similar to: Asterisk as SIP Provider

Looks like the PlatformToolsets are cached in the .suo file. If you move it out of the way or delete it, VS will re-scan for toolsets. I'm not sure what other user state is stored there, though. That's annoying. =/ On Tue, Dec 3, 2013 at 6:37 AM, Kelly Sommers <kell.sommers at gmail.com>wrote: > Thanks for the reply Reid! I took a look at that script and found that the >

Has anyone had good results with an on-line database that returns a LATA based on NPA NXX? --Don Don Kelly PCF Corp People Come First 651 842-1000 888 Don Kell(y) 651 842-1001 fax -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100518/d77d09b3/attachment.htm

I am attempting to establish SIP peering between Asterisk and an AltiGen soft PBX. This is my first experience with SIP peering. I can successfully make both inbound and outbound calls to/from a softphone on the AltiGen system (network access is provided by a PRI on the Asterisk system), but they are disconnected unexpectedly. The attachment is a redirect of the Asterisk CLI during a call that

Told you it was too complex of an issue :-) I figured to do this in zapata.conf and all is fine now: transfer=no That was the magic two letter which was sending a request for RLT feature on the line. Set transfer to "no" and all worries gone. Thanks for the input everyone. -Bruce On Mon, Apr 12, 2010 at 10:10 PM, bruce bruce <bruceb444 at gmail.com> wrote: > Futher check

I'm looking for a way to use our implementation of HylaFax on Asterisk with Cardiff (an old installation of Cardiff document stuff). Is someone doing that? If no one has direct experience, is there a HylaFax client that emulates WinFax print-to-fax? --Don Don Kelly PCF Corp People Come First 651 842-1000 888 Don Kell(y) 651 842-1001 fax -------------- next part -------------- An

I have recently updated from Centos/*1.2 to Ubuntu Server and FreePBX 2.8.0.2. We have an Astribank with 4 T1 ports and 16 FXS ports. After updating, we had it working for a while with one NT PRI and one TE PRI and, in the process of trying to configure another PRI, I ran into a couple problems. (1) As my configuration changes didn't seem to affect the Astribank, I power-cycled it. I

pls read the page of http://llvm.org/builds/ : To use the LLVM toolchain from Visual Studio, select a project in Solution Explorer, open its Property Page (Alt+F7 by default), and in the "General" section of "Configuration Properties" change "Platform Toolset" to "LLVM-vs2010" or "LLVM-vs2012". Alternatively, invoke MSBuild with

Thanks for the reply Reid! I took a look at that script and found that the files were properly copied so I poked around some more. I found that if I started a new win32 console application, LLVM shows up in the toolchain drop down! But if I open another project file from an existing project to see if it compiles in LLVM the dropdown options are missing! Do you know what might be deciding when

Getting the platform toolsets installed in the right place is a dirty job handled by this script: http://llvm.org/viewvc/llvm-project/llvm/trunk/tools/msbuild/install.bat?view=markup Do you have a PlatformToolsets directory somewhere under ProgFiles/MSBuild? If so, where is it? We can add it to the path search. If anyone has better ideas on how to find this magical directory, suggestions are

I'm trying to use a GXW-4008 for the first time to provide simple POTS. Is anyone using it? How about samples of SIP.CONF and EXTENSIONS.CONF? Do you have advice for configuring the GXW-400x for this application? How long a local loop will it support on the FXS ports? When I started to configure the unit, I was able to connect via the WAN port. Now I'm unable to connect to

I've been working with a telco for the past two days trying to get a PRI span up and running. This is a small-ish telco and I get the feeling they don't do this very often. Anyway, they specified a pretty standard setup: ni2 switchtype, esf framing, b8zs coding, etc. All of my b-channels are up, but we're having a heck of a time getting the d-channel to come up. He finds out that

Thanks to David and Jorge - both of your helpful suggestions got me to the desired endpoint. In case anyone else has this question: I boxplotted my y variable data, but did the "cut" operation on the x variable in order to conserve the order of the y data. I see another suggestion coming in from another user that basically says this. So, my working line of code was: boxplot(count$RPKM

This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_000_01C3738F.63DE3390 Content-Type: text/plain; charset="iso-8859-1" #I want to be able to create a new S4 class and read data into it using C code # Here is a very simple S4 object inheriting from "array", but with 5

This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_000_01C39C9F.B5DABBD0 Content-Type: text/plain; charset="iso-8859-1" # Your mailer is set to "none" (default on Windows), # hence we cannot send the bug report directly from R. # Please copy the bug report (after finishing

I have a wired problem, i can recive call but i can't make any call. ATT say that is my problema because the call is operator mode (???) The log is MFC/R2 Chan 1: Call control(1) MFC/R2 Chan 1: Make call MFC/R2 Chan 1: Making a new call with CRN 32772 MFC/R2 Chan 1: 0001 -> [1/ 1/Idle /Idle ] Chan 1: -- Dialing on channel 0 Chan 1: -- Dialing on

Hi list: I want to modify the libmfcr2. But i can't find where is define the end DNIS signal is define. Actually the libmfcr2 send a ONE (1) at the end of sending all the DNIS numbers. I need to send a TWO (2), this becouse in Mexico the normal is to send a 2 at the end, not a ONE. In the next example i dialed un 6 19:12:17 WARNING[719] chan_unicall.c: MFC/R2 UniCall/5 Call control(1)

Thanks to both Weidong and David for the help! By implementing both of your suggestions I was able to make this work. I did end up putting header=TRUE for both read operations. --Kelly ________________________________________ From: David Winsemius [dwinsemius at comcast.net] Sent: Tuesday, August 30, 2011 1:16 PM To: Vining, Kelly Cc: Weidong Gu; r-help at r-project.org Subject: Re: [R] column

Hi, I've finally got running Asterisk 1.2.14 with UniCall & MFC/R2 patches, I can generate calls and all seems OK but I cannot receive any call, this is what I get: MFC/R2 UniCall/3 <- 0001 [1/IDLE /Idle /Idle ] MFC/R2 UniCall/3 Detected MFC/R2 UniCall/3 Creating a new call with CRN 32769 MFC/R2 UniCall/3 1101 -> [2/DETECTED/Seize ack/Seize ack ]

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I have a astunicall-1.4 setup with a te110p to a nortel pbx in Mexico. (Hate R2!). This is what I get when trying to call to * box using testcall: ./testcall Chan 31, class 'mfcr2', variant 'mx,20,4', end 0, caller 0, from '' to '' Loading protocol mfcr2 Thread for channel 0 MFC/R2 Chan 31: Call control(9) MFC/R2

Hi! Im having some troubles trying to configure * as a bridge between a telco and a pbx with R2, the scenario is this: ------------ E1/R2 --------- E1/R2 ------------ | Telco |-------------| * |-------------| PBX | | (Telmex) | --------- | | ------------ ------------ I can receive calls from the telco