similar to: BSNL caller ID (India)

Hello, is it possible to rout ALL RTP Data over Asterisk, like SIP1 <---RTP---> Asterisk <---RTP---> SIP2 I know it seems quite useless. But I want to simulate a IAX -> SIP connection and have no Phonecard installed on my computer ;) Thanx, Kalle

I have some Analog card on a PCI slot of a remote computer, Is their a way I can figure out remotely the name of the card. I have FC6 installed on the machine. Regards, Sanjay Rajdev

Do anyone has an idea about an open source SIP API written in C# that can communicate with Asterisk, to call out? Regards, Sanjay.

What is the best alternative for getting the IVR and other prompts recorded for Asterisk. Regards, Sanjay.

I have a CISCO 7912 phone, the LED on the phone does not glow when there is new voicemail, can we configure Asterisk to have the LED glow on new Voicemail. Regards, Sanjay Rajdev

I am having problem while having asterisk work with ODBC (Postgres) The error that I am getting is "config.c: Realtime mapping for 'sippeers' found to engine 'odbc', but the engine is not available" I really donot know what has went wrong. I have set the ODBC connection properly I have verified it using :: [root@asterisk ~]# echo "select 1 " | isql asterisk

I am generating an outbound call through the Manager API and bridging it to an internal Extension, my problem is I am not able to find the logs for the call generated by the Manger API, Since on the same Asterisk server there are many users connected and I am receiving lot of Events back, not able to recognize which was the call generated by me as same time multiple users are dialing out.

Few days back I installed Asterisk 1.4.2 with Zaptel 1.4.0. All SIP accounts were working fine, today I tried to install a fxs Sangoma A200 card and got the following error. [Apr 12 01:15:17] WARNING[31018]: channel.c:3024 ast_request: No channel type registered for 'Zap' [Apr 12 01:15:17] WARNING[31018]: app_dial.c:1090 dial_exec_full: Unable to create channel of type 'Zap'

Is there anyway to setup a queue with only one agent (device) which is always logged in. So when a call hits that queue the device will ring (if not already on a call) or will be put in the queue if the call is already in place? Thanks Miles -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello All, I would like to only use the gsm codec for all the calls, is it possible I want to use minimum possible bandwidth as we have most of calls over Internet. Regards, Sanjay Rajdev

I am attempting to use an IAX2 channel between two Asterisk systems. This would seem to be a normal thing to do. I actually want to trunk traffic between the two that are in remote locations. However, I have started with what I think is a simple configuration, which should allow for one way calling. Attached are the pertinent parts of my configuration files. I am attempting to place a call on

Dear Sanjay, Sorry sanjay i miss to explain completely. My PC2PC mean is Dialer2Dialer i want to allow call between Dialer with out any registry and authentication through IAX. so i need to setup Asterisk accept calls from any user and users can call to each other without any password and registration. please help how can i configure Asterisk using IAX in this regards. thanks, Asif Message: 9

Hi, I just compiled and installed Asterisk-1.4.2 along with zaptel-1.4.1 and libpri-1.4.0 on a Debian machine with a TDM400P card. Everything goes ok but when I try to make a call through the ZAP channel get an error message about NO ZAP CHANNEL AVAILABLE. Ztcfg and zttool show the card correctly installed. When I tried to use the debug command ZAP SHOW, it was not present in the CLI. My

What version of SIP do Asterisk 1.4.x uses. Regards, Sanjay.

I am planning to write a module to find if a Special Information was detected or not. Can anyone please help me to figure out the below fields? 1. The Frequency of a frame 2. Length of frame in milliseconds Thanks in advance. Regards, Sanjay.

Hello Everyone, I have a 2 Asterisk Servers, one in US and another in India. Once someone from US calls, call hit US server and then is forwarded to India which then is answered by someone. i.e. Caller --> US Asterisk Server --> India Asterisk Server --> Employee(India) The Employee in India decides that the call was for Employee in US, so he transfer the call to the employee in US.

Hi All, Channels 25-28 on a customers PBX are regular Zaptel FXO cards that are hooked into 4 incomming phone lines. They are all in a group to do automatic rollover for outgoing calls (if channel 25 is being used, dial on channel 26, etc.). Sometimes when a user is dialing a number, instead of bridging to one of the FXO cards it goes and rings to Zap/1-1. This doesnt occur all the time but some

I am trying to configure Asterisk for BSNL, india network. I have successfully configured it for outgoing calls. When any outside number make any call to trunk then it receives the call properly but when the call is disconnected by inside extension then outside phone does not get a busy tone. Asterisk incoming call log: -- Executing [s at incoming:2] Dial("Zap/4-1", "Zap/1")

Hi, I have three Iaxy devices (s101i) parts. Two of them seem to work fine. The third plays a loud repeating click sound when an analog phone is plugged in. I can provision all of them, and make calls to all of them. The clicking one will blink when a call is incoming, but no audio from the call can be heard on the handset, and the caller only hears silence. The same handset works on the

I am trying to write a customized app using C that would fetch voice file from SQL Server 2000 using ODBC and FREETDS. Currently I am only able to fetch first 63 KB chunk from the DB, and not able to fetch the rest of the file, below is the code that i am using to do so, fd = open(fullpath, O_RDWR | O_CREAT | O_TRUNC, 0770); if (fd < 0) { ast_log(LOG_WARNING, "Failed to write