Displaying 20 results from an estimated 10000 matches similar to: "No subject"
2008 Jan 12
1
ISDN channels not properly released after call
Hello everyone,
I'm using very simple setup to make and receive external ISDN calls through a
softphone (x-lite version 3.0 - Win32) via an asterisk box.
Hardware setup:
- Dialogic Diva BRI (lspci yields: Network controller: Eicon
Technology Corporation DIVA Server BRI-2M/-2F (rev 01))
- ISDN BRI line
Software setup:
- Redhat 9
- asterisk-1.4.16.2
- chan_capi-1.0.2
Asterisk configuration
2007 Jul 12
0
No subject
1. If the other end picks up the phone the conversation is successful and when
the conversation ends, the channel is properly released:
-- CAPI/ISDN1#02/2104988888-0 answered SIP/1000-081d91b0
== ISDN1#02: CAPI Hangingup for PLCI=0x101 in state 2
== Spawn extension (internal, 2104988888, 1) exited non-zero on
'SIP/1000-081d91b0'
> ISDN1#02: CAPI INFO 0x3490: Normal call
2006 Feb 11
4
Problem with Wait() and chan_capi-cm?
Hi!
I am playing around with Asterisk and have a problem :-)
(Asterisk-version: 1.2.4, chan_capi-cm-version: 0.6.4)
I have a sip-phone at my desk and an ISDN-phone (independent of the
Asterisk-server) in my living room, when I'm not at my desk, the
sip-phone is switched off. I would like to be able to accept calls at
both phones (when available) and have Voicemail kick in if I don't
2006 Jan 27
1
No IN and OUT on ISDN line at the same time?
Hi,
I like to forward an incoming call on an ISDN line to my mobile phone.
Since ISDN offers two channels, I thought that this should work, but Asterisk tells me, that there is no channel available.
There is no one else using this line, so guess I made a mistake in the configuration or it might not work for another reason.
Here's the CLI output , the capi.conf and extensions.conf. 83086921 is
2006 Dec 13
1
Diva Server V-BRI-2 and internal numbers
Hi,
I have an asterisk with a DIVA Server V-BRI-2 card, connected to a Siemens
PABX. From a SIP phone, I can call other internal SIP phones, external
numbers (to PSTN), but I can't call internal phones connected to the
internal phone network.
When I call 107, which is an internal phone, heres the logs from asterisk:
-- Executing Dial("SIP/Greg-081f5a10",
2006 Apr 01
2
chan-capi: Sending digits on a bri (isdn) d-channel
Dear asterisk users!
I want to control a hardware pbx with asterisk. What I need to do
this is being able to press "hold" which can be done with
capicommand(hold) and then send digits on a bri card which
connects to my asterisk computer. So far I use
Dial(CAPI/ISDN1/27:<<digits>>/bo,15) to do this. Are there better
ways? Note that these are not dtmf, I'm afraid.
I use
2007 Dec 10
0
CAPI didn't get a frame | avoiding initial deadlock | multiple instances of Asterisk
Hi guys,
First of all, I know that this server must be upgraded asap, I'm just
wondering if anyone of you has already faced this problem and , if so, would
the upgrade solve my problems...
CAPI version 0.6
Asterisk 1.2.5
AGI scripts are being used
Main problems:
-Dropped Calls
- ps aux | grep asterisk shows that asterisk (that is started with
safe_asterisk) is generating multiple
2010 Mar 09
0
Asterisk 1.6.2.5 crash with chan_capi upon calling to PSTN
Hi,
I am having a problem with (Asterisk is crashing) with a Fritz card PCI
/ chan_capi.
Receiving Calls from PSTN works, but outbound calls make asterisk crash
(Speicherzugriffsfehler/Segmentation fault). The crash occurs upon
dialing with the other phone not even ringing.
I hereby ask if somebody reading this list can confirm or disprove my
issue. Does anbody run a recent asterisk 2.6 with
2007 Mar 18
1
Choppy sound with chan_capi + Fritz Card USB
Hi everybody,
I have a problem which I cannot eliminate on my own. Has anybody any idea
for the following:
I am using the asterisk-version from Debian-Testing (1.2.13) with the
latest chan_capi (also tried an older version).
When using the Capi-Channel, everything works fine except from the sound
it sounds extremely choppy and is unusable :-(
When e.g. capisuite is used for fax, everything
2007 Jul 26
2
ISDN: Problems starting off
Hi,
the first thing I did with Asterisk is listening to
`demo-congrats' by Xlite on the same machine. This works
perfectly. The config files are those shipped with the
package.
Now I want to listen to it over ISDN/Capi but I don't
succeed.
