Displaying 20 results from an estimated 1000 matches similar to: "Issues with a Linksys SPA 2102 and asterisk"
2010 Oct 06
2
SPA-2102 sending local IP instead of WAN IP in SIP packets
Hi Guys,
This is such an annoying issue whenever it comes up. The sender and receive
always receive the source public IP no matter what in the IP packets but
then SIP packets go out with something like 192.168.0.20.
In this instance, a Bell Canada DSL modem is installed and I saw the
SPA-2102 register properly but only to fail later on due to sending it's LAN
IP to the Asterisk server.
So,
2009 Apr 08
1
Call Pickup Works w/Linksys ATA, not with Cisco 7940G
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
I have an Asterisk 1.4.18 with a mix of cordless phones connected using
Linksys SPA2102 ATAs and Cisco 7940G
2010 Jan 29
2
Questions about asterisk and spa2102
Hi there! First mail on the list :)
1.- is it possible to use an spa2102 to make and revice calls from a
"normal" phone? I mean, I know I can use it to connect an analog to an
asterisk server, but I want to know if it can be used to connect
asterisk to the analog phoneline.
2.- I'm trying to unlock the spa2102 with no succes at the moment, any
links or hint will be very
2010 May 05
4
OT: NAT in SPA922
Hi all,
I've just bought some SPA922. First time with this hardware for me.
I see no LAN tab in its web GUI where I can setup NAT for PC conected to its
LAN ethernet port.
However, when I connect a PC to that port, SPA922 works as bridge.
Anybody can confirm SPA922 can NAT a PC connected to its LAN port? Does
exist such LAN tab for setting up parameters as port forwarding?
(by the way,
2006 Mar 02
3
Sipura SPA-3000 vs Linksys SPA3000
Hallo!
I had ordered a Sipura SPA-3000 in the UK, but the supplier turned out
to be unreliable and never shipped.
Yesterday I went looking for alternative suppliers and found the Linksys
SPA3000 device. It's a different box, but the specs look very similar.
Is this the same device? Has anyone used this Linksys SPA3000
successfully with Asterisk?
Thanks,
Frank
2005 Sep 30
3
SPA-841 "Decode Latency"?
We're investigating audio quality issues in our system; maybe someone
can help. We're using Asterisk as a basic PBX, with a single PRI on one
side and SIP phones on the other: Sipura SPA-841's.
We're experiencing several audio effects which seem to commonly
correspond to network failures (packet loss, high jitter, etc manifested
as "robot voice", dropouts, periodic
2010 Feb 05
0
Do the Linksys Sipura series have a known problem with Asterisk?
I have a Linksys Sipura SPA2102 connected to Asterisk 1.4.27 and
sometimes it doesn't connect at all. I keep getting a busy signal when
I try to dial.
It appears to happen most often when both lines are registered.
The 2 lines on Linksys lines also use different ports. Does that mean
than it is necessary to configure the 2nd line with port=5061 in
sip.conf, or can they both use 5060?
Thanks
2012 Feb 17
1
Should a Linksys Sipura 2102 be configured with nat=yes even if it is on the local network?
Should a Linksys Sipura 2102 be configured with nat=yes even if it is on
the local network?
I have been having some troubles with a Linksys Sipura 2100 series, which
suffers from NO AUDIO after a few calls.. Because it is on the same subnet
as Asterisk it is configured with nat=no. When you think of it because the
Sipura 2100 is a broadband router, the voice part may be considered as
being behind
2010 Sep 06
1
Asterisk Fax
Hi
I know that this topic was on the list maybe dozen of times. But I
have a question regarding the fax support in asterisk, because all the
information I could get does not give me the clear view of if. I read
that Asterisk 1.8 will have strong fax (t.38) support, but I want to
know if these four scenarios will be possible to achieve:
fax machine (phone+fax) connected to ATA --- SPA2102 ATA ---
2010 Nov 21
0
How to configure a Linksys PAP2T ATA to connect an analog fax machine to Asterisk
I was having problems getting a Linksys PAP2T-NA to work with Pitney
Bowes mailing station so it could use its modem to dial home and
download postage/software updates. After scowering the web, I
couldn't seem to find a definite how to article on what settings were
needed. I finally came up some settings by combining the information
from various places around the 'net. I have typed out
2007 Jun 25
0
asterisk not able to hear calling party ring sound
Dear sir
I have setup Avaya with mediant with asterisk
[sip_phone]---[ * ]---[mediant]---E1-trunk--[Avaya]---[analog_phone]
This is my configuration when i call from SIP phone i got ringing sound of phone but whn i call from analog_phone behind avaya i didn't get ring sound of ring but SIP phone speaker ring why i am not able to hear ring sound from analog phone
Regards
2005 May 10
3
Phone attached to Sipura SPA-1001 has no ring
I hooked up a SPA-1001 with asterisk yesterday and all works well except
the phone doesn't ring.
