similar to: No subject

[priv] type=friend dbsecret=dundi/secret context=longdistance Hope this helps, in your case Dundi will save you a world of work on configuring that many systems, in fact if you structure Dundi like spokes around a small number of master servers, the config gets real easy.Let me know how it goes. On Wed, Apr 16, 2008 at 8:41 AM, Jeremy Mann <jmann at txhmg.com> wrote: > > > >

I have three Asterisk boxes. Each has the following in dundi.conf: 180net => dundi_local,0,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx1,1,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx2,2,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx3,3,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial My iax.conf on all three

Hi peeps, I've been struggling with DUNDi for a few days now and I can't seem to make call from Asterisk A to Asterisk B. If I do a "dundi show peers", it finds the other peer but I can't seem to make any calls. Can anybody help me out here. Here's the situation: Machine 1: Debian with Asterisk 1.4.4 --> 192.168.1.103 Machine 2: AsteriskNOW --> 192.168.1.69 The

Hi all, I'm new in asterisk and I got to set up a dundi config for my work. I have 2 PBX for the test, the two PBX are in the same local network PBX A : 192.168.199.23 PBX B : 192.168.199.21 my config files : (on PBX B , the config files on PBX A looks like it) /etc/asterisk/dundi.conf [general] bind=192.168.199.21 port=4520 cachetime=5 ttl=32 autokill=yes entityid=00:30:18:4C:33:53

It seems that I am having a heck of a time explaining my attempts at distributing ACD Queues to the list. Here's one little problem, that's only a piece of the puzzle. dundi.conf: 180q => global_dundi_q_pbx1,100,IAX,dundi1:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => global_dundi_q_pbx2,200,IAX,dundi2:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q =>

Hello, I have two asterisk servers and I would like to merge their dialplans. I thought DUNDi would be a natural choice. I created the following configuration on the first server: iax.conf Code: [dundi] type=user dbsecret=dundi/secret context=dundi-local dundi.conf [general] ttl=4 autokill=yes cachetime=30 entityid=00:06:5B:8E:B0:08 secretpath=dundi bindaddr=XXX.XXX.XXX.XXX port=4520

Hi All, I've been banging my head on a small dundi problem... I have two * servers setup, both have almost identical dundi.conf files: root@tsjonge:/opt/asterisk/etc# cat dundi.conf [general] department=thuis organization=pipsworld locality=Amsterdam stateprov=NH country=NL email=remco@pipsworld.nl phone=+31207508308 ;bindaddr=0.0.0.0 ;port=4520 entity=00:02:b3:49:69:5e ttl=16

Hi few weeks ago I read about redundancy (HA) of asterisk boxes using DNS, DUNDi, so I decided to give it a try. OS FreeBSD 6.1-RELEASE, asterisk 1.2.7.1 on one peer I get: lk110*CLI> dundi show peers EID Host Model AvgTime Status 00:11:43:3d:69:e6 195.28.109.37 (S) Symmetric Unavail OK (1 ms) 1 dundi peers [1 online, 0 offline, 0

>From the reading and testing I have done it doesn't look like SIP supports a username and password in the Dial string. I currently have the following mapping. priv => dundi-extens,0,SIP, dundi:pass at 1.1.1.1/${NUMBER},nounsolicited,nocomunsolicit,nopartial On the sending side I see NOTICE[31598] chan_sip.c: Conflicting extension values given. Using 'dundi' and not

Dear community, Please help. I've been looking around the internet (and in this great forum) for help with DUNDi setup between servers (I'm using Elastix) and while I can get my servers to lookup extensions on each other very well, I have not been able to successfully make calls between servers. For my test environment, I have 3 servers setup for now, and these are the steps I've

Hi, I'm having difficulties with using DUNDi between two servers. If it were three I think I could control looping by limiting TTL, but with two I'm not sure how to prevent a loop causing bad things to happen. I've tried ttl=1 but things still blow up. The DUNDi configurations are pretty simple and work just fine in both directions as long as only one of them is using the switch

hi, I have the following configuration: Grandstream --> NAT (Netgear RP614)-->Internet-->Asterisk(public IP) i can register fine and call ringing is working as good. The problem is = i cant hear audio both ways and i get this error: WARNING[22544]: File rtp.c, Line 375 (ast_rtp_read): RTP Read error: Resource temporarily unavailable my sip.conf file is as follows:

> -----Original Message----- > From: Watkins, Bradley [mailto:Bradley.Watkins@compuware.com] > Sent: Thursday, June 15, 2006 10:36 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: RE: [Asterisk-Users] DUNDi Not Able to > HandleComplexFailoverSituations > > > Is it possible for you to explain in more detail the > situation involved.

Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Executing [1000 at ext-meetme:7] Read("DAHDI/2-1", "PIN|enter-conf-pin-number||||") in new stack Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Playing 'enter-conf-pin-number' (language 'en') Jan 19 10:00:43 VERBOSE [7177] logger.c: -- USER ENTERED 'THE PIN NUMBER' Jan 19 10:00:43 VERBOSE [7177] logger.c: --

[general] port =3D 5060 ; Port to bind to bindaddr =3D 0.0.0.0 ; Address to bind to A realm=3D192.168.0.2 context =3D default ;Default for incoming calls [5549] disallow=3Dall = allow=3Dulaw allow=3Dalaw allow=3Dgsm type=3Dfriend ;(inbound and = outbound calls accepted) secret=3Dlocalphone ; obvious password for = testing host=3Ddynamic callerid=3DJason White <5549> dtmfmode=3Dauto

the CNAM info in the Q.931 call setup message. I've tried all permutations of switchtype (dms100 & national) and facilityenable that I can think of, but I still don't see CNAM coming out the other side. Telco confirms that "Name Out" is enabled on our PRI. Any pointers on what I'm missing, and/or how to debug further? zapata.conf: --- [channels] context=3Ddefault

Hello, today I tried to update 2.0.12 to 2.0.13, but I got those messages, only: Aug 1 10:20:27 mail dovecot: master: Dovecot v2.0.13 starting up (core dumps disabled) Aug 1 10:20:33 mail dovecot: imap-login: Login: user=<***@***.**>, method=PLAIN, rip=192.168.1.99, lip=192.168.1.1 , mpid=5123, TLS Aug 1 10:20:33 mail dovecot: imap-postlogin: Error: script-login: Error: user ***@***.**:

I'm looking at finding a way for my Macro(dundi-dundi-test,${ENTEN}) when I dial out on the dundi-test network to return a +101 to my [dundi-test-out] context, if the number being dialed on the dundi-test network does not exist, then I will route the call out using my pstn or voip connection i have. I have a feeling it will have to be the switch => DUNDi/dundi-test that will have to return

We need to make sure that all queue applications run on the correct system that the user agents that own the queue application are registered to. So when a server fails and the user agents register with their secondary server (which will always be configured to be the same server for those related agents) the queue application is running on that server and routed to correctly by it's peers.

Hi. I am trying to pass a variable from one Asterisk PBX to another. I'm using DUNDi with IAX2. Is there a way to do it? I tried the following but it fails. On peer1: [dundi-outgoing] switch => DUNDI/priv exten => s,1,Set(CDR(userfield)=test) exten => s,2,Set(DUNDIVAR=${ARG1}#TEST) exten => s,3,NoOp(Passing ${DUNDIVAR} to DUNDi peer.) exten => s,4,Goto(${DUNDIVAR},1) On