similar to: Monitor recording losing sync

I have a weird problem.... Asterisk 1.4 E100P connected to a Panasonic TDA phone system Here is what I get SIP Ext -> Panasonic Extensions No Problems Panasonic Ext -> SIP Extensions No Problems SIP Ext -> VOIP Provider No Problems Panasonic Ext -> VOIP Provider Errors ---------- Working SIP -> VOIP -- Executing [903........@from-sip:1]

I did a NoOp and see what the callerid was and when coming from the SIP Ext->Voip it is set to the Extension Number of the SIP Extension (as you would expect). When coming from the Panasonic the CallerID is blank, I tried setting it to nothing again, and I tried setting it to the callerid of the voip provider, a sip extension id, the extension number on the Panasonic side, the zap channel

I have a weird problem.... Asterisk 1.4 E100P connected to a Panasonic TDA phone system Here is what I get SIP Ext -> Panasonic Ext No Problems Panasonic Ext -> SIP Ext No Problems SIP Ext -> VOIP Provider No Problems Panasonic Ext -> VOIP Provider Errors ---------- Working SIP -> VOIP -- Executing [903........@from-sip:1] Dial("SIP/610-097aee60",

Hi Folks, I've been playing with call recording for our support department which was kinda going ok until I spotted something odd in the CDR. None of the support calls are being entered into the CDR properly. I'm using mysql as the back end and Areski's web based front end and all was going fine. The problem seems to be that the CDR doesn't get populated with the destination

I'm trying to set on-demand call recording. Here's a snippet of the pertinent dialplan. The purpose of this is to allow one user in particular to be able to receive an email recording of the call everytime he dials *91 + number. The problem is that the email is not going out or being generated when I use the ${CALLFILENAME} variable. When I use the actual file name of the gsm recording,

This is what I'm doing it gets you both sides of the phone call...small size...and playable on windows through a share. My notes: On redhat 9 I have to run the following command for asterisk to start LD_ASSUME_KERNEL=2.4.1 asterisk -vvvvgc [macro-record-on] exten => s,1,SetVar(CALLFILENAME=${TIMESTAMP}-${ARG2}-${ARG1}) exten => s,2,Monitor(wav,${CALLFILENAME}) ;exten =>

Thanks for the answer Matthew. > > > > I'm having high load, choppy sound and slow responsives with an > > asterisk server (version 1.2.12.1) that make a peak of 90 channels > > (around 60 phones calling at max, isn't necessary to reach this peak > > to get the problem). All the traffic is SIP, with recording for every > > call. > > > What

[apologies for no line wrap; config lines at bottom] I have mentioned on several threads here that the Monitor application doesn't do exactly what one would expect: the originating and answering legs of a call are unsynchronized by the duration of the interval that it takes for the answering leg to pick up the phone. This can be very distracting in a final mixed version of the file. Brian

Hi all, I'm trying to make a context that will monitor a call and when it's completed it would e-mail the wav to a specified mail adres. So I made a standard context that records a call, like this: exten => _*31*00[1-9].,1,Setvar(CALLFILENAME=CALL-${EXTEN:4}-$ {TIMESTAMP}) exten => _*31*00[1-9].,2,Monitor(wav,${CALLFILENAME},m}) exten =>

I am trying to record a call into a stereo mp3 in Asterisk 1.4, but I can't seem to get it to work correct. Could someone point me to what I need to do? I have attached what I believe are the relevant parts. [globals] ; script to be executed when monitoring has been finished MONITOR_EXEC=/usr/local/bin/2wav2mp3 ; uncomment this line if you are using Ogg Vorbis

I have setup as per the monitor example configuration on the wiki site and all works well for an extension dialing 8 then the number. However, if I dial from an AGI script the recording stops after a few seconds. I see an extra answer in the console and suspect that is the reason. Could any kind soul help me to get around this? Extensions.conf.. exten =>

Hello! I'm using Asterisk for our office telephony, but we have some problems that still we can't resolve about it. Here they are: 1) merge in/out call recording files I also tried to use a script I found on the internet, called 2wav2mp3 In extensions.conf I added the following lines ; script to be executed when monitoring has been finished MONITOR_EXEC=/usr/local/bin/2wav2mp3 exten

We are using the following to record conversations. exten => _1XXX.,1,SetVar(CALLFILENAME=call_to_${EXTEN:1}_dated_${TIMESTAMP}) exten => _1XXX.,2,Monitor(wav,${CALLFILENAME},m) exten => _1XXX.,3,Dial(IAX2/4506:zj5S3A5a@nl.voipgate.nl/${EXTEN:1}) exten => _1XXX.,4,Congestion exten => _1XXX.,104,Congestion This was working previously to record both sides of the conversation but now

I am using asterisk along with freepbx . When recording is enabled for a extension the call record file made in /var/spool/asterisk/monitor contains information like OUT(extension number)-(timestamp)-(uniqueid).wav . This can be a big mess if there are more than 1000-2000 files in that folder and very hard to locate a call recording based on call time and extension number who dialled. I need to

Whens the point and click GUI coming out? All kidding aside, I seem to be confused about some of the network settings. Essentially all I want is a secure tunnel from machine A to B on two different physical networks, but I can't seem to get there. Just to get things figured out I've got two machines on the same physical network, mach A: 192.168.0.1, mach B: 192.168.0.3. bcast is

On this macro I keep getting exited non-zero on s,3, but s,3 is doing what it is suppose to do but the macro stops. Is there a way to make a macro ignore errors and continue to s,4? I have the lattes ver of sox 12.17.4. Also if I just run this line from the command line I don't get an error. [root@redhat monitor]# sox in.wav in-rev.wav reverse [root@redhat monitor]# [macro-record-cleanup]

I have Asterisk 1.2.29, Zaptel 1.2.24 and Freepbx Setup for a queue up to 15 agents through a PRI line, it was working fine for more than 1 year, suddenly, when there is a load on the queue, the asterisk service disconnects and the calls are dropped. And the service starts again after few seconds, and so on. I am not using fax. I checked PRI by zttool and there are no alarms. The cdr logs

Hi, I am having difficulty getting my record phone call dial-plan script working. I have tried the example record call scripts but they start recording before they are actually connected to an end point, e.g. you get ringing or announcements being recorded. It seems to me that these are bugs with the Dial() command: 1) Using M(x) in a dial command does not allow argument to be passed. Using

I currently have my Asterisk set up to "monitor" (record) all audio in my conference room on meetme. However, Asterisk will record an "____in.wav" and "_____out.wav" file for each user that joins the conference. Is there a way to set my extensions.conf file up so it only records when user when extension 1234 calls, for example? I'm assuming that the

1. RE: Start recording automatically when xferring to anextension? (Don Pobanz) Message: 1 Date: Fri, 25 May 2007 11:54:33 -0500 From: "Don Pobanz" <dpobanz@hastingsutilities.com> Subject: RE: [asterisk-users] Start recording automatically when xferring to anextension? To: "Asterisk Users Mailing List - Non-Commercial Discussion"