similar to: fax2mail ann missing CallerID number

I'm trying to capture faxes on 1.6.1-beta4. AFAICT, app_fax is working OK. I'm then using fax2mail to send the fax. That wasn't working, so i posted for help using the System() cmd, since fax2mail did work from the command line. But now I realize it's fax2mail and mime-construct itself. I set up a fax-test context: [fax-test] exten=>666,1,NoOp( fax-test )

On 1.6.1-beta4: Trying to receive faxes over a pstn line. extensions.conf: [incoming-pstn-line] exten => fax,1,NoOp(Fax Detected) exten => fax,2,GoTo(incoming-fax,s,1) exten => fax,n,Hangup() ............ [incoming-fax] exten => s,1,Set(FAXFILE=/var/spool/asterisk/fax/${STRFTIME(${EPOCH},,%Y%m%d%H%M)}-0${CALLERIDNUM}) exten => s,2,ReceiveFAX(${FAXFILE}.tif) exten =>

Hi Guys, i am using the latest version of asterisk 1.4 (1.4.33.1), dahdi (2.3.0.1) and FFA (Applications: 1.4_1.2.0, Digium FAX Driver: 1.4_1.2.0). the issue i'm having is that i'm able to receive faxes from a website (that offer this service) but not able to receive from a regular fax machine (that is working perfect). [fax-rx] exten => receive,1,NoOp(**** FAX RECEIVE ****) exten

Hello. Just installed the Beronet BN4S0 card. But i can't connect to my ISDN Line. misdnportinfo gives (what does ":Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib" mean?): best regards and thanks t. asterix asterisk # misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) -> Protocol: DSS1 (Euro ISDN) -> Layer 4 protocol 0x04000001

Hello. I have problems to integrate an isdn phone. I don't know why but the isdn phone rings only once and than it looses its connection to his base station. I can make a call from the isdn phone to an VoIP Phone inside my network but when i pick up the phone the isdn phone also crashes. misdn.conf: [ntport1] ports=5 context=isdn-telefon msns=* extensions.conf: exten =>

Hello. Someone knows what cause 127 mean. The phone that i'm calling rings once and than the connection interrupts: P[ 5] --> l3id:10040 P[ 5] --> cause:127 P[ 5] --> out_cause:127 P[ 5] --> state:ALERTING P[ 5] --> Channel: mISDN/5-1 hanguped new state:CLEANING P[ 5] $$$ CLEANUP CALLED pid:3 best regards -- Thomas Stein knowledgeTools? ....damit Sie sehen, was Sie

Hi. Asterisk 1.4.12.1. I get a lot of message like this. Someone knows what this message mean? Do i have to worry about it? [Nov 7 15:24:25] NOTICE[31145]: cdr.c:434 ast_cdr_free: CDR on channel 'Local/152 at local-f137,1' not posted [Nov 7 15:24:25] NOTICE[31145]: cdr.c:434 ast_cdr_free: CDR on channel 'Agent/152' not posted [Nov 7 15:24:25] NOTICE[31247]: cdr.c:434

Using 1.6 on Fedora Core 9 I'm trying to receive faxes. I've got this far: [incoming-fax] exten => s,1,Set(FAXFILE=/var/spool/asterisk/fax/${STRFTIME(${EPOCH},,%Y%m%d%H%M)}-0${CALLERIDNUM}) exten => s,2,ReceiveFAX(${FAXFILE}.tif) exten => s,3,Hangup() exten=>h,1,System(/usr/local/bin/fax2mail --cid-number "0${CALLERIDNUM}" --cid-name "home fax"

Hello. Is it possible to "mix" musiconhold music and playback voices? What i want to do is something like this: A person calls a number, gets a playback voice while in background music is playing. The configuration i use at the moment don't do what i want. Someone knows how to do it? Thanks in advance. exten => 18,1,Answer exten => 18,n,Background() exten =>

Hi all, I am running to the following problem, when using the below dialplan to receive fax, everything works perfect till this line exten => receive,n,ReceiveFAX(${FAXFILE}): and then the following line cannot be executed, it's like asterisk can't go back to dialplan and continue, the good news is when i check what is received in my fax folder i find that the file is a valid one (not

