similar to: Macro Goofiness

I am using the Find-me/Follow-me example below with screening: http://www.voip-info.org/wiki/view/Asterisk+tips+findme Here is my actual config: [macro-screen] exten => s,1,Wait(1) exten => s,n,Background(press-1-to-be-connected-to-the-caller) exten => s,n,Set(TIMEOUT(response=5)) exten => 1,1,NoOp(Caller accepted) exten => i,1,Set(MACRO_RESULT=CONTINUE) exten =>

Hi list, We're trying to set up a phone number that customers can call to get a hold of anyone of a group of sysadmins (and not their voice mails!). We found the findme example ([1]) that makes the callees press 1 to accept the call. It almost works, but it doesn't work correctly when one of the callees, the sysadmins, hangs up after accepting the call. We're using this

Ok so a while back I found an example for having a number dial multiple numbers and then whoever answers and confirms gets the call. (don't recall who the example was from, but thank you!) But Now today I've been playing with TTS and STT and came across the BackgroundDetect command. Now If I use this allow it works fine. But when I try and use it with this it never actually detects me

Hi List I have had a look at the various posts on this and seem to be more confused than ever - but then again that's not hard ;-) I am using Version 1.4.33.1 build from the Debian "lenny" distros I am trying to implement a simple screening [macro-screen] exten => s,1,Background(press1) exten => s,n,WaitExten(5) exten => 1,1,NoOp(accepted) ; Dont set a reply so dial

A call comes in and goes into the queue, the queue dials a sip channel using a macro. The macro plays a set of options to the callee and if the callee presses 3 it sets MACRO_RESULT=CONTINUE and the macro ends. For some reason the caller goes back into the queue rather than continueing on in the dial plan. Why is this, i could have sworn in 1.2 if i set MACRO_RESULT=CONTINUE that the

I am following the example at http://www.voip-info.org/wiki/view/Asterisk+tips+findme but I find that no matter what, the call is connected. Can anyone confirm that config is working for them? Any suggestions appreciated. I need to transfer calls to a list of cell phones, ring all of them, allow them to screen the call, connect the call to the first number that accepts the call, and allow

Hello list, I'm using the following macro when calling an external callphone/GSM number : [macro-press1] exten => s,1,NoOp() exten => s,n,Playback(/var/lib/asterisk/sounds/prompts/press1) exten => s,n,Read(INPUT,,1,1,1) exten => s,n,NoOp(input : ${INPUT}) exten => s,n,GoToIf($["${INPUT}"=="1"]?exit:hangup) exten => s,n(exit),NoOp(call accepted) exten

This is a followup to the posting earlier about Hunt Groups with Call Screening. I have implemented the following macro and for some reason the Macro does not exit and continue the context it was called from when the called party rejects the call - It always drops through to the NoOp at the end and connects the call. Below are two examples of the dial commands I am using to call the macro.

I'd like to set some variables inside the macro called from Dial(). As far as I can tell, though, if you just do a SetVar inside the macro, it's set in a different context and isn't available to the code that calls the macro. Am I missing something? What's the right way to return data from the macro call? (Other than the MACRO_RESULT feature.) I'm using the

I'm trying to wean my self using the Agent channel in Asterisk. The main reason I use it is for the callback acknowledgement , where the user presses # to finally acknowledge the call. I have implemented this in the Dialplan using the Macro in the docs. This works well as long as the user enters something. However if the user hangs up , then both sides of the bridge call are hung up as

Hi, everybody: As part of a paging macro I'm using SendDTMF to send digits to the called party. The section looks like this: exten => s,1,Wait(0.5) exten => s,n,SendDTMF(9531290) exten => s,n,Wait(1.0) exten => s,n,Set(MACRO_RESULT=CONTINUE) To test I direct the call to a live extension just to hear what's happening -- what actually happens is that only the 9 is sent, and

Hi all, So, it's been a while. I'm just ramping back up with Dovecot after a hiatus of a few years. I've been using it fine, complete with Sieve, for about a year, with little or no issues. I finally got around to setting up a second account, to start figuring out how I want to do some plus address filtering. In a nutshell, I want to put mail for foo+bar in foo's 'bar'

I am setting up an after-hours on-call system. Someone calls in and requests service, and while they listen to music on hold, we dial out to several people's cell phones and home phones. We don't know if they will be answered by the employee, or by voicemail or a spouse/relative/child/pet. So we play a message that says "press 1 to accept the call" and ask employees to train

Greetings all, I've been working on having Asterisk put a call through to two different numbers, and give the call to the first one that acknowledges by pressing the 1 key. I found an example on the wiki, but I can't get it working. When I answer the call I hear the message telling me to press 1 to connect, and as soon as the message is done, the call is connected. In other words, it

I am running 1.4.10.1. I have a macro that is called from default for a certain extension (both below). I added NoCDR to s to try and stop extra CDR records, but I am still getting them. Any idea how to stop them? extensions.conf: [macro-STDEXT] exten =s,1,NoCDR() exten =s,2,Dial(${ARG1},30,Tt) exten =s,3,Goto(s-${DIALSTATUS},1) exten =s-NOANSWER,1,Voicemail(${ARG2}|u) exten

I''m trying to create a ssh class where the /etc/ssh/ssh_known_hosts and /etc/ssh/shosts.equiv stays updated. The issue i''m finding is that if I include a "tag == anything" in the Collector filter, it collects all resources EXCEPT it''s own. In this case, the known_hosts and .equiv files will have all the other hostnames, but not it''s own hostname.

I'm trying to screen the call transfert to my cell phone using a exemple found on the web. http://www.voip-info.org/wiki-Asterisk+cmd+Dial It work partially: while I'm prompted to accept the the caller still her the music. But wether I accept the call or reject it I'm put in communication with the caller. I can see in the log that MARCO_RESULT is set to CONTINUE when I reject the call

I am running into two problems: 1) The ringing stops during call screening once the extension picks up (but has not yet approved call) When a person calls and choose an extension, the Dial link is called and the person hears the ring -- but as soon as the receiving caller picks up (even though they have to approved the call), the ringing stops... the person calling hears silence. This is

I am trying to make a dialplan that when I dial 90 I can go round a whole set of extensions and leave them a short message, hangup and go on the next one. I use the M facility of dial, with something like this [messages] exten => 90,n(calcnextchan),Set(DIALCHAN=...) exten => 90,n,Dial(${DIALCHAN},30,M(domessage)) exten => 90,n,Goto(calcnextchan) [macro-domessage] exten =>

Hello, I use the following macro to screen calls when they come in. Priv-instruct-custom says "press 1 to accept, press 2 to reject" However, when no input is made (or the call goes to my mobile's voicemail and therefore no input is made), the result is that the ACCEPT variable is not set and then the GotoIf statement fails. How can I resolve this? Can I simply preset the ACCEPT