similar to: Asterisk and Hardware Requirements

Hi everyone. I'm wondering whether a setup like the one described below would be possible with Tinc: nodeA1 nodeB3 | | (Network A) --- [GWA] --- (Internet) --- [GWB] --- (Network B) | | nodeA2

Hi, I have a client connected to the ''net through 3 ISP''s. Have set up a Linux box to do routing and load sharing for the 3 connections. A fourth interface is connected to the LAN with private IP addresses. Am using iptables to SNAT traffic to the appropriate IP depending on the interface the packet gets routed onto. The setup looks something like this: Interface IP

I would really appreciate some help with changing a link_to_remote call to a button of some sort. Here''s a little background. On the page there are two <div>s. One is a form that lets the visitor enter items. The second <div> is where the entered items get displayed, each in it''s own item <div>. Each item <div> has two <span>s. The first one

Hi Who concern, I setup TINC VPN follow these. 192.168.1.x / 24 (Client groups) | 192.168.1.1 (eth1) (GW1) 202.44.34.206 (eth0) || Internet || 202.44.45.14 (eth0) (GW2) 192.168.2.1 (eth1)

Hi, i have a following problem. Looks like this ROUTER --------------DEF.GWa aaa.aaa.aaa.aaa | DEF.GWb bbb.bbb.bbb.bbb | ---------------- -------------------

Hello, I have an unusual problem and I've only found a small amount of material after searching for other posts on this topic. We have a production server running Samba version 2.2.7a which I'm told has been working perfectly for many years. Every day over the last week Samba stops authenticating users (via Active Directory) requesting access to shares. Specifically another

Hi all, I am using a redhat 8.x linux box configured with zebra routing software which is also configured with ospfd I have 2 backbone routers running ospf connected to different isp''s I have 3 local routers also running ospf within themselfs and also with the 2 backbone routers (all are linux boxes) router A - backbone router 1 router B - backbone router 2 router C - local router 1

I've had an spa3k in service here at the house for a while now. After some initial wrangling, it's been working okay. I've had to reboot it a couple times and have noticed something rather annoying though. My setup is pretty simple and, dare I say, common. I have the SPA-3000 "inline" between my incoming POTS line and the internal house phone. It's setup to deliver

I have installed Samba 2.0.4b on AIX 4.3.1 but cannot get it to authenticate Windows clients. The error that I get is 'The password is incorrect'. However when I use smbclient on the AIX box to connect to the shared resource it connects no problem. The only way that I can get a Windows client to connect is by putting the server into share mode and setting the share as guest allowable.

I need some help with a genome-wide association scatterplot. A recently published example of such a plot is attached to this message. Typical variables include: Y: -logP-value (range from 0 to 8) X: chromosomal distance Z: chromosomes 1 through 22 and X (a factor with 23 levels) I used coplot(Y~X|CHR) and xyplot(Y~X|CHR), but I am not sure how to get the entire graph in a single panel (see

I will be out of the office starting October 9, 2003 and will not return until October 14, 2003. I am out of the office from 10/09/03, returning 10/14/03. You will receive only this notification of my absence prior to my return, at which time I will respond. Please contact Syed Abuthagir for GWA. Please contact my manager David Albright, for emergencies.

I will be out of the office starting June 28, 2003 and will not return until July 7, 2003. I am out of the office from 06/30/03, returning 07/07/03. You will receive only this notification of my absence prior to my return, at which time I will respond. Please contact my manager David Albright, for emergencies. On Deamand Project - Larry Sackette GWA Linux Servers

Behavioral science data is often collected from nested structures (students in schools, in districts, etc.). This can produce nonindependence among responses from individuals in the same groups. Consequently, researchers are advised to model the nested nature of the data to avoid biases in SE estimates. Failing to account for nonindependence can lead to SE estimates that are too large or too

Hello all: I am interested in computing what the multilevel modeling literature calls a multiple membership model. More specifically, I am working with a data set involving clients and providers. The clients are the lower-level units who are nested within providers (higher-level). However, this is not nesting in the usual sense, as clients can belong to multple providers, which I understand

Hello, I'm configured Sipura-3000 to forward IP calls to PSTN number on no answer (In User1 tab Cfwd No Ans Dest: 123456@gw0) IPPhone ---IP---> Sipura-3000 ---PSTN---> PSTN User Generally it works fine, but Sipura sends back SIP OK to IPPhone just prior to dialing to PSTN number. How to configure Sipura to detect that the remote side on PSTN picks up the phone and only then to

Hi, I have a v2000 compaq laptop. The realtek network and USB on this machine was not working. After adding to grub.conf "acpi=off apci=off noacpi noapic" the v2000 realtek started working and the USB worked fine... Fantastic! So I thought I would try those same options on my r4000 laptop. they had no effect.... This AMD turion 64 4000+ rating laptop is still running SLOWWW...

Ok im trying to play Counter Strike 1.6, but it crashes when i join a server. The Video is set to OpenGL and when i set it to "Software" it started working (but the quality was really shitty so i want OpenGL). I have this video card VGA compatible controller [0300]: ATI Technologies Inc RS480 [Radeon Xpress 200G Series] And when the game crashed i got this error: Code: Allocating

After a couple hours last night.... doing a "killall -SIGUSR1 cpuspeed" bumps up the /proc/cpuinfo information for cpu mhz to 2393 Mhz. I did notice a little increase after that. However, the machine is still sluggish. I did a "hdparm -c 1 /dev/hda" but really did not notice any difference. I tried to download fglrx64_6_8_0_8.16.20-1.x86_64.rpm from ati (also 8.20.8) and get

CRAN (and crantastic) updates this week New packages ------------ * allan (1.0) Alan Lee http://crantastic.org/packages/allan Automates Large Linear Analysis Model Fitting * andrews (1.0) Jaroslav Myslivec http://crantastic.org/packages/andrews Andrews curves for visualization of multidimensional data * anesrake (0.3) Josh Pasek http://crantastic.org/packages/anesrake This

On 5/2/07, r-help-request@stat.math.ethz.ch < r-help-request@stat.math.ethz.ch> wrote: > > Send R-help mailing list submissions to > r-help@stat.math.ethz.ch > > To subscribe or unsubscribe via the World Wide Web, visit > https://stat.ethz.ch/mailman/listinfo/r-help > or, via email, send a message with subject or body 'help' to >