similar to: No subject

Should be mailbox = 7752365815@vpbx-wpti Best Regards, Ben Bawkon --------- Original Message --------- From: Bruce Komito To: <asterisk-users@lists.digium.com> Subject: [Asterisk-Users] voicemail notify problem on sip extension Sent: 5/19/2004 4:27:51 PM I'm having a problem with the voicemail notify feature. Although I have the voicemail box configured for the sip extension, the

I have a problem that is almost certainly nat-related, but I can't figure out what's happening. Since moving the Sipura behind a NAT server (Linksys), I am no longer able to call between the two lines on the same Sipura. When I dial one extension from the other, it rings, but immediately after I pick up the ringing phone, the call is uncerimoniously dumped. I can tell the call

Hi, I'm having an issue where some phones behind a sonicwall are auto-congesting. The status on "sip show peer" shows ping times anywhere from 80ms all the way up to 1100ms. PCs behind the same firewall have a ping time of about 30ms to the PBX itself. Does anyone know if the sonicwall is inserting delay into the SIP signaling path and lagging the OPTIONS messages for qualify?

Is there some magic to compiling asterisk-addons-1.6.0 under Debian 2.6.18 and mysql 5.0? I am unable to get configure to recognize the existance of mysqlclient. Imparticular, when it gets to: checking for mysql_init in -lmysqlclient... it returns "no". For the past several releases, I've had to hack or otherwise coerce this to work, but this time, no amount of fiddling with

Don't forget to add the #PRE after the host info; that way it preloads it. Create one lmhosts file for the Win boxes, and copy to either \windows (win9x) \winnt\system32\drivers\etc (NT/Win2k/XP) then open a DOS Prompt and type nbtstat -R to flush/refresh the cached info. The samba box's hosts go in /etc, /lmhosts go in /etc/samba (if you're using the current defaults. Put the

Hi all I have a few Polycom 331's but after following allot of advice I can't get them to provision from a dhcp boot server. We have a sonicwall router in place. I can press setup and set the FTP boot server to my * box. From there th phones boot fine. But I cannot get them to autoprovision. I have tried dhcp option 66=ipaddres. 66=FTP://PlcmSpIp:PlcmSpIp at 192.168.1.1/ u ahve also

Hi all, I currently have an Asterisk test server behind a TZ170 Sonicwall firewall / NAT box, with several DIDs. I've found that inbound IAX2 calls don't work reliably (i.e., I get a busy tone) unless I enable "Use Consistent NAT" in the Sonicwall. This feature is poorly documented by Sonicwall, so I thought I'd pass it along. Has anyone else run into this, or figured

What options do the others offer over one another? Is there a difference, or is it simply a case of one superseding the other? Would be good to put something together that details the different methods, and which situations maybe they better suit, if any. Ben -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of

I've searched the archives a bit and have not really come up with a good answer to my queries. I have * running on a RH9 box behind a LinkSys NAT box. I can talk with iConnectHere outbound just fine. I am trying to configure an inbound Xten softphone from outside. I have that user set as NAT in sip.conf (seems to help), but I still cannot establish a full session. I think the problem comes

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Hello All: I have a situation where I have a Samba box (RH 7.3 w/samba 2.2.4) that I set up for a client. Another consultant came along and installed a VPN using SonicWalls between the main site and a remote site. So now they want the remote users to save files on my Samba box. No problem except that the remote users can't see my local workgroup or any of the local machines. Here's

Hi, I want to be able to specify actions for different classes of traffic in any of these four ways, and I''d like to use only HTB if possible: 1. No guranteed rate, No ceil 2. Guaranteed rate, No ceil 3. No guranteed rate, Ceil specified 4. Guaranteed rate, Ceil specified For types 2, 3 and 4 there can be several classes of each, with different rates and ceilings. 4 is ofcourse easy.

Greetings, I tried to build astcc, but the Makefile is looking for Asterisk/AGI.pm. Anyone have any idea where this file is supposed to be and where it comes from? I've dragged in everything I can think of from cvs, and * is otherwise running fine. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

I've been using realtime to store my voicemail configuration in a mysql table for several months now, and have had no problems...until today. A few weeks ago, I upgraded to the latest CVS and today I noticed voicemail is not updating the password when the user changes it through option 0. I'm not sure when this started happening, but I assume it was sometime after I upgraded. Has anyone

On Sun, Sep 28, 2014 at 4:32 PM, Kristian Rasmussen <kristian_rasmussen at fastmail.co.uk> wrote: > The entire command should be on one continuous line, and the double > quotes need to stay. I probably should have posted this as a pastebin link to retain carriage returns and such. Mailing lists have a way of mangling stuff like this. :-) Try this: http://pastebin.com/2hTBU8XF

On Mon, 4 Mar 2019 21:28:19 +0100 Reindl Harald <h.reindl at thelounge.net> wrote: > > Am 04.03.19 um 21:18 schrieb Mark Foley via samba: > >> It shouldn't, you normally only have one gateway, it is by definition > >> the 'gateway' to the WAN & internet, so I would use the same one on all > >> your machines. > > > > The LAN host

There is a SonicWall Pro 2040 to which I successfully established a VPN tunnel under Windows XP using SonicWall VPN client. Now, I'm looking for a way to establish a VPN tunnel to the same SonicWall device under Linux. Installing the SonicWall VPN client under wine 0.9.27 failed ans as far as I understand a posting of 2006 it's doubtful if this type of software will ever be installable

Asterisk apparently has five echo cancellation algorithms: STEVE, STEVE2, MARK, MARK2 and MARK3. The current default appears to be MARK2. My question is, has anyone had any experience with any of the others (other than MARK2), and is there some conventional wisdom as to when to use one over another? TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

Hello Has anyone else run into a problem with dovecot pop3 and sonicwall? A week after switching to dovecot we had two local customers call and report they could no longer download emails with attachments. It turned out to be the email macro filter on the router. After the first report I thought maybe the customer had just changed something or it was a fluke, but then a day later we had the

Following a(n apparently) failed attempt to upgrade a BT102, the phone is now brain-dead. Although it still has enough smarts to get a dhcp address and try to download the firmware and config, it never gets past the blue screen, nor will it respond to pings or port 80. Short of sending it back to Grandstream, is there any way to recover the phone? TIA Bruce Komito High Sierra Networks, Inc.