similar to: Where to find t38modem

Hi All, I know that this may not strictly be an asterisk issue, but if anyone has any ideas on this prob it would be appreciated. I have a working asterisk setup using Suse 9.1, a BT ISDN BRI card (Fritz?), sipura 3000 and a few cisco 7940's. I wanted to do add faxing into the equation, so I thought I would try and setup the following: PSTN->asterisk->hylafax->pc At the moment

Hi, I hope you might give me some hints on how to find where my configuration is wrong, I am new to Asterisk and do not know, how to find the problem. Running Asterisk (version: 1.8.13.1~dfsg-3) on Debian Wheezy. On the same maschine: Hylafax fax server. I want hylafax to use t38modem (a virtual T.38 modem) for sending faxes. t38modem schould connect to asterisk on the same host. If hylafax

I have already tried to contact to persons from Digium and I did not receive a response. I was wondering if there is any plan to support fully faxing in Asterisk, I.E.: A "T38 Gateway" of sorts.

can anybody help me to choose the most reliable fax solution for * . after googling the net i found that there are at least two solutions for this, app_rxfax+spandsp and iaxmodem+hylafax. - what's the differences between these two? - which one's better? why? thanks

Hi, I've read this thread in this list history http://article.gmane.org/gmane.comp.telephony.pbx.asterisk.user/261151/match=t38modem http://sourceforge.net/tracker/?func=detail&aid=3337581&group_id=152230&atid=783657 Has anyone been successful when integrating latest version of Asterisk (10 or 1.8, for instance) with t38modem ? My target setup is: fax ---<PSTN>-- SPA3102

Is it possible to use openh323's t38modem with asterisk and spanddsp? or would hylafax have to be thrown into the mix? If it is possilble how would I go about getting astersik to see it?

Hi all, I'm installing Hylafax on my Asterisk system. From what I've read, I can either use IAXModem or T38Modem to provide the virtual fax device. So at the risk of starting a religious war, which one should I use? I don't mind running IAX if I have to. I want as much flexibility and stability as I can get. So, what are your recommendations? Mike. -------------- next part

Hi, I'm trying to use Hylafax without a modem. Is it possible to use t38modem to make Hylafax send and receive fax via Asterisk? If yes, how? I'm searching on internet but still haven't found anything useful. TIA GIorgio Incantalupo

Hi! I'm trying to get t38modem working and started with the loopback mode. I installed everything according to http://www.voip-info.org/wiki/view/T38modem+configuration+with+Asterisk and used a stock asterisk 1.4.20.1 compiled from source. Openh323, ptlib_unix and t38modem are compiled from source as well, as outlined on the wiki. Hylafax starts sending the job (sudo faxstat -s shows one

Hi, I am trying to fix a Asterisk setup with buggy (POTS) Fax machines. The setup consists of the following components: - A Digium TE121 for connectiong to E1 ISDN - Debian box with Asterisk 1.4 - Grandstream GXW-4008 SIP ATA to which the Fax machines connect I am aware of the problems with this type of ISDN <-> Asterisk <-> SIP ATA <-> Fax machine installations, e.G.

Dear gods of the PBX (flattery works here, right?) - I've been pulling my hair out trying to get Asterisk to receive and decode a fax using spandsp and app_rxfax. It seems like it should be working. The fax machine on the other end connects and Asterisk reports a fax coming in. But when it's done all I have is a 2 or 3 KB TIF (see attachment). The console activity looks completely

Hi, Do you have any example showing how to use SendFAX ? I can see several examples of ReceiveFAX but not a single one showing SendFAX. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081127/b41ca08b/attachment.htm

Hi, I think this is one area that needs to be developed. I am curently implementing a system for my home so cannot really justify the cost of financially supporting the development of this when all I really need to do is buy a telephone extension lead for my existing fax modem!!! I am more than willing to devote some testing/documentation time (I am not really a programmer) if that helps.

August 5th, 2005: Craig Southeren announced today that OPAL (http://www.voxgratia.org) now provides support for the IAX2 protocol(Written by Derek Smithies and released under the MPL). This support allows you to use chan_woomera (http://www.pbxfreeware.org) driver developed by Anthony Minessale II to interconnect your asterisk systems and use the IAX2, SIP, and H.323 protocols. I would

*Update Jul 2007:* For a T.38 gateway you can use Asterisk 1.4's T.38pass-through support in combination with the new OPAL (Open Phone Abstraction Library) - using t38modem (currently CVS) which now supports SIP (and not just H.323) to terminate T.38 calls. You can also use OPAL and chan_woomera to do essentially the same. Where can you find this t38modem stuff ? Google replies things that

Hello! I'm still trying to get a working t.38 configuration w/ pjsip. I'm now able to send t.38 faxes to my own extension: hylafax -> t38modem -> extension -> extension -> t38modem -> hylafax. The fax is sent by t38modem. The receiving part of t38modem accepts the call, sends ReInvite for t.38 and things are working as expected. Now, let's do the nearly same

Hi, I have a question: In my company a have a 100% IP Telephony implemented (Cisco Phones, Routers, Switches, etc). We are connected to our operator by two E1 lines. The PBX is on operator side (a H.323 Gateway is configured on call manager). I study the possibility to implement a Hylafax server. In some sites I read that with the IAXmodem is possible to have virtual modems, with don't so

On Fri, Jun 16, 2017, at 10:49 AM, Michael Maier wrote: <snip> > > t38modem and asterisk are using > > m=image 35622 udptl t38 > ^^^^^ > > Provider uses > > m=image 35622 UDPTL t38 > ^^^^^ > > Could this be a problem? If I'm sending internal only, it's always > lowercase. Looking at the tests we have we

Hi all, again I try configure Hylafax with asterisk. I would like configure Asterisk in the next way: 1)An incoming fax go into through X100P 2)Asterisk detects Fax and redirect fax to Hylafax Is it possible? Any idea woluld be great idea? regards, srsergio -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.296 / Virus Database:

Hi, I'm putting together a fax solution for my company that utilizes T.38. I wanted to throw out my plan and get some feedback if anyone is doing something similar or sees a blatant problem with it. We're currently rolling out SPA-942 phones for the standard desk phone with vanilla Asterisk 1.4.15 (just upgraded it today) on the back end. Most calls for satellite offices are handled by