similar to: deprecated ALERT_INFO var andAMI's Originate command

Hello, I've got my dialplan configured to do a double ring when a customer service call comes in, and a normal ring when an extension is dialed directly. When a customer service call is transferred, I want to ring to revert back to normal. In the local extension macro, I have the following ; make sure ring is set to default exten => s,n,NoOp(${ALERT_INFO}) exten =>

I am wondering if there are any tricks getting the Cisco ATAs to do "distinctive rings" via the ALERT_INFO variable? I have seen some contradictory information in the Wiki, and I tried the example there. I then sniffed the connection between the server and the ATA and didn't see the header sent like it is "supposed" to be. If someone out there has a handle on this and

Anyone having any problems with CVS-HEAD-12/24/04-15:59:15 and ALERT_INFO I have a system setup with polycom phones configured to auto answer on internal calls. When we upgraded to the latest CVS the auto answer stopped working. My dialplan has not changed. I did a sip debug and I dont see the alert-info tag in any of the sip traces. Any help would be appreciated. Thanks John Bittner Simlab.net

I have been playing with a 480i with the new firmware 1.2.0.162 I hope to get some form of paging intercom function to work. In the wiki someone post that ALERT_INFO type of paging might be in this version of firmware but I have been unable to find anything on this yet. I have tried sending the ALERT_INFO to the phone a number of ways with no results. I then hooked up my bt100 and tried to dial

A call comes in I set the distinctive ring by setting variable ALERT_INFO then dial a SIP channel. The channel is answered, but then the user forwards the call to another SIP channel. ALERT_INFO is still set. How can I clear the ALERT_INFO variable after the SIP channel is answered so that when the call is forwarded the ring goes back to "normal"?

Hello, I have uploaded a custom ringtone to our SPA-922's for the purpose of sounding like a door bell chime when the doorbell is pressed. I am using __alert_info to set this ringtone. It appears that I can only set the ringtone via alert_info for the ringtones that come from Linksys. Has anyone else seen this issue? I am doing the following: exten => 100,1,SetVar(_ALERT_INFO=doorbell)

Hi, I've just found: http://lists.digium.com/pipermail/asterisk-users/2003-June/014475.html which talks about ALERT_INFO and Cisco phones. How do I actually get this working and what does it do? Do I need to add anything to the configs for the phone or is it just a SetVar(ALERT_INFO=1) - which I tried and it seemed to do nothing at all.. Thanks Andy

Hi All - I'm trying to implement the auto-answer config from the wiki, but the result for me is that the phone just rings as normal. I'm running firmware version 1.4.1 on an IP500. I've added the following to my sip.cfg: <alertInfo voIpProt.SIP.alertInfo.2.value="Ring Answer" voIpProt.SIP.alertInfo.2.class="4"/> and this to my ipmid.cfg

CVS Head from 07/07/2005 I'm trying to make an IP-501 auto answer a call. exten => 301,1,SetVar(_ALERT_INFO="Ring_Ans") exten => 301,2,SetVar(ALERT_INFO="Ring_Ans") # Tried both combinations exten => 301,3,Dial(SIP/5001,15) exten => 301,4,Hangup Sip.cfg for Polycom phone <alertInfo voIpProt.SIP.alertInfo.2.value="Ring_Ans"

Hi All, I am running into a problem setting the ringtones via _ALERT_INFO on the Cisco 7960 phone. I am using * 1.2.1 and have tried setting the variable to several values. I have also tried setting the phone's software to both 7.5 and 8.2 thinking that it might be a version issue, but with no success. I have examined the packets and do see the ALERT_INFO header being sent, but the

But where do can you get this later firmware from? I'm still on 1.0.0.78 on my 480i. Regards Lee -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Peter Passchier Sent: 05 August 2005 00:04 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] AASTRA 480i Firmware 1.2.0.162 SIP ALERT_INFOproblems

Is asterisk able to forward it's ALERT_INFO data to another asterisk server ? My situation should look like the following: Call comes into asterisk1 in SIP. Asterisk1 sets the ALERT_INFO=Bellcore-r2, Asterisk1 dials Asterisk2 (SIP), Asterisk2 dials our SIP device which should ring with the Bellcore-r2 Any way to pass the ALERT_INFO through to the SIP device? Thanks -- Benjamin

I am impressed, I have been trying this for sometime using the SIP image and the only difference I can create is a 'single' and a 'double' ring on the phone. I use the 'single' ring for phone calls and the 'double' ring for the doorbell. I would love to be able to choose a ring tone based on the incoming msn or callerID. The idea of the phone shouting 'Its the

How do you enable auto-login? I went into /etc/lightdm/lightdm.conf, uncommented autologin-user (and set it to = my login name), and uncommented autologin-user-timeout (and set it to = 0). Is there something else I missed? -- Jason Hsu <jhsu802701 at jasonhsu.com>

ive got asterisk running with chan_sccp and three cisco phones (2 7910's and 1 7960). lots of bugs. when i press the speed dial button on either 7910, asterisk dies. also, if i dial from the 7910 to 7910, everything works fine. i can dial from or to the 7960 once, and then one of the 10's and the 60 die and try to reregister. if i take the 7960 out of the mix and remove its

Hello, in the assumption that I understand them correctly I specified in /etc/lightdm/lightdm.conf autologin-user=xxxx autologin-user-timeout=10 so that after 10 seconds the user xxxx is logged-in automatically. What happens is that the user xxxx is logged-in immediately i.e. without any delay. Do I understand the second variable wrong or am I missing something? Thanks for any help. K.D.J.

This is the first release in the stable 1.4 series. This series will be maintained on the lp:lightdm/1.4 branch and trunk (lp:lightdm) will now be used for the unstable 1.5 series. Overview of changes in lightdm 1.4.0 * Correctly implement and test autologin timeouts * Add greeter-show-remote-login hint * Correctly annotate enums in vapi file * QLightDM: Add default constructor

I am trying to get distinctive ringing going again with these phones, depending on the outside line the call comes in on. I had a working 1.0.x Asterisk setup using: SetVar(ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) Which used the short quick rings. In Asterisk 1.4, I have tried several things, but I think the correct syntax is: Set(_ALERT_INFO=<http://127.0.0.1/Bellcore-dr2>) But

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

I'm trying to change the ring tone on my 7960 from the dialplan. I've tried the example on the wiki but it doesn't seem to work. Something like: exten => 3010,1,SetVar(ALERT_INFO=<Bellcore-dr1>) ; selects Ringer exten => 3010,2,Dial(SIP/3010,15) I'm not sure what the Bellcore-dr1 ringer is supposed to be. I've tried replacing ALERT_INFO with another ring tone