similar to: TE412 / HPDL380G5 / * 1.4 / CentOS 4.5 Experience

Another day, another apparant unexplained hardware incompatibility. I have a TE412P and a TDM400B living quite happily in a whitebox using an Intel motherboard: http://www.intel.com/design/servers/boards/se7230nh1-e/index.htm I tried to move to an IBM x3650 system. It uses a slightly newer chipset, but apparantly it's in the same family. The SE-7230 board has been EOL'd and the

I'm hoping people can suggest some ideas for debugging a problem that I'm having with DTMF. Unlike most of the DTMF problems reported here, it has nothing to do with Asterisk interpreting DTMF. My problem is with the synthesis of DTMF tones on outbound calls on a PRI connected to a TE412P card. I'm running * 1.4.10.1 with Zaptel 1.4.4. It is important to note that these problems

I am getting the following error compiling Zaptel 1.2.17.1 and 1.4.2.1 on a CentOS 5 machine: Compile xpp (version trunk-r3495) CC [M] /usr/src/zaptel-1.2.17.1/xpp/card_fxo.o CC [M] /usr/src/zaptel-1.2.17.1/xpp/card_fxs.o CC [M] /usr/src/zaptel-1.2.17.1/xpp/xbus-core.o /usr/src/zaptel-1.2.17.1/xpp/xbus-core.c: En la funci?n ?debugfs_open?: /usr/src/zaptel-1.2.17.1/xpp/xbus-core.c:171:

I moved my TDM400B cards (first two cards are 40's, third is a 31, last is an 04) from one computer to another, copied all the config files, and now the LED on the line 11 - third line of the third card doesn't go on (it used to on the previous computer). I can get by telling * not to use this line for now but does anyone have any suggestions for getting it to work? Unseat and

Recently I put callwaiting=yes in zapata.conf because customers want to speak to the operator in person, not leave her a voicemail, when she's busy with another caller. But now she can't transfer either of the calls (which she can do when there's only a single call). The operator has an analog phone connected to a TDM400B FXS line. The calls are coming from PSTN lines connected

Hi, I am about to purchase an Eurotech PRI E1 GSM & CDMA Gateway to operate with my Asterisk's TE412P interface. Anyone here has any experience of having this combination? Any success or failure stories would be greatly appreciated. Thanks in advance. Ash

Is there a cable length limit to use with a fxsmod (TDM400B) ? I noticed that if I use a very long cable 148 feet, I can hear some parasite : I hear the radio ! If I use a short cable, there is no problem... Thanks for help, St?phane HENRY

Hi, I was able to implement T122p one port PRI and was able to call out, but I am planning to use TE412p (includes echo cancellation) 4 port digital card (PRI), I wanted to know can asterisk support 3 four port PRI cards (12 PRI connections) with proper hardware like dual core quadcore processor and 8gb RAM in one server? Also I was planning to implement using 64 bit architecture with Asterisk:

Hello, 1. A patch allowing "capture audio streams in a way that will allow [us] to debug (and presumably fix) the problem" was mentioned by Kevin. Anything new about it ? I couldn't find it in Zaptel 1.2.17.1 nor 1.4.2.1 changelog. 2. Is there any Mantis bug report allowing someone to track this "HPEC audio clipping" feature ? It seems to me this hasn't been reported

I'm scoping out HA for a relatively simple Office/Call Center PBX. Current setup uses a TE412P with 4 PRI our telco with SIP hard/soft phones for users. Some outbound also goes to a SIP provider. Active/Active looks to be too much hassle for an installation this size, so we're looking at adding an extra * in an active/passive configuration with Linux-HA in between them. Does anyone

Hello list, I'm currently looking into building a new Asterisk server, due to some codec problems i've got to transcode most of my channels between Alaw -- G729. Is there any indication on how many channels you would be able to transcode on a certain platform? I'm looking into dual Xeon or dual Opteron configurations, which of these platforms would perform better? And how much power

Can I run two instances of asterisk sharing a single te412p ? I want to be able to have several asterisk servers (for testing various scenarios) running on one server. I was wondering if these asterisk processes could share a zaptel/dahdi card nicely. Julian

Hi all, We need to get better echo cancellation on an Asterisk gateway. Currently it has two TE410P (1st gen) cards. So would it be possible to just buy two VPM450M cards ? Or do we need to buy two new TE412P cards ? In that case a Sangoma A108d card would be nice as well ? What configuration gives the best audio quality ? Thanks, Leon de Rooij leon at scarlet-internet.nl

Dear Users, I am fairly new to Digium and Asterisk. I wanted to know that if I use the Digium product THREE Digium Wildcard TE412Ps? (Quad E1 Card) how many calls can I handle simultaneously. I want to use the cards with the following Configurations: Intel? Xeon? 3.00GHz/800MHz, 2M Processor 1GB PC2-3200 DDR2 SDRAM (2x512MB + 2X1GB) memory Integrated Dual Channel Ultra320 SCSI Adapter NC7781

I have just realized while trying to research asterisk not acking incoming calls that the tdm400b card is stamped rev H, but when I issue the zap show status command in the manager interface, it indicates Wildcard TDM400P REV E/F Board 1 Which do I believe?? -- Best Regards Greg Cirino Spam and Virus Free Email included with every email account Cirelle Enterprises Inc. 25 Indian Rock Rd

I'm rolling out an installation with snom 360s in the near future. Simple SOHO configuration, 3 FXOs hanging off a TDM400B, 4 snom 360s, a snom 200, some variant of IAX softphone, and an IAXy or Sipura 2002. I have the 360's set up to subscribe and notify for the line use lights, which works like a charm for interoffice calling (between the 360's, anyway. The IAXy, 200 and,

Just to share some experience with everyone about what happened today to our Asterisk 1.4 box with Digium TE412P card. We had an unscheduled power outage which shut down the Asterisk box. When the power went up, Asterisk came back up okay but the ports on the card were all red. Zttool show red alarm and cat /proc/zaptel/1 show red alarm today. Both incoming and outgoing cannot be made. When a

Hi there, Could everyone that has a working production Asterisk server that uses a Digium telephony card as a BRI/PRI gateway let me know what motherboard/processor your server uses? We use a Digium TE210P as our telephony card. We have tried a couple motherboards, and neither is giving us satisfactory zttest scores. The machine we have in production right now is a Biostar U8668-D (VIA

Hi all I have a server that has two TE412P (T1/E1+DSP) cards installed. One of them configured as an E1 PRI connected to PSTN and another one configured as a T1 E&M connected to Avaya PBX. Each card only uses two ports, so there are 2 E1 lines and 2 T1 lines connecting to this server. The purpose of this server is as a TDM trunk gateway that gets call from E1/T1 and then forward to an IP-PBX

Can someone point me in the right direction to find documentation on best practices when setting up a new Asterisk server? I'm using RHES4 and Dell 1750 with TE412P. My current problems are frequent crashes and choppy audio so I think I can easily tweak these out of the picture. -------------- next part -------------- An HTML attachment was scrubbed... URL: