similar to: TE420 PCI Express Card

XO CAN supply callerid NAME on a NI2 PRI connection. We have three of them and they work great. Its takes a little doing to get to someone at XO that knows what they are doing but XO does have some VERY good tech support people that know how to get things done. It just takes a bit of work to find them. Outgoing CNAM is a different beast however. They can't take it via IE. You need to get

Hello, I'm having problem connecting my Asterisk 1.4.29.1 with Digium TE420 to providers Cisco 2800 with VWIC-1MFT-E1 card. the same card runs fine with another E1 provider. TE420 led's lite green. Message type: RELEASE COMPLETE (90) < [08 02 80 ac] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) < Ext: 1 Cause:

I have just built a new system using an HP DL360G7 with a TE420 T1 card, and this is the first system using a generation 7 server. I'm not sure whether that is an issue or not. I am using Asterisk 1.2, and Zaptel 1.4.12.1 with patches for GEN5 of the TE420 card. I have successfully used this combination on several systems based on the DL360G6 and TE420(gen5), which have been in production for

I have the following software installed in a Centos Box with a TE420 (5th Gen) card. . Centos 6.5 64-bit . Asterisk 1.4.22 . dahdi-linux-complete-2.9.1.1+2.9.1 . libpri-1.4.14. Even without plugging in the ISDN into span 1, all 4 spans are flashing red. Plugging an E1 into span 1 makes no difference. My system.conf is just simply: loadzone=au defaultzone=au span=1,1,0,ccs,hdb3,crc4 bchan=1-15

You will also need your SIP clients that are behind the same NAT to support ICE (Interactive Connectivty Establishment) if you want calls between them. Xten Eyebeam and Snom phones are the only ones I'm aware of that support it. On 7/5/05, Ricardo Martinez <rmartinez@redvoiss.net> wrote: > And even worst. > There are some kind of NAT that STUN does not work. > You can check

Did Linksys really use Asterisk for the SPA9000 software? -- Andres Technical Support http://www.telesip.net

<rant level="mild"> I tried emailing support and got a rejection notice saying to go via the website, which then wants registered product details before it will let me enter a support request. Unfortunately, the card was bought by my customer, not by me :-( So I'll just have to ask here... </rant> I am currently trying to replicate an existing system build using new

Hello! Just got new server with TE420. Not all four spans will be used immediately, but spans not configured or not connected blink red light. Is it possible to turn span off, so my colleagues will not eventally tell me that something is wrong with asterisk? :-) Thank you!

Hi All I am getting a strange prblem while installing TE420 on a Dell Poweredge T100 machine. I get a "TE4XXX: version Synchronisation error " nad the machine hangs which needs a hard reboot . Its a new machine and if i install TE410P then installation is successful. Strangely enough i have a working TE420F on another Dell POweredge T100 machine at a different locaiton ... The DELL tech

Hi I'm having problems getting the TE420 working in HP DL380G5 servers. The cards don't seem to be detected 100% by the BIOS. With two cards in the server they are never detected. things I've tried: 1 Update firmware to latest (P56) for the server 2 change irq settings 3 disable all onboard devices on server and remove raid controller 4 different cards in different slots What I

I had a friend yesterday showing me his new T-mobile blackberry with WiFi Voip. I could not believe it until I actually saw him making calls. There is no T-Mobile cell coverage at my house but he was able to simply access the WiFi router and make the call. It appears this VoIP offering is tightly integrated since you use the same phone number to make and receive calls over WiFi or Cell.

On 8/27/10, asterisk-users-request at lists.digium.com <asterisk-users-request at lists.digium.com> wrote: > Send asterisk-users mailing list submissions to > asterisk-users at lists.digium.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.digium.com/mailman/listinfo/asterisk-users > or, via email, send a message with subject or body

Not to sound like a broken record but...... Is there any word on the availability of the FXO cards for the TDM400P? I have an application that would benefit. If it has been dropped please let me know. Thanks Gene Kochanowsky

Hi, We are running 1.4.22 and have been experiencing problems with certain IVRs and DTMF Tone duration. We would like to be able to increase DTMF Tone duration by 50 to 100ms over what the user is pressing on his phone. We have a PRI test circuit and an analyer in between to measure tone duration. We have tried setting chan_dahdi.conf parameter 'toneduration', but that does not do

Hello everyone. I have a timing slips errors and I can't understand what source of the problem is. My installation has 2 digium cards: TE420 and TE220 cards in one server. There are 3 spans (E1) to PSTN and 3 spans to internal PBS stations - normal installation for transit communication. Span configuration is: span=1,1,0,ccs,hdb3 #TE420 - first port. To PSTN. span=2,0,0,ccs,hdb3 #TE420 -

I solved the problem. "action.d/iptables-custom.conf" include only udp. service fail2ban restart Thank you. On Sun, Sep 13, 2015 at 9:17 PM, Andres <andres at telesip.net> wrote: > On 9/13/15 11:16 AM, Gokan Atmaca wrote: >> >> Hello >> >> I'm using the Fail2ban. I configuration below. I want to try to >> prevent the continuous password.

Hi, Is anybody using "contexts" successfuly with "mysql-vm-routines"? Everything works well except for the fact that the voicemails are not left in their respective context(the one defined per mailbox in the mysql users table). They are all dropped in the main directory. I we switch back to definitions in voicemail.conf all returns to normal. -- Playing

Four years ago, I faced a real dilemma in my business: the Visual Voice PRI dll had a bug that considered unanswered any call after ringing for 20 seconds. This bug was in fact killing my business, because for international calling, the setup of the call was already close to 20 seconds on many cases. Furthermore, the vendor, Artisoft, had cowardly sold the software to Dialogic, and Intel-Dialogic

who has purchased a V400 card from Varion ? I need some help . please help me . thanks a lot

Does anybody out there have any evidence that Sipura support is still in operation? rgds benjk -- Sunrise Telephone Systems, 9F Shibuya Daikyo Bldg., 1-13-5 Shibuya, Tokyo, Japan. NB: Spam filters in place. Messages unrelated to the * mailing lists may get trashed.