similar to: FAX over T1

This is a follow up to an earlier post. Looking for a means to "individualize" incoming FAX, so as to distribute them to the intended recipient. While the PBX is based on Asterisk, it is not possible for me to "enter" the box to modify things, to any great degree. I thank those who mentioned IAXMODEM, earlier, but that seems a no go. Currently, there is a dedicated T1 into

Hi, Anybody lucky with this config inside an Asterisk server for dealing with FAX ? FXO_LINE ----> ASTERISK 1.4.2 ---> IAXMODEM ------> HYLAFAX TDM400P ZAPTEL 4.3.1 1 FXO port 1.41 ------------------------------------------------------------------------ I know Fax is not officially supported on TDM400P cards but I did not expect not being able of sending one

We have to rebuild our kernel to add support for a Mainpine fax board on a CentOS 5.5 board: http://www.hylafax.org/content/Handbook:Basic_Server_Configuration:Modem-specific_Guidance#Mainpine_IQ_Express We followed all steps, but when calling rpmbuild, we are getting: [root at hylafax SPECS]# rpmbuild -ba --target x86_64 kernel-2.6.spec Construction pour plate-formes cibles: x86_64

Hi, I'm putting together a fax solution for my company that utilizes T.38. I wanted to throw out my plan and get some feedback if anyone is doing something similar or sees a blatant problem with it. We're currently rolling out SPA-942 phones for the standard desk phone with vanilla Asterisk 1.4.15 (just upgraded it today) on the back end. Most calls for satellite offices are handled by

Hello, For those customers with only analog lines, who ask for fax2email and email2fax, whats the most reliable solution available and tested with Asterisk? Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120529/3e28b56e/attachment.htm>

Hi all, the company I work for has an aging Digital PBX attached to an E1. This PBX has a few analogue lines, one of which we use a 'traditional' fax machine on. I want to upgrade our PBX and Asterisk is almost a perfect fit. The only problem I can't seem to find a working solution for is Faxing. I don't want to use Hylafax or other similar methodologies. I believe there

I think I'm very close to getting IAXModem and Hylafax going, but my current inbound hylafax logs show this: Feb 23 10:09:37.98: [ 3638]: MODEM <Empty line> Feb 23 10:09:37.98: [ 3638]: MODEM TIMEOUT: waiting for v.21 carrier Two questions - 1) Does anyone know what step I missed here? (I.e. please help!) 2) Is there a document I should be working off of? Google doesn't seem to

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

Hello, I have anolog lines coming throug Dahdi to Asterisk Server, one of the anolog lines is used for fax line. I received fax fine without any problems using Iaxmodem with Hylafax Server. Outgoint fax is the problem, when IAXMODEM dial out using Dahdi channel, dahdi answers and start to dial the outside number however Iaxmodem thinks that dahdi is the remote fax machine and starts sending fax

Hello! I need to send Faxes from an Asterisk box to an Asterisk + Iaxmodem + Hylafax installed on other box. I have setup IAX trunks between this boxes, all works fine but can?t send faxes from one to other, Im trying with or without NVFaxDetect application but does not work. Is there a way to get it working?. If I connect a fax machine directly to Asterisk with Iaxmodem and Hylafax, I have no

I am testing out hylafax and iaxmodem. Submitting jobs to the hylafax server and having it then dial using iaxmodem is working fine. Hylafax server is talking to my Asterisk box that has a Sangoma A101 in it via iaxmodem via an IAX channel using ulaw. A call coming into a certain test DID comes into the Sangoma A101 then it goes to another box via IAX ulaw that uses the rxfax app to

what method is preferred: haylafax and Iaxmodem or spnadsp for faxing. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071228/e829632a/attachment.htm

Hi, I have a question: In my company a have a 100% IP Telephony implemented (Cisco Phones, Routers, Switches, etc). We are connected to our operator by two E1 lines. The PBX is on operator side (a H.323 Gateway is configured on call manager). I study the possibility to implement a Hylafax server. In some sites I read that with the IAXmodem is possible to have virtual modems, with don't so

hi folks. i'm experimenting with iaxmodem + hylafax using DID to determine where to send the fax to it's final destination. however i have difficulties passing the DID information from iaxmodem to hylafax. in extensions.conf: exten => _XXXX,1,Dial(IAX2/iaxmodem0/${EXTEN}|20|r) exten => _XXXX,n,Dial(IAX2/iaxmodem1/${EXTEN}|20|r) exten => _XXXX,n,Busy exten => _XXXX,n,Hangup

Hi Last month, people reported a crash with Asterisk 1.2.13 and spandsp-0.0.3 when receiving a fax using fax detection. Today I've tried 1.2.14 with the latest spandsp 0.0.3pre27 and with the snapshots for app_rxfax.c and app_txfax.c. The problem still happens. Has anyone found how to resolve this issue? I tried emailing Steve Underwood (with crash backtrace) but he hasn't

can anybody help me to choose the most reliable fax solution for * . after googling the net i found that there are at least two solutions for this, app_rxfax+spandsp and iaxmodem+hylafax. - what's the differences between these two? - which one's better? why? thanks

I'm using IAXmodem and Hylafax with 'faxdetect=incoming' and things mostly work pretty well. My main lines come in via T1 DID. Today, HR got tired of having someone read and forward their faxes to them and requested we bring their physical machine back on line. I have been able to get the fax forwarded to the appropriate zap channel, but I cannot seem to get it to stop

Hi guys I have a lovely little irritation on my hands. I?ve been trying to set up DID-based routing in Hylafax, and I?ve come across one hell of a headache:

Hi, I thought I'd check in with people here. Lets say I wanted to put together a Hylafax server, and an Asterisk server on the same box. And, for the sake of making things simple, I wanted to use a single T1 board for both.... Is this possible? I see Eicon boards are supported by both software, so could I have Hylafax and Asterisk installed on a server with an Eicon card, with channels

Hi all, I'm installing Hylafax on my Asterisk system. From what I've read, I can either use IAXModem or T38Modem to provide the virtual fax device. So at the risk of starting a religious war, which one should I use? I don't mind running IAX if I have to. I want as much flexibility and stability as I can get. So, what are your recommendations? Mike. -------------- next part