similar to: GSM Cards for Asterisk (UK)

Hello, I am looking for a gsm gateway that is SIP based i.e no need of FXO/FXS analogue connection. I searched the email archives and found messages from 2008 but not sure how accurate these are. What do you use and how well it works ? The only sensible one I found is one made by portech and one that is made by Eurodesign. The one from portech is like a trunk while the one from eurodesign

Hi, I am experiencing a weird issue with my MV-372. Mobile1 & Mobile2 are both registered to my asterisk server, I am able to use them for outgoing call with no problem, but when I call the sims in my gateway, they are routed to the right context/extension/priority, but as soon as I hangup, the sim unregistered from asterisk and tries to register with my the callerid of the last incoming

Hi! Asterisk in Debian/Lenny claims to be bristuffed, not? At least the the Debian patch tracking system shows the bristuff-patches: [1] http://bit.ly/bRRHe7 We have a QuadBRI-Card and recently needed support from Junghanns.net but they refused telling us there is no bristuff installed because of the show version output: *CLI> show version Asterisk 1.4.21.2~dfsg-3+lenny1 built by pbuilder @

Hello, I am trying to install a Billion ISDN on Asterisk I have Debian Etch and I installed theese packages: apt-get install linux-headers-`uname -r` apt-get install make apt-get install ncurses-base ncurses-bin ncurses-term apt-get install libncurses5 libncurses5-dev apt-get install bison apt-get install openssl apt-get install libssl0.9.8 apt-get install libssl-dev apt-get install

Hi, I have a Portech MV-374 GSM Gateway and I'd like to send SMS from a web page to confirm the subscriptions. How can I achieve it? Is Asterisk of any use to send SMS with the Portech? I really have no idea because I know nothing about the whole SMS thing... Thanks, Niccol? -- http://www.linuxsystems.it

I'm using Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b - when anyone picks up a call with '*8' - the call will drop after about 20 or so seconds. Is this a general problem with Asterisk 1.0.2? As this is the latest release that it appears Klaus-Peter Junghanns has for public consumption - is there anything I can patch for just this problem - or has Klaus-Peter Junghanns (or anyone else) been

Hi, Reading from www.voip-info.org, i can see that "Junghann's chan_capi is now part of bristuff <http://www.voip-info.org/wiki/view/Bristuff> , as of version 0.3.0-pre". What does that really mean ? Shall I understand I can share a Junghanns QuadBRI board between 2 CAPI-enabled software (like a 0.3.0-pre bristuffed Asterisk for instance) ? If positive, what are the pros and

Hello, I recently bought a Junghanns Octobri Card. I have some problems with this card to make outbound calls but I can receive calls. I have 3 lines to PSTN and 3 lines to my existing PBX FRANCE TELECOM <-- OctoBRI --> Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1h <-- OctoBRI --> PABX e-Generis <----> ISDN Phones |

Kapejod is working on a fix for the CDR problem in bristuff. See below ----- Forwarded message from kpj@junghanns.net ----- Resent-From: tzafrir.cohen@xorcom.com Resent-Date: Fri, 10 Feb 2006 13:01:25 +0200 Resent-Message-ID: <20060210110125.GU16880@xorcom.com> Resent-To: tzafrir@cohens.org.il Envelope-to: tzafrir.cohen@xorcom.com Delivery-date: Fri, 10 Feb 2006 05:19:50 -0500 Date: Fri,

I've been asked to purchase a gsm gateway for use with our asterisk server (for our use, not reselling) I have a spare ISDN port on the server, so I have use either a PRI or VOIP gsm gateway. What would people recommend ? Has anyone used the QuesCom 400 ? I would also love to know a rough idea of cost ;) Once I've gotten the info, I'll post a message on the biz list for a

More than 60% of our outbound calls are now to mobiles, so the time has come to whack in a gsm channel bank. Does anyone have any preference of bank ? Do you use a PRI or VOIP connection from the bank to asterisk ? Real-world experiences are sooooo much better than marketing blurb ;) We currently have a TE412P with a free socket, so we have a choice either way. I am looking for up to 30

Hi, I'm using spandsp-0.0.3 [http://www.soft-switch.org/downloads/snapshots/spandsp/ spandsp-20061116.tar.gz] on a bristuffed asterisk (1.2.13) [http://212.91.251.199/~junghanns.net/downloads/bristuff-0.3.0- PRE-1v.tar.gz] libtiff is at version 3.6.0 Running on: Linux router2 2.6.17-2-686 #1 SMP Wed Sep 13 16:34:10 UTC 2006 i686 GNU/Linux Debian testing distro. I've tried many

Using the latest(?) bristuff (Asterisk 1.0.4-BRIstuffed-0.2.0-RC3a) I have problems with loosing the D-channel. Most of the time, after the message "PRI D-channel down" it only takes a second or so to come back up, noted by the message "PRI D-channel up" However, today most of the time the D-channel stays down. Calls come in, but can't be answered. Does anyone know

Hi, I would like to use Realtime extentions with a four bri card, the classic "quodbri". Normally with that card I would use * "bristuffed" from Klaus-Peter Junghanns, but since that package is based on stable version there is no Realtime at all in it (I suppose). Any idea, other than wait for realtime to begin stable ? :) Tnx ! -- Best regards, Alessio

Hi there, I just wanted to point out that Asterisk will be present at CeBit this year. We gathered some money from sponsors and were able to afford a booth together with a training-company. We'd be happy to find others joining us at the booth somewhere between 10th and 16th of March in Hannover, Germany :-) Kind regards ... -- Thilo R??ler Linup Front Pallaswiesenstrasse 203 64293

Ok, I usually use the latest stable CVS, with no patches or modifications. If figured if there was a worthwhile patch, Mark would have already included it. However, there was that neat patch about being able to press a certain key and it'd begin recording in mid-stream, that was an awesome feature and I patched my latest features.c file with that patch. But I keep seeing mentions of other

Hello I am trying to get Asterisk to work with the Junghanns Quad BRI ISDN card. I am progressing slowly! Problem I am now experiencing is as below. gcc -pipe -Wall -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -g -Iinclude -I../include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DZAPTEL_OPTIMIZATIONS -DASTERISK_VERSION=\"1.0.8-BRIstuffed-0.2.0-RC8h\"

Hello, I have a problem with the Bristuffed version of Asterisk. I have tried Bristuff-0.3.0-pre-1m,n,o,p (Asterisk 1.2.6 to 1.2.7.1) but they all have the same problem it seems: The setup: A machine with a single hfc-s PCI BRI adapter running Gentoo 2.6.15. Asterisk 1.2.0 (BRIstuffed-0.3.0-PRE-1) installed and working perfectly. Grandstream gxp-2000 as a SIP phone, and a normal mobile

Hi all, I have a strange problem, regarding zap channels and cdr. I am using asterisk bristuffed version Asterisk 1.2.2-BRIstuffed-0.3.0-PRE-1i, Copyright (C) 1999 - 2006 Digium, Inc. and others. with two billion ISDN cards. I also installed asterisk addons, last stable version via cvs internal calls, or calls starting from internal sip or iax phone are recorded in the cdr all without any

Hi, I'm getting unusable DTMF detection with DISA on incoming ZAP channel (bristuffed *) on quadbri from GSM gateway. DTMF detection works ok in normal ISDN incoming line. How can I check what's going on ? What settings to check ? Anyone with more experience on such scenarios ? Thanks in advance, regards, Rob.