similar to: Selling a Digium TDM400P w/ 4 FXO cards

Evening all. I'm looking at building an Asterisk system for one of the projects of the Charity where I'm the SysAdmin. The project has two analogue phone lines - BT Featureline Compact, we're in the UK - that I'd like Asterisk to handle. My current quandary is which FXO interface to use. I've been looking at the Digium TDM400P and Sangoma A200, which are similar prices for

Not to sound like a broken record but...... Is there any word on the availability of the FXO cards for the TDM400P? I have an application that would benefit. If it has been dropped please let me know. Thanks Gene Kochanowsky

We are experiencing problems with FXO modules on TDM400P. From time to time they stop responding to incoming rings although they work fine if we use them to dial out. It's been verified at least in two different installations (using different mainboards) in two different locations. The only solution to the problem is to stop asterisk, then unload and reload kernel drivers. The problem appears

Thanks for the suggestion. I have busydetect=yes in zapata.conf. You refer to "Martin's algorithm". Can you provide more details please? ----- Original Message ----- From: "Soner Tari" <list@kulustur.org> Subject: Re: [Asterisk-Users] FXO module in TDM400P (UK, BT) - Hangup detection failing To: "Asterisk Users Mailing List - Non-Commercial Discussion"

<div><BR>Hello,</div> <div>&nbsp;I bought a TDM400P, and intended to use it with my analog phone, which is RJ11 ofcourse. So, the question now, how do I plug in my RJ11 phone to the TDM400P card, which has an RJ45 interface? Also, since it's an 11B card, I also intend to bring in an analog line into the RJ45, so i am still left with the same question....how do I go

Hi , I have an asterix (1.2.7.1) box with 3 TDM400P and 10 FXO modules, and zaptel (1.2.5). The problem is that 6 modules can't be initaized and i get the folowing error: May 7 09:17:37 WARNING[7739] chan_zap.c: Unable to specify channel 9: No such device May 7 09:17:37 ERROR[7739] chan_zap.c: Unable to open channel 9: No such device here = 0, tmp->channel = 9, channel = 9 ztcfg output

Hi all, A while back, there was a short thread on using the FXS interface from a Primus TalkBroadBand device (a DLink ATA) as a incoming line for the FXO interface on the TDM400P: Primus <--> DLink ATA FXS <--> TDM400P FXO <--> Asterisk In that thread, a couple of people suggested that this does not work reliabley, and the ATA FXS <--> TDM FXO link 'goes

Hi Guys, I recently got a TDM400P 4 FXO for use in the UK, this at the time seemed like a good idea as I had good results with an X100P clone. Installation went great and call clarity is excellent no echo like I had on the clone card. My problems start with detecting hanging up the line. If a person calls into the system and speaks to me on a SIP phone when I hang up the call clears

I've setup * with TDM400P w/1 FXS, 3 FXO modules. I've one analog phone connected to TDM400P FXS module, 1 PSTN line to one of the FXO module(ZAP) , and 2 analog phones connected to Sipura 2000 (SIP). The calls between SIPs and zap phone (fxs) are OK. But 2 issues cannot be solved: 1. To dial to PSTN via zap phone, the setup in extensions.conf with the following exten =>

I have been looking for the answer to this question for a while. Google-ing and reading the archives of Asterisk-Users has not enlightened me. It seems that this question has been asked many times, and many times it has gone unanswered. I have call waiting and three way calling on my PSTN line from Verizon (the local telco). This is connected to a FXO port on a TDM400P. I also have

I had a similar issue with sending a flash to the PSTN for call waiting. I found that my dial plan in the extensions.conf file was not allowing me to dial *xx. Once I corrected my dial plan I was able to dial *0, *69, *78, *79, etc. Training the wife on how to actually use it was an entirely different issue. I have not tried to enable 3-way calling via the PSTN. "Jeff Otterson"

>Asterisk and it works fine untill the following >situation: > >- one of the telco lines occasionally becomes mute after call is completed, would not provide dial tone, (not sure about ringing on that >line) - both via old and new PBX. >- zap show channel <n> would show that line as 'Offhook', though no telephone is off hook. > >If physical line would be

I have been having some troubles with the zaptel channel on what appears to be the inbound process. The box is running the stable CVS code and has a TDM400P 4-port FXO card in it for analog connectivity. Channel 1 is the only active port on the card at the moment as we only have one analog line. What has been happening is that it looks like Asterisk has been detecting an inbound call even though

Since the irc channel wasn't any help, I will try posting my problem here. I have two TDM400Ps less than a week old in a PC. All of the FXS ports work fine, and all of the FXO ports worked fine up until thisafternoon. If I try to dial in, I get a busy signal, if I try to dial out, all I hear is a very scratchy, very crackly dialtone. If I swap the first FXO module with the second on the card,

hi, all I have configure tdm400p analog fxo card. that's ok. but how to chek that is working properly or not. i chek with ztcfg -vvvv and zttool . that's ok. i want to dial from my fxo port to another extesion. zaptel.conf ------------------ fxsls=1,2,3,4 defaultzone=in loadzone=in zapata.conf ---------------- context=mycontext signalling=fxl_ls group=1 channel=1-4 thanks' in

Hello - I've been running Asterisk (quite happily!) for several years now using a Digium TDM400P card in an old Linux box (P4 1.6 w/ 256MB RAM). I'm also running another old PC running m0n0wall as a firewall. Between these two boxes, that run 24x7, I'm drawing a lot more power than needed and hoping to make a dent in my monthly electric bill by consolidating the two into a single box

Does anyone have trouble with dialing in to an Asterisk Server and having the DTMF digits recognized? We have some clients who are calling in with cell phones, notably those with SprintPCS service, who's DTMF is just never recognized. I have tried relax_dtmf on and off, with no improvement. My rxgain is currently set to 3. Can anyone suggest possible solutions? Incoming calls are

Hi all I installed a tdm400p into a old p2 machine. I'm not able to see it under /proc/interupts or using lspci.. we removed all other cards. changed slots, forced irq to that slot.. etc etc. what is the min specs needed to get one of these cards running? thanks L --------------------------------- Do you Yahoo!? Yahoo! Search presents - Jib Jab's 'Second Term'

Dear all. I have a tdm400p with an FXO module in slot 4 and an FXS module in slot 1. I have not configured the FXS port in an attempt to keep things simple. The problem is that when I call the POTS number (assigned by phone company) asterisk is seeing the call but then not doing anything with it. The verbose output from asterisk is as follows:

Hy, I would want to "test" the FXO and FXS channels of a TDM400p with the asterisk. For example, when I want to Know if a sip peers is correctly register, I use ChanisAvail, but if a module FXS hasn't a phone connected, How could I Know it?. Note, that I don't want to Know if the channel ZAP is correctly configurated. This information is given for Chanisavail. Thanks for