similar to: G729 copy protection

Hi I seem to have installed the G729 codec properly but can't seem to get it to work .. in the Asterisk startup I see .. [codec_g729b.so] => (Annex B (floating point) G.729/PCM16 Codec Translator) == Detected 1 licensed G.729 transcoders WARNING[1074408160]: File translate.c, Line 218 (calc_cost): Translator 'g729tolinb' does not produce sample frames. == Registered translator

Hi All, Does anyone know what the current status is of the G729 codec on Solaris? According to the following link: http://www.asteriskvoipnews.com/asterisk_releases/_digium_g729_codec_now_available_forsolarissparc.html there is a version available for SPARC processor's. However, I have just had a quick look around Digium's FTP server and cannot seem to find these codecs (supported or

Greetings, The software G.729 codec module from Digium has been updated for all platforms. There are x86_32 and x86_64 versions optimized for specific processors available for both Asterisk 1.6 and 1.4 for the following platforms. * Linux * Solaris 10 * FreeBSD 7.0 * FreeBSD 6.1 Changes: * For Asterisk trunk / 1.6, builds have been updated for CLI API changes. * All non-Linux

Greetings, The software G.729 codec module from Digium has been updated for all platforms. There are x86_32 and x86_64 versions optimized for specific processors available for both Asterisk 1.6 and 1.4 for the following platforms. * Linux * Solaris 10 * FreeBSD 7.0 * FreeBSD 6.1 Changes: * For Asterisk trunk / 1.6, builds have been updated for CLI API changes. * All non-Linux

All, I have around 10 opteron 165 servers all running Fedora Core 5 and Asterisk 1.2.x (mostly Asterisk 1.2.16) with 15-25 channels of g729 each. They register without any problem but I had to use the codec_g729.so corresponding to the i386 version in all of them (asterisk would not start if i tried the opteron specific one). The problem: In one of the servers, we seem to lose the registration

Hi Sir, We have integrated Skype with Asterisk (skype user id:- rexesbposolutions). Each call which is coming to skype account is getting transfered to Asterisk Queue. It has following two cases: case 1: When we call from normal skype account to skype account (rexesbposolutions), everything is working fine. case 2: This skype account (rexesbposolutions) has been assigned with a online virtual

pbx18*CLI> module load codec_g729-ast14-gcc4-glibc-pentium3.so Unable to load module codec_g729-ast14-gcc4-glibc-pentium3.so Command 'module load codec_g729-ast14-gcc4-glibc-pentium3.so ' failed. [Dec 22 15:52:45] WARNING[4491]: loader.c:757 inspect_module: Module 'codec_g729-ast14-gcc4-glibc-pentium3.so' does not provide a license key. [Dec 22 15:52:45] WARNING[4491]:

Ok, I built a test system to duplicate my problem and provide myself a platform that I can mess around with to try and break any features. My problem is G729 pass-through from a gateway to a phone. I think I even have transcoding working, which makes me more confused on what's wrong with my pass-through. It must be a configuration issue. The basics... *CLI> core show version Asterisk

I am trying to create a %100 g729 (with no transcoding) system (using a Soekris, of course). I am running AstLinux with the native sounds, g729 is the only codec allowed, %100 SIP (g729 only allow=) - I think I am covering all of my bases. I have only "format=g729" in voicemail.conf. On an incoming call to a mailbox, everything goes well until recording the message. When the

List, Anybody have success with Digium's G729 codec and asterisk 1.6.0? Reading http://www.russellbryant.net/blog/index.php/2008/03/05/codec_g729-v34-builds-now-available/ is seems they are build for 1.6 and trunk. But all I could find / use is 1.4 builds from http://downloads.digium.com/pub/telephony/codec_g729/ Thoughts? PB

Does anyone have any opinions on the music on hold quality over G729? The stock files seem to sound terrible over it, this is enhanced further by calls coming from the PSTN via a Zaptel gateway. I am only using the stock wav files and have not attempted to use much else so far. I've ruled out timing issues on the system generating the MOH itself (ztdummy on the PBX itself, our Zaptel gateway

Hello, I have that problem with codec G729. Please can somebody help me! WARNING[16384]: File codec_g729b.c, Line 413 (load_module): Unable to initialize va stuff: -1 == Detected 4 licensed G.729 transcoders WARNING[16384]: File translate.c, Line 219 (calc_cost): Translator 'g729tolinb' does not produce sample frames. == Registered translator 'g729tolinb' from format G729A to

Hi, ALL: I install IPP(l_ipp_ia32_itanium_p_4_1_2.tar) and download the speech codeing (l_ipp-sample-speech-coding_p_4.1.008.tgz) then patch it (g729-041103.diff). My CPU is Centaur VIA Nehemiah with 998.715 MHz processor not INTEL CPU. I choose PIII as its CPU type when I modify Makefile under "G729-float". # For PIII OPTIMIZE= -O6 -mcpu=pentium3 -march=pentium3 -ffast-math

Hi guys, I got 2 licenses of g.729 and while running the asterisk with Monitor (for recording a channel) and using one channel for the call... I receive this error: WARNING[23826]: codec_g729.c:180 g729tolin_framein: Out of G.729 Decoder Licenses! many times.... it starts only when the call through the Zap channel takes place. while this error is being running on my screen I ran the cli command:

I am having some problems with g729 with SIP and ZAP channels. 1) I have two g729 licences. Very frequetnly (I don?t know what triggers the error) I get the following warnings and error when I try to place a call via SIP to my X100P. The only way to get out of this is through a restart of *. When the error ocurrs there are no other calls in place. Any ideas? Error Opening channel:2 not

Hi there, im having some problems with my asterisk box, it seems codec is the principal cause of it. Reading in some forums i found that i can get the new codec_g729 from ftp://ftp.digium.com/pub/telephony/asterisk/g729/new_codec_binary/codec_g729b.so i checked it but the directory new_codec_binary doesnt exist. Anybody knows where can i found it?? Thanks for your help. Carlos Andres Medina

I have Now a G729 codec license and when i start it comes: [format_g729.so] => (Raw G729 data) == Registered file format g729, extension(s) g729 [app_datetime.so] => (Date and Time) == Registered application 'DateTime' [codec_g729b.so] => (Annex B (floating point) G.729/PCM16 Codec Translator) sh: line 1: tmp: Is a directory rm: cannot remove `tmp': Is a directory

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good Morning, Any help would be grateful to help me understanding what's wrong... I have bought 2 g729a licenses to digium and I would like to have them works... My processor is an Intel(R) Xeon(R) CPU E5310 @ 1.60GHz (4 processors) so I have downloaded the

Hi all, i'm trouble with codec setup on an asterisk machine 1.4.18 and some Thomson ST2030 as extensions. In the users.conf file for internal extension i have: disallow=all allow=g729 allow=alaw allow=ulaw Without any codec installed (i mean with original g729 of asterisk) all go fine, calling from an extension to one other: Peer User/ANR Call ID Seq (Tx/Rx) Format

Hi users, I have Asterisk 1.6.2.20 in Ubuntu 10.04. I am trying to convert a gsm file to G729 using file convert, but I am facing error as follows, file convert /tmp/welcome.gsm /tmp/welcome.g729 Failed to convert /tmp/welcome.gsm to /tmp/welcome.g729! Command 'file convert /tmp/welcome.gsm /tmp/welcome.g729' failed. [Dec 20 17:24:18] WARNING[2221]: translate.c:256