similar to: DUNDi problem: offline peers still in request EID/EID_DIRECT field?

Hi All, I've been banging my head on a small dundi problem... I have two * servers setup, both have almost identical dundi.conf files: root@tsjonge:/opt/asterisk/etc# cat dundi.conf [general] department=thuis organization=pipsworld locality=Amsterdam stateprov=NH country=NL email=remco@pipsworld.nl phone=+31207508308 ;bindaddr=0.0.0.0 ;port=4520 entity=00:02:b3:49:69:5e ttl=16

Hi few weeks ago I read about redundancy (HA) of asterisk boxes using DNS, DUNDi, so I decided to give it a try. OS FreeBSD 6.1-RELEASE, asterisk 1.2.7.1 on one peer I get: lk110*CLI> dundi show peers EID Host Model AvgTime Status 00:11:43:3d:69:e6 195.28.109.37 (S) Symmetric Unavail OK (1 ms) 1 dundi peers [1 online, 0 offline, 0

Hi guys, Is it possible to allow remote peers to connect to your local DUNDi Asterisk box, even if you don't have them listed in the dundi.conf? Alex

Hi all On the Asterisk website in the blog its announced that in a next release Asterisk would support dynamic DUNDi weitht values. I've installed Asterisk 1.4.4 (via aptitude install) but this doesn't seem to work. Has somebody some experience with this or know whether this feature is already implemented or not? Thanks! Andre -------------- next part -------------- An HTML attachment

Hi. I am trying to pass a variable from one Asterisk PBX to another. I'm using DUNDi with IAX2. Is there a way to do it? I tried the following but it fails. On peer1: [dundi-outgoing] switch => DUNDI/priv exten => s,1,Set(CDR(userfield)=test) exten => s,2,Set(DUNDIVAR=${ARG1}#TEST) exten => s,3,NoOp(Passing ${DUNDIVAR} to DUNDi peer.) exten => s,4,Goto(${DUNDIVAR},1) On

Hi guys!! This is something that have always bother me, hope you can help me... :) I've 8 server connected using IAX / DUNDi, it works just fine. However, sometimes when some of our links goes down the server takes forever to appear back as OK at DUNDi's list and people can't call the other Box. It's happening right now: CLI> dundi show peers 00:14:22:16:54:c5 200.X.X.6

Hi all On the Asterisk website in the blog its announced that in a next release Asterisk would support dynamic DUNDi weitht values. I've installed Asterisk 1.4.4 (via aptitude install) but this doesn't seem to work. Has somebody some experience with this or know whether this feature is already implemented or not? Thanks! Andre -------------- next part -------------- An HTML attachment

Dear All, For those who celebrate Eid. I would like to wish you a very Happy Eid Mubarak. For those who do not know what it is, Its a Prayer in memory of Ishmael son of Abraham, when he attempted to sacrifice his beloved son on request by god. Muslim's celebrate it with a sacrifice of a goat every year. I belive Christians & Jew's belive in the same. Peace and Harmony to all.

I'm looking at finding a way for my Macro(dundi-dundi-test,${ENTEN}) when I dial out on the dundi-test network to return a +101 to my [dundi-test-out] context, if the number being dialed on the dundi-test network does not exist, then I will route the call out using my pstn or voip connection i have. I have a feeling it will have to be the switch => DUNDi/dundi-test that will have to return

Dear community, Please help. I've been looking around the internet (and in this great forum) for help with DUNDi setup between servers (I'm using Elastix) and while I can get my servers to lookup extensions on each other very well, I have not been able to successfully make calls between servers. For my test environment, I have 3 servers setup for now, and these are the steps I've

>From the reading and testing I have done it doesn't look like SIP supports a username and password in the Dial string. I currently have the following mapping. priv => dundi-extens,0,SIP, dundi:pass at 1.1.1.1/${NUMBER},nounsolicited,nocomunsolicit,nopartial On the sending side I see NOTICE[31598] chan_sip.c: Conflicting extension values given. Using 'dundi' and not

I have three Asterisk boxes. Each has the following in dundi.conf: 180net => dundi_local,0,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx1,1,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx2,2,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx3,3,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial My iax.conf on all three

Hi all, I'm new in asterisk and I got to set up a dundi config for my work. I have 2 PBX for the test, the two PBX are in the same local network PBX A : 192.168.199.23 PBX B : 192.168.199.21 my config files : (on PBX B , the config files on PBX A looks like it) /etc/asterisk/dundi.conf [general] bind=192.168.199.21 port=4520 cachetime=5 ttl=32 autokill=yes entityid=00:30:18:4C:33:53

Are there DUNDi CLI commands for Asterisk 1.4? I have searched google and I only see the dundi commands in Asterisk 1.6, although I see reference to them in older version's of Asterisk such as Asterisk 1.4 here: http://www.asteriskguru.com/tutorials/cli_cmd_14.html. When I view the CLI commands through help I don't see any of the dundi commands and there are errors when I run a command

Greetings list, I've been using DUNDi for some time now to prevent calls between users going out via PSTN if there's no need, set up as follows: [macro-dundi-e164] exten => s,1,Goto(${ARG1},1) include => dundi-e164 [dundi-e164] include => in-e164 switch => DUNDi/e164 My outbound call macro tries [macro-dundi-e164] first, if that fails then goes onto PSTN connectivity.

Hello, I have a weird problem. My * server, a Pentium Celeron 1200 with 512 MB Ram and a Digium E100P card, is performing very well for IAX2, SIP and ZAP communication. There is no delay in transcoding, no packet loss etc etc. Now I added DUNDi, and I added +/- 8 peers in the dundi-test context and 1 peer in the GPA-bound e164 context. My server shows all but 1 peer as OK. DUNDi Ping times

Hi peeps, I've been struggling with DUNDi for a few days now and I can't seem to make call from Asterisk A to Asterisk B. If I do a "dundi show peers", it finds the other peer but I can't seem to make any calls. Can anybody help me out here. Here's the situation: Machine 1: Debian with Asterisk 1.4.4 --> 192.168.1.103 Machine 2: AsteriskNOW --> 192.168.1.69 The

If one does a "dundi lookup", shouldn't the ${NUMBER} variable be replaced with the current value? ie. if I run "dundi lookup 4065 at priv" shouldn't I get an answer string like "IAX2/priv:pass@$192.168.250.27/4065 (EXISTS)"? The *CLI does not show me the dst extension: *CLI> dundi lookup 4065 at priv 1. 0

Hello, If one is using Dundi, and it returns multiple, weighted routes to a destination, how is that applied in the dial-plan? asterisk*CLI> dundi lookup 1588XXXXXXX 1. 400 IAX2/dundi:A+RxFIkN4ws1kuZWrw3Ebw@XX.XX.XX.XX/1588XXXXXXX (EXISTS|NOUNSLCTD|NOCOMUNSLTD) from 00:30:48:71:26:70, expires in 1098 s 2. 400 IAX2/dundi:ZYm4dmxaDmzpp9kOPeA9LQ@XX.XX.XX.XX/1588XXXXXXX

Yes, nice website. But, where's the documentation regarding setup and configuration? Where's the examples? -----Original Message----- From: Olle E Johansson [mailto:oej@edvina.net] Sent: Sat 3/11/2006 1:23 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Subject: Re: [Asterisk-Users] Clustering / Dundi 11 mar 2006 kl. 07.54 skrev Douglas Garstang: