similar to: Two Context Residing On The Same Server

I have followed all the install note for A2billing and have everything installed and configured and my asterisk works except the callingcard application. Added the following [callingcard] ; CallingCard application exten => 777,1,Answer exten => 777,2,Wait,2 exten => 777,3,DeadAGI,a2billing.php exten => 777,4,Wait,2 exten => 777,5,Hangup I am using 777 as the calling card

I am using Asterisk and A2billing Calling Card Platform and after the 6th call the quality starts to degrade. The way it set up is the user calls into the system then dial out so I have 12 channels being used up but 6 active calls. Here are my specs Asterisk SVN-branch-1.4-r79142 on a i686 running Linux Fedora 6, Pentium 4 Hyper-Threading, 64 bit, 1GB of RAM, 80 GB Sata Drive, bandwidth 4 Mbps

Hi I have this escenario: |SIP or H323 phone|---->|Cisco2600|----E1-pri---->|Asterisk|------>IVR, A2Billing, etc... The problem is that I can not hear any audio when call from 'sip or H323 phone' and configure something like: exten => _01XXXXXXX,1,Playback(thank-you-for-calling|noanswer) ... It works if I remove the 'noanswer' parameter but in this case it connects

Hello All, I manage to configure Asterisk RealTime and now it loads the SIP users/peers from MySQL DB. The table I am using is of A2Billing DB "cc_sip_buddies". Now the only problem I am facing is incoming calls are failing... The ATA which is assigned this DID number is behind NAT and according to Olle's explanations he said "*there's no support for NAT keep-alives

OOH323 Debugging Enabled -- Executing Answer("SIP/3513-090f7d40", "") in new stack -- Executing Wait("SIP/3513-090f7d40", "1") in new stack -- Executing DeadAGI("SIP/3513-090f7d40", "a2billing.php|1") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php a2billing.php|1: line:58 - IDCONFIG : 1

So, incoming calls on zap work just as I expect them - an intro is played, the caller hits 1 for sale 2 for support or dials an extension. I'm using the privacy option for all extensions. When calls come in from zap, they caller is played the priv-recordintro recording, they say their name, and everything happens normally from there on out. However, when the call comes in from sip and

Not sure if a2billing can be shared here, but ill give a shot If the credit < min_credit the IVR play: sorry you have 0 credit and hangup, I want it to FW me to the IVR to add voucher, please let me know: here is log: [18/10/2010 07:01:12]:[file:a2billing.php - line:75]:[CallerID:]:[CN:]:[IDCONFIG : 1] [18/10/2010 07:01:12]:[file:a2billing.php - line:76]:[CallerID:]:[CN:]:[MODE : standard]

Hi all, I am configuring asterisk as a prepaid calling card. I am getting different local rate from my ISDN provider e.g 0.002 for landline and 0.13 for mobile etc. In this case I thing I have to say my asterisk/a2billing to bill based on local access number. so How can I retrieve called number (eg. 03-6832-1040 and 0120-272-060 is our ISDN PRI access number) to my asterisk server so i can

Hello All, I got one quick question on A2Billing. Specs: - - A2Billing v1.3 - OS CentOS 4.5 - Asterisk 1.2 - Zaptel 1.2 Did the installation and everything is working as it suppose to... Using the A2Billing documentation, I created the RateCard, SIP Trunks, and SIP Customers. I was also able to login using XLite Dialer and was able to call out to my SIP Trunk also. Now how can I remove the

Hello everybody, This is a problem disturb me for long. I run asterisk Asterisk 1.4.14 and A2Billing 1.3 in the same Debian 4.0 ETCH server. And there is also FoneBridge for TDM over Ethernet with E1 to make as well as receive calls from mobiles or PSTN. And IAX2 trunk runs between Asterisk and A2Billing. For most of the time they really do a good job. But some hours or days later----I mean it

I have been asked by my church to recommend a VoIP system which can do the following. They do internet radio shows which are sometimes broadcast on radio. They are looking for a system which does the following for about 5 agents, exactly as they have described it. 1. Take incoming calls 2. Put them on hold if there is no one to handle the call immediately, or transfer them to an available

Hello everyone. I'm using Asterisk 1.4.31 and A2Billing 1.7.0 to manage a small wholesale operation, so I configured A2Billing for not to answer the call nor play any greetings or balance notifications to the caller. I'm authenticating each customer by it's IP address, and each customer has it's own context, in which I set the following: ;=====in extensions.conf======

Hello everyone. I'm using Asterisk 1.4.31 and A2Billing 1.7.0 to manage a small wholesale operation, so I configured A2Billing for not to answer the call nor play any greetings or balance notifications to the caller. I'm authenticating each customer by it's IP address, and each customer has it's own context, in which I set the following: ;=====in extensions.conf======

Hi fellow Members!I'm Systems administrator at a school using SAMBA 4 as AD DC. As you know, WIN11 is at the doorstep and my "old" Samba4 Server (4.9) doesn't serve Windows Servers (Server 2019) very well, e.g. the latest issue is that the domain administrator cannot access the GPO's or other informations from the Samba-LDAP (authentication failure ?). I think that it has

Dear List,finally my new Samba 4.17.9 is up and runnig on the desired machine with all the FSMO roles transferred and the old DC demoted. What I want to know now is how the smb.conf on my new DC should look like.Is it only copy the smb.conf used so far to the new machine, does it stay on the old machine ?? How do i write the path for the shares ?How are my users transferred ? ( Has it been done

I have two servers each with one TDM card from Digium and three POTS lines going into each server (each POTS line is one individual number). and I want to have all incoming calls into server B be directed to the IVR on server A and to be able to fail over to Server B in case Server A has an issue (it can be a manual failover and I actually prefer it to be a manual process). I've

Hi Peoples, Great day for the callingcard-fan ! Just a little mail to let you know that a new version of A2Billing 1.1 (Asterisk2Billing) is available! Many features have been added, lot of bugs solved and hundreds of good improvement made, so there we go -> http://www.asterisk2billing.org The key newest features : * Ecommerce product with API addons - Integration with OsCommerce *

Hello; I am facing a trouble with A2Billing when using analogue lines because the channels are not closing properly when dialing happen through A2Billing (it seems the dialing scenario including the hangup is not handled properly through A2Billing but I do not have control on this). But when I do dialing from asterisk and using analogue lines, I do not face a trouble because I can write the

Hello I'm using an older PC from 2000 that we have lying around at the office to learn about Asterisk using Pound Key 1.0.1 (http://www.rpath.org/rbuilder/project/asterisk/). It's using an AMD Duron 600MHz, a Gigabyte GA-7ZX motherboard, and two FXO Astralis X101P clones that I bought through eBay. Here are the three issues I have. Sorry, forgot the floppy with dmesg, lspci, and

OK Dears; Is the exten => _X.,2,Wait,2 no more working with Asterisk 1.8? What is the equivalent? I installed Asterisk 1.8 and Star2Billing 1.9 but I am getting this error if someone can advise me: Executing [9615806234 at a2billing:1] Answer("SIP/gwsshihabuddinkw-00000014", "") in new stack [Apr 5 02:59:05] WARNING[2941]: pbx.c:4055 pbx_extension_helper: No application