similar to: IAX-configuration

Hi, Could you help me? i have a problem with file on disperse volume. When i try to read this from mount point i recieve error, # md5sum /mnt/glfs/vmfs/slake-test-bck-m1-d1.qcow2 md5sum: /mnt/glfs/vmfs/slake-test-bck-m1-d1.qcow2: Input/output error Configuration and status of volume is: # gluster volume info vol1 Volume Name: vol1 Type: Disperse Volume ID:

I was wondering if anyone had seen this problem before and/or could offer any insight into what the trouble might be: I have an Asterisk machine that it set up as a mutual friend with another one (in another state... about 150ms away). Calls between the two fail to get established approximately 50% of the time. When a call works, everything is fine. When one fails, however, I see a large

Hi All, I am using Asterisk 1.4.26.2 and I am getting the following problem making connections to this server. My other servers are Version 1.2.x which have no problems and this 1.4.26.2 server can call the other 1.2.x servers. The error is: chan_iax2.c:4251 handle_call_token: Call rejected, CallToken Support required. If unexpected, resolve by placing address 192.168.25.250 in the

Hi, I'm testing an upgrade from 1.4.18 to 1.4.37 in a VM prior to putting it into production. Ive done this by installing 1.4.18 onto the VM, putting my config files in place and then installing 1.4.37 over the top (which is what I'd have to do on production). I've found a few issues in the config files, but nothing I couldn't handle until... I hit inbound IAX issues. My

All, Has anyone seen INVAL messages on an IAX link before? I'm occasionally getting them from my Gateway provider, and I need to narrow down the potential cause. Symptoms are: Incoming calls fail, I see NEW, AUTHREQ then INVAL messages between the two A*k boxes... then for no reason at all it'll start working ok again.. My Asterisik: 1.2.10, Gateway A*k : 1.2.0

Hi people, i have problem with IAX2 between two asterisk PBX. When i try call some number i get "INVAL" packet, but when i try call same number via OpenVPN (is between this two asterisk) call is working fine.So i debug communications and here is my opinion ... Schema of connection: Asterisk1 -> ADSL router with NAT -> INTERNET -> Asterisk2 A)Calling directly via public

Hi all On the Asterisk website in the blog its announced that in a next release Asterisk would support dynamic DUNDi weitht values. I've installed Asterisk 1.4.4 (via aptitude install) but this doesn't seem to work. Has somebody some experience with this or know whether this feature is already implemented or not? Thanks! Andre -------------- next part -------------- An HTML attachment

I'm having some trouble with placing some iax calls over an openvpn: Setup A is a 1.8GHz Celeron, T100P attached to a Zhone Zplex. Setup B is a 266MHz P2, T100P attached to a Zhone Zplex. Setup C is a 700MHz P3, T100P attached to an Adtran TA 750. Setup D is a 233MHz Pentium, with an X100P. Setups A and B are on the same physical network. IAX calls routed between them work fine. Setup D is

I am having some problems getting TelIax service to work with *. Outbound calls work just fine. When I try an inbound call the phone rings and there is no audio. Upon further investigation "iax2 show channels" indicates that the codec is "unknown" The provider confirmed that they are set for ulaw and so am I. Does anyone have an idea what could be causing the codecs to

Hi all On the Asterisk website in the blog its announced that in a next release Asterisk would support dynamic DUNDi weitht values. I've installed Asterisk 1.4.4 (via aptitude install) but this doesn't seem to work. Has somebody some experience with this or know whether this feature is already implemented or not? Thanks! Andre -------------- next part -------------- An HTML attachment

Hi, I'm using asterisk 1.2.7.1 and somehow my iax trunking is getting these problem :S. Sometimes iax acts weird and start to drop calls randomly and give these at the log: May 16 13:44:22 DEBUG[5264] chan_iax2.c: Immediately destroying 6, having received INVAL May 16 13:44:22 DEBUG[5264] chan_iax2.c: Immediately destroying 6, having received INVAL May 16 13:44:22 DEBUG[5264]

I had a working 1.0.9 asterisk installation and tried to get a Firefly IAX phone to register, but it was failing. I upgraded to asterisk 1.2.5 and the PBX is working fine, but the IAX phone still won't connect. Below is my iax.conf and the output from setting iax2 debug while the phone tries to connect. Could somebody please give me some pointers? This doesn't seem to be a normal

I think I''ve figured out the routing for multiple ISP''s and DNAT. For ths who might be interesed, I''ve uploaded some notes to: http://www.heronforge.net/redhat/node17.html Let me know of you see any errors or a better way... -- Stephen Carville <stephen@totalflood.com> Unix and Network Admin Nationwide Totalflood 6033 W. Century Blvd Los Angeles, CA 90045

libswfdec/swfdec_text_field.c | 288 ---------------------------------- libswfdec/swfdec_text_field.h | 14 - libswfdec/swfdec_text_field_movie.c | 297 +++++++++++++++++++++++++++++++++++- 3 files changed, 291 insertions(+), 308 deletions(-) New commits: commit 2e79c953066b7f6857e88e7efaaed4d8846e9609 Author: Pekka Lampila <pekka.lampila at iki.fi> Date: Wed Oct 17

Hi peeps, I've been struggling with DUNDi for a few days now and I can't seem to make call from Asterisk A to Asterisk B. If I do a "dundi show peers", it finds the other peer but I can't seem to make any calls. Can anybody help me out here. Here's the situation: Machine 1: Debian with Asterisk 1.4.4 --> 192.168.1.103 Machine 2: AsteriskNOW --> 192.168.1.69 The

I'm looking at finding a way for my Macro(dundi-dundi-test,${ENTEN}) when I dial out on the dundi-test network to return a +101 to my [dundi-test-out] context, if the number being dialed on the dundi-test network does not exist, then I will route the call out using my pstn or voip connection i have. I have a feeling it will have to be the switch => DUNDi/dundi-test that will have to return

libswfdec/swfdec_as_strings.c | 2 libswfdec/swfdec_text_field.c | 66 +++++++++++++++++++++++----- libswfdec/swfdec_text_field_movie.c | 5 +- libswfdec/swfdec_text_field_movie_as.c | 77 ++++++++++++++++++++++++++++++--- 4 files changed, 132 insertions(+), 18 deletions(-) New commits: commit a165608df6751cf46561b570db61ff309f5b7244 Author: Pekka Lampila

http://bugs.freedesktop.org/show_bug.cgi?id=13293 Summary: _cairo_pen_find_active_cw_vertex_index failed assertion Product: swfdec Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: library AssignedTo: swfdec at lists.freedesktop.org

Hi all, I'm new in asterisk and I got to set up a dundi config for my work. I have 2 PBX for the test, the two PBX are in the same local network PBX A : 192.168.199.23 PBX B : 192.168.199.21 my config files : (on PBX B , the config files on PBX A looks like it) /etc/asterisk/dundi.conf [general] bind=192.168.199.21 port=4520 cachetime=5 ttl=32 autokill=yes entityid=00:30:18:4C:33:53

I have three Asterisk boxes. Each has the following in dundi.conf: 180net => dundi_local,0,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx1,1,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx2,2,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial 180q => dundi_q_pbx3,3,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial My iax.conf on all three