our old phone system, and people are starting to complain it's too loud. (This is the noise the phone makes when it rings, not the noise in your handset when you ring