similar to: No subject

Hello everyone, I'm using very simple setup to make and receive external ISDN calls through a softphone (x-lite version 3.0 - Win32) via an asterisk box. Hardware setup: - Dialogic Diva BRI (lspci yields: Network controller: Eicon Technology Corporation DIVA Server BRI-2M/-2F (rev 01)) - ISDN BRI line Software setup: - Redhat 9 - asterisk-1.4.16.2 - chan_capi-1.0.2 Asterisk configuration

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Ahoy I'm trying to setup Asterisk on debian etch (with the debian packages) with a "Fritz!Card PCI" ISDN card and chan_capi. Everything seems to be configured the right way (excerpts below), Asterisk seems to see the ISDN-card but if i try to place a test-call from the outside i don't see anything on the asterisk-console (set debug

Hi everybody, I have a problem which I cannot eliminate on my own. Has anybody any idea for the following: I am using the asterisk-version from Debian-Testing (1.2.13) with the latest chan_capi (also tried an older version). When using the Capi-Channel, everything works fine except from the sound it sounds extremely choppy and is unusable :-( When e.g. capisuite is used for fax, everything

Hi, the first thing I did with Asterisk is listening to `demo-congrats' by Xlite on the same machine. This works perfectly. The config files are those shipped with the package. Now I want to listen to it over ISDN/Capi but I don't succeed. My `capi.conf' is like show in many tutorial on the web. In `extensions.conf' I just added the following lines: [capi-in] exten =>

[Something seems to have went wrong with my previous posting. It appears on the archive page in another thread. I did not receive anything myself. So I may give it another try:] Hi, the first thing I did with Asterisk is listening to `demo-congrats' by Xlite on the same machine. This works perfectly. The config files are those shipped with the package. Now I want to listen to it over

Hello, I'm trying to use the version 0.6 of chan_capi-cm for outgoing calls it works perfectly but for incoming calls it doesn't work. I tried to set an extension to dial my from-pstn context and it works. So I think there's a problem with my capi.conf or something... Here's a debug when calling -- CONNECT_IND (PLCI=0x101,DID=9100,CID=46720XXXX,CIP=0x4,CONTROLLER=0x1)

I have a problem receving calls via the ISDN line, using the followin components Asterisk 1.0.9 with asterisk@home chan_capi-cm-0.6 AVM Fritz card datalink protocol = point to multimode I can make calls out with no problems so the issue is only incoming calls. When I make the call from an external line to the ISDN line connected to asterisk, I get a busy signal after about 5 seconds. I have

Hello Armin, hello List I'm trying to get chan_capi working with asterisk from debian stable (asterisk 1.0.7, the debian version number is 1:1.0.7.dfsg.1-2). I managed to get it compiled by providing my own version of ast_copy_string. This is an Austrian PTP line. I can do outgoing calls fine (no comprehensive tests yet). For incoming calls, I'm getting "No answer" on the

Hello, I have a noticed strange behavior in Asterisk 1.6.18.2 with ReceiveFax Digium FAX Driver: 1.6.2.0_1.3.0 (optimized for i686_32). I use a context [capi-in] for icoming ISDN calls: ====== [capi-in] ; Faxe fuer Ruben exten => 12345,1,Macro(faxin,ruben.roegels at jumping-frog.org,${EXTEN}) ====== My macro for the fax receiving looks like that: ====== [macro-faxin] ; Faxe ; ARG1 =

Hi, I tried to use the version 0.6 of chan_capi-cm for outgoing calls it works perfectly but for incoming calls it will not work: --- snip --- *CLI> capi debug CAPI Debugging Enabled -- CONNECT_IND (PLCI=0x101,DID=97,CID=0179903xxxx,CIP=0x1,CONTROLLER=0x1) == reventix: Incoming call '0179903xxxx' -> '97' -- reventix: info element CALLED PARTY NUMBER --

Hi, after I fixed my problem with the playback() application, I now have the next strange one. When I dial the number of our client, located in another town, I get a connection to the asterisk server, I can talk to my client or listen to his mailbox. If some in the town of this client calls him, he gets the ISDN error "service not available". Out office is connected to he office

Hi, I am having a problem with (Asterisk is crashing) with a Fritz card PCI / chan_capi. Receiving Calls from PSTN works, but outbound calls make asterisk crash (Speicherzugriffsfehler/Segmentation fault). The crash occurs upon dialing with the other phone not even ringing. I hereby ask if somebody reading this list can confirm or disprove my issue. Does anbody run a recent asterisk 2.6 with

Dear asterisk users! I want to control a hardware pbx with asterisk. What I need to do this is being able to press "hold" which can be done with capicommand(hold) and then send digits on a bri card which connects to my asterisk computer. So far I use Dial(CAPI/ISDN1/27:<<digits>>/bo,15) to do this. Are there better ways? Note that these are not dtmf, I'm afraid. I use

Good day, The unusual thing about this problem is that it doesn't occur just during a CAPI call, or just during an IAX/SIP call. Only during IAX/CAPI I'm having some trouble with the CAPI interface and it only occurs when a call comes in on an IAX channel and goes out the CAPI interface. The capi debug in the asterisk console is below as well as the relevent parts of .conf files from

I have a Diva Server BRI installed in a Debian system running Asterisk 1.2.22. When a call comes in the Background application plays a couple of times. Halfway through the second time, the call is disconnected (total time connected about 25 seconds). I've posted various configs below. Any advice on how to debug would be appreciated. We are located in New Zealand. CLI showing capi debug (just

Hi, I?ve strange problem when I?m making a call from SIP (Cisco 7960) to capi (Fritz PCI). When I call a national number, I?m hearing the ringtone when the called party is ringing but when I call an international number, I don?t hear the ringtone and I?ve a silence until the called party answers. Both call are going through the same extension. Here?s 2 log files, one with a national number and

Hi, I've a Fritz card which was working fine, recently I changed hardware and my nightmare started. Now when I call someone through the chan_capi (0.3.5 or 0.4.0) it works fine but when I receive calls I always get hungup. Can someone please give some help? Here are the logs: *CLI> -- CONNECT_IND ID=001 #0x0000 LEN=0049 Controller/PLCI/NCCI = 0x101 CIPValue

Hi all ! We have 3 NTBAs which are all going to our existing PBX. Our areacode is 06003 and our DDI enabled number 9141. I want to exchange that PBX with Asterisk, but still struggle to get it working. My CAPI.CONF is currently like this: [general] nationalprefix=0 internationalprefix=00 rxgain=0.800000 txgain=0.800000 [interfaces] context=in-capi msn=60039141 incomingmsn=* controller=1

Hi, I'm using * with SIP in our LAN and CAPI for external phone calls. Everything works fine (SIP to SIP calls are ok and external incomming calls are ok too (CAPI to SIP)) exept the CAPI to SIP communication. When I try to make an external call from a SIP client, the (ext) phone rings (while the SIP client display "trying...") but when I hangup I don't get any communication and

I seem to be having a problem with B3 on my ISDN line, as you can see from the dial string I am having to have asterisk generate ringing else there is no progress indication. -- Executing Dial("SIP/0014A8ACCB83-fd9f", "CAPI/g1/142392203000/ b|40|r") in new stack -- Called g1/142392203000/b -- CAPI/ISDN1/142392203000-0 is proceeding passing it to SIP/