similar to: asterisk web interface

hi there :) i get this error in the asterisk CLI: Sep 21 20:31:49 ERROR[3774]: cdr_addon_mysql.c:159 mysql_log: cdr_mysql: Unknown connection error: (2006) MySQL server has gone away when I run 'cdr mysql status' i get: Connected to voiceone at localhost, port 3306 using table cdr for 18 minutes, 24 seconds. Wrote 8 records since last restart and 1 records since last reconnect. I

________________________________ From: Jody Gugelhupf <knueffle at yahoo.com> To: "asterisk-users at lists.digium.com" <asterisk-users at lists.digium.com> Sent: Thursday, November 29, 2012 10:23:01 PM Subject: audio trouble with asterisk, help very much appreciated Hi there :) first about my setup, running centos 6.2, asterisk 1.8.13.0, freepbx 2.9.0.12.? I have a

hi there, i run asterisk 1.4 on my debian machine, which is in my internal 10.x.x.x network, behind my main computer, i cam make call, receive calls, all works fine, with all providers except sipgate.de, there i can receive call and make them, i can hear the other end but they can not hear me, this is only the case with sipgate.de i don#t know how to configure it and thought maybe someone can help

hi ppl, i'm using asterisk 1.2 because i'm making use of voiceone, but before i was using asterisk 1.4 and had the same problem, it concerns an italian voip/sip provider called eutelia/skypho, my problem is the following one: when i start my pbx my skypho account is working fine, meaning that e.g. incoming calls are shown in the asterisk CLI and caller and callee can hear each other when

Hello, all. I would like to use ntpd for time sync not rdate or ntpdate. but after installation the ntpd, I found that listened at all interfaces like below. udp 0 0 192.168.111.2:123 0.0.0.0:* 11528/ntpd udp 0 0 xxx.xxx.62.20:123 0.0.0.0:* 11528/ntpd udp 0 0

Hi, I have an issue with pattern matching. I have the following SelectionDAG: t13: i32 = extract_vector_elt t2, Constant:i64<1> That I am trying to match with the following pattern: def : Pat<(extractelt (v4i16 SingleReg:$v), 1), (SRADd1 SingleReg :$v, (i64 16))>; But for some reason the pattern does not match. It seems to be due to the fact extract_vector_elt's result

Hi, i have got a linux debian woody box with icecast2 and ices2 on it. I'm running a 24/7 stream with a huge playlist on my server, but I've got some questions about it: 1. Is it possible, that ices updates Metadata (Artist - Track) to the icecast Server in playlist mode? 2. Is there any possibility of controlling ices2 by a webinterface with functions like nextrack, stop and play,

hello, i'm starting/stopping icecast (1.3.11) & ices (0.2.2) from a web interface. fine so far, but now i see strange things: both ices & icecast, once started , (ices -B ... , icecast -b ...), both processes and their childs are listening also to port 80, besides their normal operation. i've found out because apache didn't restart (Address already in use: make_sock: could

Hello , i am trying to install a virtual machine and i get this error in tasks in the ovirt webinterface. Error creating virtual machine: Error: Error creating new domain (virDomainCreate). Subsystem qemu: internal error Failed to add tap interface 'vnet%d' to bridge 'breth0' : No such device in DomainWrap.cpp:ManagementMethod:115 On the node startup i only see breth1 geting

hi, --> i have 8cores cpu. but my xenserver is using only one cpu, how to make use of all cpu cores --> machine is having 16G ram but domain0 is having very less memory. is there any way to increase memory for domain0 [root@xenserver-DZONGRI ~]# cat /proc/meminfo MemTotal: 574464 kB MemFree: 111776 kB Buffers: 9500 kB Cached: 117320 kB SwapCached: 100

Hello, I'm new here, and I'm from Germany, so please be patient with me because my English is not so good ;) I am searching for a Step-to-Step Guide to first-configure Dovecot. I want to create virtual Users wich can logon to my Server to a Webinterface to call theire mails. I think IMAP is the right protokoll but it should be safe, so i think IMAPs is better. Unfortunately I am not

G'Day All, Can someone help me out please. My new CISCO 7960's manual says I have to setup a TFTP server. Googled it and got a little understanding, but from * standpoint, well I am still a lost. Can I set this tftp server on the same * box? Can in be on a WinXP box? Which tftp software would you recommend? Thanks much. BTY: Does anyone have a How-To on getting the 7960 fully configured

Hello ! I use Slackware Linux on a box for routing and SNAT for a small network: |eth0: 80.97.108.1| | | |eth1: 192.168.1.1| ..........| my network (192.168.1.0/24)| I search for a tool show-me on real time the trafic made by all/one IPon the interface eth1, somethings simple ; EX: 192.168.1.10 ........... x kbit/s 192.168.1.11 ........... y kbit/s 192.168.1.12

> <!-- Admin logs in with the username given below --> > <admin-user>admin</admin-user> > <admin-password>hackme</admin-password> > </authentication> Doh, I forgot to update my config file when I updated from buggy debian packages to CVS compiled source. >Nope. This is one of them vertual things. I know you can do

Hi list, I?m searching a webmail imap client including a calendar and a todo list (last is not necessary) for 2 or 3 users. I have tried zimbra but it?s too oversized for my claim. Do someone have a hint? Thanks. Kamill

Hi Guys We have a strange a strange issue at a client they have 3 panels on their phone and every so often the panels reboot themselves yet the phone stays on. We decided to replace the T26 for a T28 to see if it fixes the issue and still have the exact same issue. Has anyone seen this before? -------------- next part -------------- An HTML attachment was scrubbed... URL:

I was used (in SambaNT/OpenLDAP) to put on CUPS configuration the statement (/etc/cups/cups-files.conf): SystemGroup printops and add to 'printops' group some users that can manage cups. Now i'm in AD mode. I'm in 'printops' group: root at vdmpp1:~# id gaio uid=10000(gaio) gid=10513(domain users) gruppi=10513(domain

Hello, I try to get per-mailbox-ACLs on dovecot. So, I've modded dovecot.conf: protocol imap { mail_plugins = acl } and plugin { acl = vfile } When I telnet to dovecot an try the command "capability" there is nothing about acl. I need acl for "open-xchange" so I can share Mailboxes over the webinterface. Do I have to create the acl-file manually or does dovecot

Hi. If I open http://audio-mp3.ibiblio.org:8000/wncw-128k, or any other URL on my TuneIn app in iOS, I have the ability to record those streams for later listening. However, if I relay any of those streams via Icecast 2.42 on Windows 8.1, I can't record in TuneIn Pro. Is there a known cause or work-around for this? Thanks!

Hai guys,   I wanted to share the following site, not my site, but in my opinion, a very good setup for a windows image/deploy server. And im Dutch so its free ;-) ... :-))   See :  https://deployhappiness.com/ and https://fogproject.org/  i've just finished a deploy setup with fogserver and the info from deployhappiness.com   Some of direct links i used: