similar to: wct4xxp problem

Hi, I'm having problems with a TE420P card, in which I cannot make calls using spans 2 through 4. After a couple of days of working correctly, spans 2, 3 and 4 start failing (can not make calls). The system is configured to work with SS7. After the ACM message goes out, immediately a REL message is returned. I searched for error messages in /var/log/messages and could not find a clue

Good morning, GnuCashers, Some (many?) of you may have noticed the outage of 'code.gnucash.org' starting with a lot of packet loss on Thursday and escalating into a complete outage by Friday. This took out our Subversion, Wiki, Email List, everything server. Well, as of 2:15pm US/EDT on Saturday (yesterday) everything should be back to normal and operational. If you don't want to

Folks, I really hope you can help me here - I'm beginning to tear my hair out! About 10 days ago my company moved to a new office. As a result of this, we've plugged our PBX box, which has happily been running for the last three years, into our new E1 line. Since then, I've been seeing intermittent yellow alarms. Obviously, since this was working fine in the old office, the thing to

hi all, i am getting crazy with my TE410P - it won't work now we already think that the only thing which can be wrong is the cable. At our telecom endpoint we have 1-2 tx, 4-5 rx So - which cable do i need to get it working Already tried a cross over cable 1-2 -> 4-5 / 4-5 -> 1-2 (with this cable nothing works -> red alarm on both ends) Also a normal cable 1-2 -> 1-2 / 4-5 ->

We've changed E1 providers and I'm trying to reconfigure an E400P to make it work with the new lines. They're supposedly "standard" EuroISDN lines (in the UK). I'm initially just trying to get a single line up. I have the following in /etc/zaptel.conf: span=1,0,0,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 loadzone=uk defaultzone=uk The LED on the back

Hello all- I have a Digium TE410P in an HP DL145 G2 dual processor server that generates well over 100,000 interrupts per second (sometimes I?ve counted 160,000+ per second) generally resulting in either the system becoming swamped and unusable or the kernel disabling the IRQ the TE410P is on resulting in the spans on that card being unusable. I have confirmed that the card is good by placing it

Say I get an ADIT 600 with two FXS8A and one FXO8A from ebay. a. Is it good for Asterisk? b. How do I connect the extensions and lines to it? Do I need a special jack? Can I get that jack in every corner? c. where can I find help for configuring it? d. what kind of backup does it have? Does it need to be reconfigured after a power outage? Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd.

Just to share some experience with everyone about what happened today to our Asterisk 1.4 box with Digium TE412P card. We had an unscheduled power outage which shut down the Asterisk box. When the power went up, Asterisk came back up okay but the ports on the card were all red. Zttool show red alarm and cat /proc/zaptel/1 show red alarm today. Both incoming and outgoing cannot be made. When a

Dear All I installed a Digium card TE405P with zaptel and its running successfully with no alarms, but asterisk is not running . Any one have a cure or advice 03:09.0 Communication controller: Digium, Inc. Wildcard TE405P quad-span T1/E1/J1 card 5.0V (rev 02) Nov 14 07:56:58 localhost kernel: wct4xxp: Clearing yellow alarm on span 2 Nov 14 07:56:58 localhost kernel: wct4xxp: Clearing

Hi all, I'm having some problems getting TDMoE setup for the 1st time. I have a TE405P installed in the main server with an ethernet cross-connection to the secondary machine. (Yes, I know about IAX2 but I want to use TDMoE to simulate using T1s.) I'm using -HEAD from yesterday. On the main machine /etc/zaptel.conf: loadzone = us defaultzone=us

Dan Langille via Nut-upsuser <nut-upsuser at alioth-lists.debian.net> writes: > I have an idea for my shutdown process at home. My goal: maximize the network run-time. At present, the UPS has a run-time of about 57 minutes. > > This is my idea: > > * shutdown the servers after 15 minutes of downtime (for me, that's when battery.runtime hits 40) > * leave the network

I am trying calculate a probability using numerical integration. The first program I ran spit out an answer in a very short time. The program is below: ## START PROGRAM trial <- function(input) { pmvnorm(lower = c(0,0), upper = c(2, 2), mean = input, sigma = matrix(c(.1, 0, 0, .1), nrow = 2, ncol = 2, byrow = FALSE)) } require(mvtnorm) require(adapt) bottomB <- -5*sqrt(.1) topB <-

On Tue, February 23, 2016 10:13 am, m.roth at 5-cent.us wrote: > Juan De Mola wrote: >>>From: John Hodrien <J.H.Hodrien at leeds.ac.uk> >>>On Tue, 23 Feb 2016, Juan De Mola wrote: >>> >>>> CentOS 6 has problems printing when the Internet goes down. And 7 is >>>> still untested for the software we are running on Linux. >>>

I have a CentOS-6.2 server in Italy. Every few months the server gets into a strange state and stops working after a power outage. I should say that this does not occur after every power outage; I suspect, but have no real evidence for this, that if the power comes back too quickly then the machine gets confused because it is in the middle of closing down. If I am in Italy the solution is simple;

TE410P card down. I have three (3) TE410P in one machine running asterisk with SS7. My problems started last week when one of my cards started switching to E1 every time after reboot. I set the following in dahdi.conf and that solve the problem. /etc/modprobe.d/ options wct4xxp t1e1override=0x00 Now all 4 ports on that card is down with Red Alarm. I tried rebooting the machine and

Hi Arjen, I've just read the FAQ and got to the question: "Q: How can I make upsmon shut down my system after some fixed interval?" Well it looked like the question was there for me. :-) You say: Ask yourself this: why buy a nice big UPS with the matching battery and corresponding runtime and then shutdown early? If anything, I'd rather have a few more minutes running on

Hi, recently I observed that during a power outage, my NUT setup doesn't shutdown properly. Indeed it never reaches the LowBattery state to notify and initiate shutdown on clients. Reviewing my setup and logs I think I'm facing multiple problems and I'm unable to point to real root cause. First, let me focus on my scenario and current setup: In normal status (ONLINE, fully charged)

Hi all, I am using a TDM400P card with 2 FXS and 2 FXO modules. Everything seems nice, but i'm not able to make calls nor to receive any. When I try to make a call, I keep receiven the "all circuits are busy now" message, and when I receive calls, asterisk doesn't seems to care (don't get anything on the CLI) I'm using Asterisk 1.2.17 and Zaptel 1.2.16 from Xorcom's

Hi, On Tues Jul 17th, we had a full GitLab outage from 14:00 to 18:00 UTC, whilst attempting to upgrade the underlying storage. This was a semi-planned outage, which we'd hoped would last for approximately 30min. During the outage, the GitLab web UI and API, as well as HTTPS git clones through https://gitlab.freedesktop.org, were completely unavailable, giving connection timeout errors.

Hi, A little bit off topic here, but I was wondering if anybody knows about a good dedicate server provider, that offers CentOS (but ofcourse) as a os choice, and that is very reliable. I am using SuperbServer, but as of this moment 2007/03/19 1406 America/NewYork time, my server is down do to a power outage at one of their facilities in VA. This is the second outage in less that 5 months.