My `capi.conf' is like show in many tutorial on the web. In
`extensions.conf' I just added the following lines:
[capi-in]
exten =>
2007 Jul 27
1
ISDN: Problems starting off [another attempt]
[Something seems to have went wrong with my previous
posting. It appears on the archive page in another thread. I
did not receive anything myself. So I may give it another
try:]
Hi,
the first thing I did with Asterisk is listening to
`demo-congrats' by Xlite on the same machine. This works
perfectly. The config files are those shipped with the
package.
Now I want to listen to it over
2006 Jun 04
5
chan_capi-cm-0.6 and incoming calls problem
I have a problem receving calls via the ISDN line, using the followin
components
Asterisk 1.0.9 with asterisk@home
chan_capi-cm-0.6
AVM Fritz card
datalink protocol = point to multimode
I can make calls out with no problems so the issue is only incoming calls.
When I make the call from an external line to the ISDN line connected to
asterisk, I get a busy signal after about 5 seconds. I have
2006 Feb 19
2
chan_capi setting ${DNIS}
Is there a reason the variable ${DNIS} does not get set with incoming
calls via chan_capi ?
Is it related to the MSN=X in capi.conf ?
version = chan_capi-cm-0.6.3
example;
exten => _95555555XX,1,NoOp, ${EXTEN}, ${DNIS}
== ISDN1: Incoming call '0400000000' -> '95555555'
-- Executing SetCDRUserField("CAPI/ISDN1/955555 55-135", "Incoming")
in new
2006 Feb 23
2
chan_capi-cm-0.6.4
Hello Armin, hello List
I'm trying to get chan_capi working with asterisk from debian stable
(asterisk 1.0.7, the debian version number is 1:1.0.7.dfsg.1-2).
I managed to get it compiled by providing my own version of
ast_copy_string.
This is an Austrian PTP line. I can do outgoing calls fine (no
comprehensive tests yet). For incoming calls, I'm getting "No answer"
on the
2011 Jun 29
1
dialplan execution stops after ReceiveFax
Hello,
I have a noticed strange behavior in Asterisk 1.6.18.2 with ReceiveFax
Digium FAX Driver: 1.6.2.0_1.3.0 (optimized for i686_32).
I use a context [capi-in] for icoming ISDN calls:
======
[capi-in]
; Faxe fuer Ruben
exten => 12345,1,Macro(faxin,ruben.roegels at jumping-frog.org,${EXTEN})
======
My macro for the fax receiving looks like that:
======
[macro-faxin]
; Faxe
; ARG1 =
2006 Jan 23
1
chan_capi - B3 Error
I seem to be having a problem with B3 on my ISDN line, as you can see
from the dial string I am having to have asterisk generate ringing
else there is no progress indication.
-- Executing Dial("SIP/0014A8ACCB83-fd9f", "CAPI/g1/142392203000/
b|40|r") in new stack
-- Called g1/142392203000/b
-- CAPI/ISDN1/142392203000-0 is proceeding passing it to SIP/
2006 Feb 23
1
chan_capi-cm 0.6.4 random outgoing MSN problem
I've having a big problem after having upgraded to 1.2.4 and
chan_capi-cm 0.6.4
When making outgoing calls I don't seem to have any control over the CLI
that is presented to the called party -- it can be any one of the MSNs
allocated to the line, allocated on what seems to be a random basis.
This is on a BT Business Highway line (which is essentially an ISDN2e
line with two built-in
2006 Mar 21
0
Queue and busy/congested ZAP channels
Hi,
I'm having a problem with the queue behaviour in my place:
I have two ISDN channels to the outside (Zap/1) and two channels two a
Siemens Gigaset (Zap/4). I also use a SIP gateway to call outside and
have a couple of IP phones around as well (SIP).
The Gigaset has about 5 phones connected to it (+base station). Whenever
two people are using those, I always am blocking two internal
2007 Jul 30
2
Strange ISDN Troubles
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Ahoy
I'm trying to setup Asterisk on debian etch (with the debian packages)
with a "Fritz!Card PCI" ISDN card and chan_capi.
Everything seems to be configured the right way (excerpts below),
Asterisk seems to see the ISDN-card but if i try to place a test-call
from the outside i don't see anything on the asterisk-console (set debug
2004 Dec 09
1
chan_capi question
Hi all,
I've finally taken the plunge and had isdn installed.
It's a BRI from Telewest in the UK.
I'm told by the provider that it's in point to multipoint mode with 6 digit
presentation.
I'm using an AVM fritz (bt speedway) with the fcpci-suse9.1-3.11-02 driver.
Chan_capi seems to be installed fine.
I can receive incoming calls. However, I can't call out.
When ever i