similar to: SIP/IAX2 Phones behind USR 9108 Router

The patch adding the iommu lock did not initialize it. The struct is zero-initialized so this is mostly a problem when using lockdep. Reported-by: kernel test robot <rong.a.chen at intel.com> Cc: Max Gurtovoy <maxg at mellanox.com> Fixes: 0ea9ee430e74 ("vdpasim: protect concurrent access to iommu iotlb") Signed-off-by: Michael S. Tsirkin <mst at redhat.com> ---

From: Max Gurtovoy <maxg at mellanox.com> Iommu iotlb can be accessed by different cores for performing IO using multiple virt queues. Add a spinlock to synchronize iotlb accesses. This could be easily reproduced when using more than 1 pktgen threads to inject traffic to vdpa simulator. Fixes: 2c53d0f64c06f("vdpasim: vDPA device simulator") Cc: stable at vger.kernel.org

Hi, Greetings to All, Im looking for some help on configuring VPN on the Asterisk PBX that I have hosted in US. Im currently in Middle East and as everyone knows some countries here has taboo to VOIP. Im not able to get phy phones registered to my PBX as they are blocking SIP and IAX2. Hence im looking for a VPN solution. For this first i need to setup VPN on my server .. Am i right? Well if

On 8 Oct 2010, at 15:37, Danny Nicholas wrote: > -----Original Message----- > From: asterisk-users-bounces at lists.digium.com > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Tim Panton > Sent: Friday, October 08, 2010 9:34 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [asterisk-users] Weird stalling of playback on IAX2 channels

the code is list below , i can run this code for laplace approximation but not importance sampling. the code work properly if use impSamp=0 , but error for any other number >0 . could you guys help me out. thanks so much ! source("http://www.mi.uib.no/~skaug/cash/lesaffre_dat.s") library(glmmADMB) fit_glmmADMB_ip <-

Hi here, i recently notice the software built by otter company know as AD-MB tools . i explore a little bit this tools under the R Package for mixed logistics model. it is a very interesting tool. but i get several questions. first question: i tried the R code below, and have the error , i can run the code for switching the setting to impSamp=0 , it means i can only run the code under

Trying to get Xen working with Gluster. I understand you need --disable-direct-io-mode, however that cuts my disk I/O from 130 MB/s to only 22 MB/s. Also when I try to use xen with tap:aio, but only get to Creating root device. Red Hat nash version 5.1.19.6 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating

Hi, can I use an external modem such as Usr or other une attached at ttyS0 port on my linux box whith asterisk for routing incoming and outgoing calls?

And my last post on the matter. This is why I won't do business with USR again anytime soon. They couldn't even be bothered to tell me this on my first query to them. Eric Hines >X-Originating-IP: [63.169.70.144] >Date: Tue, 20 Dec 2005 18:44:48 -0500 >From: usr_amr_eng@aqinc.com >Subject: In response to your USRobotics technical support questions, >your case

I rebuilt rkhunter-1.2.8-1.noarch.rpm by using the spec and tgz from the rkhunter site (www.rootkit.nl). (I rebuilt it using his instructions.) However rkhunter does not do an md5 check. The box used to have fedora and each time there were updates it would complain that the some of the md5's don't match. I contacted the author using his contact feature on Wednesday but he hasn't

Hello, I am new to mongrel. I have mongrel running on a linux machine (Fedora core), which sits behind a broadband router. The linux machine has the typical 192.168... internal IP address. We use the dynamicdns to connect to the linux machine from outside world. Now, my question is how can myself and my colleagues connect to mongrel from outside world. I tried starting mongrel with the -a

i apologize if this has been asked before, but things are too busy to preclude a full search of the list. i have both cable and dsl from the local providers here. due to wiring issues here, i''ve been forced to put the cable modem in one end of the house and the dsl modem in the other. the cable modem is firewalled off by a cisco pix 501 (192.168.2.12). the dsl modem is firewalled off

Dear Friends, I have been using shorewall for some years. I want to set up "shorewall 2" router behind firewall, accordind to this picture: I have lost at setuping "zone"-s (wifi, lan1, net). Plese help me ! Thanks, psw net | | SHOREWALL 1 ------- lan 1 | | |wifi | | SHOREWALL 2 ------- lan 2 | ---------------- lan 3

Dear Tom, Very, very thanks the quikly answer. It''s working. I made mistake on shorewall2 here, i wrote "wifi" zone to "eth0" /etc/shorewall/interfaces: net eth0 192.168.2.255 <---------- lan2 eth1 192.168.3.255 lan3 eth2 192.168.4.255 and don''t kept my mind the order in zone file. Thanks Tom Psw

I work at home with standard residential cable Internet service and I wanted to test CPA for use with our dialer solution. The first problem I ran into is that CPA only works with a SIP provider that does IP based authentication opposed to usename/password authentication. After I got an account setup to solve that problem I thought I was on my way to being able to test. No so. I got asterisk

Has anyone successfully configured an Asterisk box which is behind a (NAT) router for Sipgate? I have mine behind a Linksys router and can successfully register and apparently call out but I get no incoming audio and can't be called from the outside. Any help would be greatly appreciated. Roger -------------- next part -------------- An HTML attachment was scrubbed... URL:

The X-lite client is installed behind an ADSL router and it seems the ISP also has a firewall supposedly protecting their ADSL customers blocking some netbios ports and non-critical. I can't make outbound calls but I can receive but before then I had to use the following in the account section in SIP.conf [2222] ... type=friend secret=xxxx host=dynamic ;dtmfmode=inband ;

Dear all, Has anyone seen this before and can suggest a solution? I've got 3 sip clients behind the router, and they all register with Asterisk using the same IP address. Now, wenn all are registered, all the calls get routed to the client that registered most recently, but not to the correct client. Also, there seems to be some problems registering all 3 clients simultaneously. Could

Hello, I'm still looking for any ideas on this problem: I've got 3 sip clients behind the router, and they all register with Asterisk using the same IP address. Now, wenn all are registered, all the calls get routed to the client that registered most recently, but not to the correct client. Also, there seems to be some problems registering all 3 clients simultaneously. I have

Hi All! Im doing some test of icecast and it works greatly. its a dream!! But i need help with some stuff.. I have a LAN on my computer to connect the web and i have made a virtual server on the router to direct incoming calls to icecast. On icecast configuration I ve made icecast to listnen to the LAN IP adress of my router virtual server . That is ok for static files, but when i try to connect