Hello. Is it possible to change the defined moh sound file within an extension? I have: exten => 18,1,Answer exten => 18,n,Wait(3) exten => 18,n,SetMusicOnHold(durchwahl) exten => 18,n,Dial(SIP/118,15,m) exten => 18,n,Hangup Now i have the situation someone calls and my phone is ringing while moh (durchwahl) is playing. When i pickup the call and press the hold button during

We have two asterisk back to back connected over PRI T1 and i am testing FAX over T1 line. Its working fine and i am getting fax file as well but i got "WARNING T.30 ECM carrier not found" is it safe to ignore this WARNING ? spandsp-0.0.6pre18 Asterisk-1.8.3.3 [from-pstn] ;Fax testing exten => 8000,1,Set(FAXFILE=/var/spool/asterisk/fax/${CALLERID(num).tif) exten =>

Hi, I succesfully install spandsp chan_misdn and digium card. the rxfax works fine and I get the fax result by email. I would like to do the same using a Patton gw + zaptel but I can't receive fax anymore, the call comes in from ISDN in the Patton gw, patton sends it to asterisk, asterisk run a macro to make a tif file using rxfax, the tif file is correctly created but with a 0 size the call

Hello, All. I have a problem with receiving fax through T.30. I'm calling 543 number from fax machine, then start sending fax and fax machine send document without problem. But asterisk don't receive fax. I can't find good documentation for app_fax and I'am googled this errors. Please help me. software: asterisk-1.6.2 OS: ALT Linux 5.0.1 Ark Server hardware: Digium Wildcard

Hello, Is there or can anyone provide a comprehensive guide (designed for Linux/Asterisk novices) to installing/setting up Asterisk in order to support Fax2Mail service? In my case, I would like Asterisk to receive fax calls to predefined numbers (ranges) and to associate each of these numbers to email addresses. Thank you in advance. David --------------------------------- Yahoo!

Hello, I have a noticed strange behavior in Asterisk 1.6.18.2 with ReceiveFax Digium FAX Driver: 1.6.2.0_1.3.0 (optimized for i686_32). I use a context [capi-in] for icoming ISDN calls: ====== [capi-in] ; Faxe fuer Ruben exten => 12345,1,Macro(faxin,ruben.roegels at jumping-frog.org,${EXTEN}) ====== My macro for the fax receiving looks like that: ====== [macro-faxin] ; Faxe ; ARG1 =

I have installed the libtiff(3.5.7),spandsp-0.0.2pre24,app_txfax and app_rxfax,asterisk-1.2.12.1 on the CentOS 4.2. I set sip.conf like this: [sip_local] host=192.168.2.111 type=friend dtmfmode=rfc2833 canreinvite=no insecure=very I set extensions.conf like this: [test] exten=>_9001XXXX,1,Set(CALLERID=${EXTEN}) exten=>_9001XXXX,n,dial(SIP/${EXTEN}@sip_local)

Hello. I have a strange problem. Its not possible to pickup a call that was placed with a Siemens SL75 Wlan. When this phone calls an internal number and i try to pickup (*8) the call from my phone i get nothing. It seems i have the call for one second or so but after that the call is being cancelled. No problems with other phones (polycom, grandstream). Attached the complete sip debug log

How should be the macro rewritten? [macro-faxreceive] exten => s,1,Set(FAXFILE=/var/spool/asterisk-fax/${UNIQUEID}.tif) exten => s,2,DBGet(EMAILADDR=extensionemail/${MACRO_EXTEN}) exten => s,3,rxfax(${FAXFILE}) exten => s,103,Set(EMAILADDR=ronald@elmit.com) exten => s,104,Goto(3) ... [Jan 23 10:43:38] -- Executing Macro("Zap/3-1", "faxreceive") in new

Hi, I'm fighting with HylaFAX, Asterisk and T38Modem since some time, to get fax2mail and mail2fax working, my SIP-provider only supports T38 and thus using G711 with IAXModem is not an option. I have got running mail2fax with HylaFAX+ 5.5.0, Asterisk 1.4.20 and T38Modem 2.0.0 successfull, but I'm not able to upgrade to anything newer than Asterisk 1.4.24. I was able to break down this