similar to: Modification of Caller ID based on context

I receive calls over a T1 with callerid and then *ani*dnis*. I am able to strip out the ani and the dnis in the dialplan but when I try to set the caller ID to be the ani, it looks ok but then if I do a NoOp callerid on the next line, I get unknown. Here is the section of my dialplan: exten => _*NXXNXXXXXX*NXXNXXXXXX*,1,Set(ANI=${EXTEN}) exten =>

Guys... Ive been having problems with my callerid and I have no more clues as to what I could be.. dates and times stamped on voicemail and info received on the phones display are off by +6 hours and also the date for example today is Jan 02 :) What can I do to modify this? __________________________________________________________________ Anton Krall

Im trying to figure out the base way to check the callerID being sent to my Asterisk box and use it if it is a valid NANP number, but replace it with a static NANP number if it is not. (Why? I have a few carriers that require this, and a few international users - if it happens to take one of the carriers that require it, I want it to set a static number that is valid). I'm playing

I need to deploy some quasi-virtual-PBXes, and I'd like to avoid having to be hands on for each new phone number deployed... so I would like to set up some administrative extensions that can record greetings... lets say: [admin] exten => 8(NXXNXXXXXX),1,Record($1|-greeting.gsm) [incoming] exten => _(NXXNXXXXXX),1,Playback($1|-greeting) exten => _(NXXNXXXXXX),2,Goto($1,1000) exten

I have a Asterisk server setup and I am able to connect to the server using a soft client 'x-lite' and call and leave a message on my second extension 102. I have setup a Vitelity account and add what I believe to be the correct information to my sip.conf and extension.conf. I would like to setup incoming and outgoing calls with voicemail support. I've searched all over but many of the

This is what i found on Cisco's site: "Symptoms: Media negotiation fails for SIP calls and the terminating gateway replies with a "488" message to an Invite message. Conditions: This symptom is observed on a Cisco platform when the terminating gateway is configured with the G279B (annex B) codec and when the Session Description Protocol (SDP) for the incoming Invite message

Hi, all. I'm probably doing Something Dumb(tm), so please feel free to point out whatever I'm missing, no matter how stupid. Anyway, I've got IAX set up to Vitelity. When I try to call my DID, I get: Rejected connect attempt from 64.2.142.19, who was trying to reach '6031234567@' This leads me to my first question -- why doesn't it show a context? (My second is,

Hi list, I have to connect two asterisk box, in this scenario: [asterisk1]----sip----[asterisk2]----PSTN I must use sip, cos we'll use cisco rtp header-compression to save bandwidth. Could you tell me the best way to send calls from asterisk1 to asterisk2, since I cannot use IAX trunking? Thanks in advance Eduardo

Hola, What would a valid regexp in Asterisk be to identify a NANP number, i.e., NXXNXXXXXX? Sincerely, Brent A. Torrenga Torrenga Engineering, Inc. 907 Ridge Road Munster, Indiana 46321-1771 tel:+1 219 836 8918 x325 fax:+1 219 836 1138 email:brent.torrenga at torrenga.com web:www.torrenga.com

Hello, How would I setup where I call into my number and press say 911 and then it would ask for a pass and would accept it and then would prompt for a number so I could call out of my number on the road? Joshua __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com

I'm trying to add a second extension to my setup. The second device is able to successfully connect to the Asterisk server. I am unable to contact extension 101 from 102 and vise-versa. Also are my context setup logically or is there a better fashion to organize them? My error is at the bottom. Here is the extension.conf [default] ; ; By default we include the demo. In a production system,

I'm having trouble setting callerid with teliax. I use a simple dial-out subroutine to set the callerid depending on the calling extension, and then dial out. Teliax is saying they're not seeing any callerid info. [DialOut] ; subroutine for dialing out. exten => s,1,NoOp(Context: DialOut called with outgoing number ${ARG1} ) exten => s,n,NoOp(${CALLERID(num)}XXXX) exten =>

I haven't been able to find much support for the RDNIS or DNID variables online. I am trying to prove a concept of call routing before we move towards development of a production system. I need to have calls routed coming into a call center based on DNIS. What type of syntax is needed in the extensions.conf file and how can I test it with a softphone (ie: can I emulate the DNIS from xlite)?

Is it possible to strip the plus sign from the ${EXTEN} var on an incoming call? We have our system setup to deal with incoming calls to numbers without a plus sign, lots of AGIs and databases we don't want to have to change. We have seen things like this ${EXTEN:1} which you can use in the dial command but we want to basically change the ${EXTEN} var right off when it comes into

[This email is either empty or too large to be displayed at this time]

hello every body, i have big problem to configure h323 trunk between cisco router and asterisk 11.13.1 which uses ooh323 module. any body knows if ooh323 module can work with cisco routers or not???? (in gateway mode, it is ok and register in cisco gatekeeper but i can not configure trunk h323) any comments or hints are really appreciated. SAM -------------- next part -------------- An HTML

> On 27Apr, 2015, at 16:39, Motty Cruz <motty.cruz at gmail.com> wrote: > > forgot to mentioned I am running Asterisk 1.8.22.0 on CentOS. > > Thanks, > > > On 04/27/2015 02:38 PM, Motty Cruz wrote: >> here is what I have: >> exten => _9XXXXXXX,1,Set(l_HomeAreaCode=381) >> >> exten =>

Is it possible using asterisk to allow someone to dial in and remotely change where their call is forwarded to? For example, I'm working from home so I want my calls to go to 555 1234, now I need to go out for a bit so I'd like to phone the office and using DTMF tell the asterisk PBX to now forward my calls to my cell phone 555 3456 Has anyone implimented anything like this? R.

I am an Asterisk newby, and I cannot seem to get Caller ID information from our T1 line. When calls appear at the phones, they say the call came from "asterisk" and unknown number. I know how Caller ID information is passed on an analog phone line (between the rings) but with a T1 line, I don't know technically how it is done. I don't see the caller's number in the

i have extensions in locations across a number of telco area codes. when someone in seattle picks up and dials 91234567, it would be nice to transform it to 92061234567. i would prefer not to have an extension context per area code. it would be cool to be able to set a variable in the sip.conf bit for each phone with it's geographic default area code. or other folk may have a better hack.