similar to: Xorcom Bri and asterisk crashes

Hi all, After running fine for a few months now asterisk seems to hang frequently , still functioning but the DAHDI channels seem busy (users report a busy signal when calling or being called) A reboot will allow it to run for another day or maybe 2 or 3 till the problem occurs again. running stock Asterisk 1.6.2.9-2+squeeze2 on Debian with stock kernel 2.6.32-5-686 i get the following

I'm having problems getting an Xorcom USB Bri 4 dialling out in Australia. I can receive calls into the system without an issue, but I can not for the life of me dial out of the system. Below are my configs, I'm hoping its something simple that I just can't see as I've been looking at it for to long. Can any one point me in the right direction. P.S. Yes it is meant to be in TE

I am getting the following compile error on centos 5. Any suggestions? Jerry CC [M] /usr/src/digium/zaptel-1.4.1/xpp/xbus-core.o /usr/src/digium/zaptel-1.4.1/xpp/xbus-core.c: In function ?debugfs_open?: /usr/src/digium/zaptel-1.4.1/xpp/xbus-core.c:171: error: ?struct inode? has no member named ?u? /usr/src/digium/zaptel-1.4.1/xpp/xbus-core.c: In function ?proc_xbus_command_write?:

I get the following error when trying to compile zaptel on CentOS 5 kernel 2.6.18-8.1.3.el5 CC [M] /root/asterisk-src/zaptel-1.2.17.1/xpp/xbus-core.o /root/asterisk-src/zaptel-1.2.17.1/xpp/xbus-core.c: In function ? /root/asterisk-src/zaptel-1.2.17.1/xpp/xbus-core.c:171: error: ? has no member named ? make[3]: *** [/root/asterisk-src/zaptel-1.2.17.1/xpp/xbus-core.o] Error 1 make[2]: ***

Hi, I'm having some trouble setting up a Xorcom Bri 4 port. I have compiled asterisk and zaptel using the Bristuff bristuff-0.3.0-PRE-1y-g patches. So I'm running zaptel-1.2.17.1 and asterisk-1.2.18. The problem I'm having is that for one I get no LEDs showing if the unit is in TE and NT mode (not a issue for me but may have some impact on things) I have no errors in any logs I

Hello, I recently got a problem I have never seen during my previous installations. I have a Xorcom device with 4 BRI and 8 FXS ports. I use ubuntu Linux and asterisk 1.4.22. Everything works fine but after some time zap channels disappear in asterisk. root at pbx1:~# cat /proc/zaptel/* Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" AMI/CCS NOTOPEN 1 XPP_BRI_TE/00/00/0 Clear

Hi All Just a quick check on the best way to ensure multiple cards/devices load in the correct order. Asterisk 1.8 with Sangoma A101 had no problems until we introduced an Astribank. root at pabx377:/etc/asterisk# dahdi_hardware -v usb:001/004 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1060395] CONNECTOR=@usb-0000:00:1d.7-3 XBUS-00/XPD-00:

On attempting to make Zaptel 1.2.16 on FC5, I get the following messages: /usr/src/zaptel-1.2.16/xpp/xbus-core.c: In function 'debugfs_open': /usr/src/zaptel-1.2.16/xpp/xbus-core.c:171: error: 'struct inode' has no member named 'u' make[3]: *** [/usr/src/zaptel-1.2.16/xpp/xbus-core.o] Error 1 make[2]: *** [/usr/src/zaptel-1.2.16/xpp] Error 2 make[1]: ***

Is there a zaptel mailing list? Here's the error: CC [M] zaptel-1.4/xpp/xbus-core.o zaptel-1.4/xpp/xbus-core.c: In function ?debugfs_open?: zaptel-1.4/xpp/xbus-core.c:171: error: ?struct inode? has no member named ?u?

I'm trying to compile latest zaptel-1.2.13 and I'm getting following errors: /usr/src/Asterisk-1.2.14/zaptel-1.2.13/xpp/xbus-core.c: In function ?debugfs_open?: /usr/src/Asterisk-1.2.14/zaptel-1.2.13/xpp/xbus-core.c:171: error: ?struct inode? has no member named ?i_private? make[5]: *** [/usr/src/Asterisk-1.2.14/zaptel-1.2.13/xpp/xbus-core.o] Error 1 make[4]: ***

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

I went to run my queue_log parser so that I could send out a monthly report to one of my customers, and I noticed that every valid call complete action (COMPLETEAGENT, COMPLETECALLER) is followed by an ABANDON: Here is a complete-caller: 1123325015|1123325011.2|mainq|NONE|ENTERQUEUE||00110102102 1123325020|1123325011.2|mainq|Agent/21|CONNECT|5

Hello, I've one astribank with 8 FXO unit and 8 pstn lines connected to the astribank. When I receive calls on my ipphone I get always Unknown callerid. It's is possible to receive the callerid from the lines on the astribank unit? This is my config: [channels] language=es context=from-zaptel signalling=fxs_ks ;rxwink=300 usecallerid=yes callerid=asreceived ;cidsignalling=bell

CC [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/vpmadt032.o CC [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/GpakApi.o CC [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/../voicebus.o LD [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/wcte12xp.o

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard,

, address 2 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.344611] ERR-xpp_usb: XBUS-00: x= usb_listen: usb_submit_urb failed: -19 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353325] INFO-xpp: XBUS-00: [] D= isconnecting Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353373] Zaptel: Master changed = to XBUS-00/XPD-01 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353382] Zaptel: Master changed = to

I'm having trouble getting a xorcom set up. A large part of the problem is that the box is a _long_ way away and I can't get to/at it easily, so while I could probably fix this in a few hours if the machine were in front of me, I'm struggling over a slow unreliable laggy link. Ok, enough whining from me. I have a new Xorcom plugged into the usb of a Suse 11 machine I built Dahdi

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.8.0-rc5 DAHDI-Tools-v2.8.0-rc5 dahdi-linux-complete-2.8.0-rc5+2.8.0-rc5 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete *** THIS RC FIXES

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.8.0-rc5 DAHDI-Tools-v2.8.0-rc5 dahdi-linux-complete-2.8.0-rc5+2.8.0-rc5 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete *** THIS RC FIXES

Hi Guys, An 8 channel Astribank is connected to Trixbox 2.8 and I ran freepbx-module-zapauto but I get the following when running these commands and can't make calls out: [Trixbox]# dahdi_genconf xpporder /usr/sbin/dahdi_genconf: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc pbx*CLI> dahdi show channels Chan Extension Context