similar to: TE205P, E1, Panasonic PBX and hang-up issues

Hi folks, After a fairly extensive Google trawl, I don't think the following is possible but would appreciate confirmation from anyone else who has tried something similar. I have an AGI (not particularly relevant) which is executed when someone calls into a specific extension. This AGI finds a suitable 'agent' (not actually a queuing system in the Asterisk Queue sense) and Dial()s

Hello, everyone. I'm having a strange problem with my asterisk. After dialing and before the other side picks up the phone I should hear the tones (I'm not sure what are they called: piiiiiiiiiiii---piiiiiiiiiiiiii....) and in almost all cases that is true. However there is a range of numbers where I'm having this problem. There is no tones, just silence, until someone picks up the

Hi ..., I've a TE205P card installed in my asterisk box.Port 1 of my card is connected to service provider.From port 2 I want to connect Avay Partner system. what type of cable I require to connect the partner system (straight/cross over). How the call routing from outside will be done to epbx. Thanks inadvance regards rudra -------------- next part -------------- An HTML attachment

Trying to find my feet here. If I wanted to connect Asterisk to a PRI and throw in a T1 Adtran channel bank into the mix for fax machines would the following work? Connect PRI line from telco to Port 1 on the Digium Wildcard TE205P. Connect Adtran TA-624-T1 to Post 2 on the Digium Wildcard TE205P also, would I need a crossover to the channelbank or is it a patch lead like the connection to the

Hi all, I've setup a PBX in production environment last week but we have immediatly find out drop conversations and lot of errors (in asterisk logs) like: Apr 10 17:30:48 NOTICE[25154] chan_zap.c: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2 My configuration is: Motherboard: SuperMicro P8SCT (Intel E7221 chipset) Hypertrading and APIC enabled CPU: P4 3GHz Digium TE205P

Hi i have a PRI connected to a TE205P. Actually, can i send and receive FAX through Asterisk using stable solutions? Or shall i connect an ATA to Asterisk and then a modem with Hylafax? -- /*************/ nik600 https://sourceforge.net/projects/ccmanager https://sourceforge.net/projects/nikstresser

Hi, I am having problems with an Asterisk with a Digium TE205P card. The issue is that the Ring Back Tone is noisy. I am making modem's calls and this noise influences on the initial negotiation protocol, so modems have to recall. My configuration is: Asterisk version: Asterisk 1.4.21.2 Linux version: CentOS release 5.2 (Final) Card: Digium TE205P

If Someone did that, How I connect extensions.conf with this type of Hybrid system to work with asterisk inside this schema: PSTN--->PANASONIC KX <------> Asterisk | |--------->send internal call Thanks.

Hi, Anybody have an idea how to integrate * with a Panasonic td-1232? We one at the main office, and are installing * in a branch office. We'd like to be able to make calls from * extensions to Panasonic extensions and the other way around. Making outgoing calls from extensions one one side to lines on the other would be nice too. I can put another * machine at the main office, but what is

hi i'm trying to configure a TE205P on asterisk@home i've edited /etc/sysconfig/zaptel adding this line: MODULES="$MODULES wct2xxp" now, when the system is loading, i can see that the wct2xxp module is loaded correctly but if i try the command: /usr/local/sbin/genzaptelconf i get: STOPPING ASTERISK STOPPING FOP SERVER Generating '/etc/zaptel.conf' Generating

Hi guys, Currently I just purchased the TE205P for the installation of my ISDN30 setup. I compiled, setup the card correctly I think. When I do the ztcfg -vvv it shows all 31 channels clear, with 30 bchannels using for voice ranging from 1-15, 17-31, and 16 is the dchannel. However, when I do a cat /proc/zaptel/1 I see only 24 channels configured, and then, when I do a cat /proc/zaptel/2 I see

I have a TE205P, jumpered for E1, added the missing wct4xxp-line to /etc/modprobe.d/zaptel, zaptel.conf is just span=1,1,0,ccs,hdb3,crc4,yellow span=2,2,0,ccs,hdb3,crc4,yellow bchan=1-15 dchan=16 bchan=17-31 bchan=32-46 dchan=47 bchan=48-62 Which, according to my reading of the documentation I could find, should be correct. ztcfg doesn't complain about anything, yet all I ever get is RED

Hello, I am working on a project and have a few questions. I want to connect one port of the TE205p to the PSTN, and another port to the PRI port of a PBX. Basically Asterisk will sit between the PSTN and the existing PBX. Are there any gotcha's I need to be aware of? Will the existing PBX be able to dial through asterisk as if it was a PSTN connection? -- Isaac McDonald Got VoIP? imcdona

Im a 3-days-asterisk-newbie. In 3 weeks, I must have a PBX installed in a new office of ours: Panasonic or Asterisk. Asterisk would be, if I can emulate some Panasonic functions on Asterisk fast, to convince the executives. What I have done until now: Bought 1 Linksys pap2 (2 FXS), 1 Linksys SPA3102 (1 FXS + 1 FXO) for making asterisk tests. Configured Asterisk/Fedora 9 so I can make SIP->PSTN

We have a setup running Asterisk interconnected to a Panasonic TDA200. The Asterisk server has a two port E1 card, one connected to the phone company and the other to the Panasonic. Everything is running fine and we can send and receive calls from the Panasonic and phone company. We are using MFC/R2 for both links on Asterisk 1.4.4 and Zaptel 1.4.3. The only detail we have is that we cannot

Hi all, I have an existing panasonic analog pbx in use and a asterisk server with digium tdm400p(2 fxs and 2 fxo). channel 1 -> fxs -> telephone channel 2 -> fxs -> telephone channel 3 -> fxo -> extension 15 at panasonic pbx channel 4 -> fxo -> phone line from telco We call in to fxo (channel 4) and enter the ivr which prompt us to enter the extension number. After

Panasonic PBX KX-TDA600 it doesn't support SIP protocol for VoIP technology it only support H323 Trunk through 4 or 16 channels gateway card and TDM technology with ISDN BRI and PRI card. Mc GRATH Ricardo

hi everyone, Is it possible to serially connect my panasonic KX-TD1232 with a Linux box(Asterisk installed) and have it working? -- P. K. kakarizz@fastmail.fm

The place I currently work at has a Panasonic Key system with 9 extensions, and no voicemail. It services 2 PSTN lines. I am hoping to use Asterisk to host voicemail (I would like to use the IVR also, but I don't even know if or how it would work). Do I need to use a PRI between the two, or is there a simple solution? I would like people to be able to answer the phone and