The phone I'm using has a LCD display so I can see the call come in.
(with caller id info)
I can answer and complete the call but it's just not ringing.
The phone rings if pluged into a POTS line so it's not the phone that's
the problem.
I've used the SPA-1001's web
2007 Mar 21
0
SIP peer disappearing
Hi all,
I'm having this weird issue that I can't explain. Maybe someone can
explain what is happening.
This is a Asterisk install that has been in production for 6+ months.
It's version 1.2.10. Couple weeks ago one SIP peer started
disappearing randomly. And I mean it simply disappears. One second
"sip show peers" shows it, and then it's gone. A simple "sip
2010 Feb 20
1
Fax, T38 and NAT
Gentlemen,
I have 3 faxes attached to an Asterisk. Fax - SPA2102 - Asterisk.
0851711201 and 0851711290 is on our WAN, no NAT.
0197673581 is outside our WAN and needs to be NAT'ed.
Sending a fax from 0851711201 to 0851711290, no problem, switches to T38
and fax goes through.
Sending a from 0197673581 to 0851711201, no problem as long as i dont
enable T38 on 0197673581.
But, if i enable T38
2005 Mar 16
2
Dial multiple extensions, but different variables/timeouts
Hi everyone,
I'm wondering I would accomplish the following: I want to dial several
SIP extensions simultaneously, HOWEVER, for different times (say ext
10 for 15 sec and ext 11 for 30 sec), and potentially with different
headers (such as ALERT_INFO) and codecs for each extension. Obviously
whoever picks up first gets the call. After the longest timeout
expires (30 sec in this example) I want
2009 Feb 24
0
Legacy Cisco ATA186I1
The ATA186I1 is way past end of life,
it was the first version of the ATA186,
but it's still working with only a couple
adjustments to a factory default configuration.
Unlike the brand spanking new Cisco/Linksys SPA2102.
Which has a number outstanding issues with Cisco/Linksys
tech support.
It's taking a lot longer than I was expecting to get
the new? box working.? And I may continue
2011 Jun 09
0
Insert name in SIP registry
Via: SIP/2.0/UDP 10.11.22.161:10000;branch=z9hG4bK-a860600e\x0d\x0a
From: Jian Gao
<sip:8181234567 at my.provider.com>;tag=7e9c4091bfc704bco0\x0d\x0a
To: Jian Gao <sip:8181234567 at my.provider.com>\x0d\x0a
Call-ID: daf96244-769f952c at 10.11.22.161\x0d\x0a
CSeq: 48998 REGISTER\x0d\x0a
Max-Forwards: 70\x0d\x0a
Contact: Jian Gao <sip:8181234567 at
2007 Sep 19
0
RTP Read too short with T.38
I have the following situation:
SIP Provider -> My asterisk -> SPA2102.
Time to time I recieve a lot of warnings on asterisk CLI with RTP Read too
short, after T.38 session established.
It hapens only in one direction when fax trasmited from provider to SPA2102.
I noticed, that asterisk did not pases one packet, that i include below.
Asterisk reports warning , and drops that frame
2008 Nov 14
0
Linksys SPA 400, 901 and 921 with asterisk
Hello list,
Topology diagram first:
[PSTN]-----[SPA 400]--------[NETGEAR SWITCH]-------[ASTERISK BOX]
| |
|
|__[SPA 921]
|
[SPA 901]
The problem is the
2010 Oct 08
0
SIP NOTIFY to make linksys/cisco SPA BLF go yellow
Hi,
I was wondering if anyone stumbled upon the correct event in a sip
NOTIFY (from a SUBSCRIBE)
to make the BLF lamps on a Linksys/Cisco SPA9xx/5xx go yellow?
I'm trying to differentiate between "On the Phone" and "DND" with the BLF.
Thanks.
-- James