similar to: Zap dialling issues

Hi, I'm having some trouble setting up a Xorcom Bri 4 port. I have compiled asterisk and zaptel using the Bristuff bristuff-0.3.0-PRE-1y-g patches. So I'm running zaptel-1.2.17.1 and asterisk-1.2.18. The problem I'm having is that for one I get no LEDs showing if the unit is in TE and NT mode (not a issue for me but may have some impact on things) I have no errors in any logs I

Hello, I recently got a problem I have never seen during my previous installations. I have a Xorcom device with 4 BRI and 8 FXS ports. I use ubuntu Linux and asterisk 1.4.22. Everything works fine but after some time zap channels disappear in asterisk. root at pbx1:~# cat /proc/zaptel/* Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" AMI/CCS NOTOPEN 1 XPP_BRI_TE/00/00/0 Clear

Hi all, After running fine for a few months now asterisk seems to hang frequently , still functioning but the DAHDI channels seem busy (users report a busy signal when calling or being called) A reboot will allow it to run for another day or maybe 2 or 3 till the problem occurs again. running stock Asterisk 1.6.2.9-2+squeeze2 on Debian with stock kernel 2.6.32-5-686 i get the following

, address 2 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.344611] ERR-xpp_usb: XBUS-00: x= usb_listen: usb_submit_urb failed: -19 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353325] INFO-xpp: XBUS-00: [] D= isconnecting Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353373] Zaptel: Master changed = to XBUS-00/XPD-01 Dec 30 21:42:08 wedekindpbx1 kernel: [ 3746.353382] Zaptel: Master changed = to

Hello List, it is a very long time since I wrote here.... It has been still in Zaptel times.... Today I am run into a related problem: I can't get a DAHDI setup to work 100%. I am configuring an Astribank XR00013 (BRI, two ISDN ports). At some degree the installation (latest DAHDI drivers, Asterisk 1.6.0.18 on Centos 5.x) works. I can get incoming calls to the dialplan context that is

We have recently install an asterisk solution with about 60 physical extensions. While the system is running it runs reasonably well (Still have a few teething problems) but twice now they have experienced a degradation in voice quality and dropped calls and then finally asterisk completely crashes out. Restarting asterisk will work for a little while and it will crash again, each time less time

Hi All Just a quick check on the best way to ensure multiple cards/devices load in the correct order. Asterisk 1.8 with Sangoma A101 had no problems until we introduced an Astribank. root at pabx377:/etc/asterisk# dahdi_hardware -v usb:001/004 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1060395] CONNECTOR=@usb-0000:00:1d.7-3 XBUS-00/XPD-00:

Hello, I've one astribank with 8 FXO unit and 8 pstn lines connected to the astribank. When I receive calls on my ipphone I get always Unknown callerid. It's is possible to receive the callerid from the lines on the astribank unit? This is my config: [channels] language=es context=from-zaptel signalling=fxs_ks ;rxwink=300 usecallerid=yes callerid=asreceived ;cidsignalling=bell

I am getting the following compile error on centos 5. Any suggestions? Jerry CC [M] /usr/src/digium/zaptel-1.4.1/xpp/xbus-core.o /usr/src/digium/zaptel-1.4.1/xpp/xbus-core.c: In function ?debugfs_open?: /usr/src/digium/zaptel-1.4.1/xpp/xbus-core.c:171: error: ?struct inode? has no member named ?u? /usr/src/digium/zaptel-1.4.1/xpp/xbus-core.c: In function ?proc_xbus_command_write?:

I get the following error when trying to compile zaptel on CentOS 5 kernel 2.6.18-8.1.3.el5 CC [M] /root/asterisk-src/zaptel-1.2.17.1/xpp/xbus-core.o /root/asterisk-src/zaptel-1.2.17.1/xpp/xbus-core.c: In function ? /root/asterisk-src/zaptel-1.2.17.1/xpp/xbus-core.c:171: error: ? has no member named ? make[3]: *** [/root/asterisk-src/zaptel-1.2.17.1/xpp/xbus-core.o] Error 1 make[2]: ***

On attempting to make Zaptel 1.2.16 on FC5, I get the following messages: /usr/src/zaptel-1.2.16/xpp/xbus-core.c: In function 'debugfs_open': /usr/src/zaptel-1.2.16/xpp/xbus-core.c:171: error: 'struct inode' has no member named 'u' make[3]: *** [/usr/src/zaptel-1.2.16/xpp/xbus-core.o] Error 1 make[2]: *** [/usr/src/zaptel-1.2.16/xpp] Error 2 make[1]: ***

Is there a zaptel mailing list? Here's the error: CC [M] zaptel-1.4/xpp/xbus-core.o zaptel-1.4/xpp/xbus-core.c: In function ?debugfs_open?: zaptel-1.4/xpp/xbus-core.c:171: error: ?struct inode? has no member named ?u?

Hi Guys, An 8 channel Astribank is connected to Trixbox 2.8 and I ran freepbx-module-zapauto but I get the following when running these commands and can't make calls out: [Trixbox]# dahdi_genconf xpporder /usr/sbin/dahdi_genconf: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc pbx*CLI> dahdi show channels Chan Extension Context

I'm trying to compile latest zaptel-1.2.13 and I'm getting following errors: /usr/src/Asterisk-1.2.14/zaptel-1.2.13/xpp/xbus-core.c: In function ?debugfs_open?: /usr/src/Asterisk-1.2.14/zaptel-1.2.13/xpp/xbus-core.c:171: error: ?struct inode? has no member named ?i_private? make[5]: *** [/usr/src/Asterisk-1.2.14/zaptel-1.2.13/xpp/xbus-core.o] Error 1 make[4]: ***

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard,

CC [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/vpmadt032.o CC [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/GpakApi.o CC [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/../voicebus.o LD [M] /home/silentm/MessageNet/digium/zaptel-1.4.10/kernel/wcte12xp/wcte12xp.o

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.2 DAHDI-Tools-v2.9.2 dahdi-linux-complete-2.9.2+2.9.2 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * Mostly stability patches affecting

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.2 DAHDI-Tools-v2.9.2 dahdi-linux-complete-2.9.2+2.9.2 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete * Mostly stability patches affecting

The Asterisk Development Team has announced the releases of: DAHDI-Linux-v2.9.2-rc2 DAHDI-Tools-v2.9.2-rc2 dahdi-linux-complete-2.9.2-rc2+2.9.2-rc2 This release is available for immediate download at: http://downloads.asterisk.org/pub/telephony/dahdi-linux http://downloads.asterisk.org/pub/telephony/dahdi-tools http://downloads.asterisk.org/pub/telephony/dahdi-linux-complete This release is