similar to: Asterisk distributed deployment

Hello *'s, I have question regarding Quintum Tenor AXT800 VOIP gateway can anyone integrate it with asterisk if anyone what is the scenerio i have scenerio which is quite simple but i am confused about it whether it is possible or not : I integrate it with asterisk for interanet no PSTN at all just only IPphones and analog phones connected on FXS port.Is it's neccassary to cannect with

Hi, I'm having problems to register Quintum Tenor DX 3020 on a Asterisk box with SIP. Asterisk always returns "Username/Password mismatch". I've tried all configurations that was on the Quintum's manual, but no success. I've tested the same username and password with a Linksys (PAP2-NA) with the same asterisk box, and it worked fine. Where is the problem ?

Please has anyone on this list had experience with getting Quintum equipment to talk to Asterisk? Specifically a D3000 in my case. It is refusing to register and I'm out of ideas. Any help appreciated. Neil

Hi, just wondering if there is anyone that can help me configure my quintum box to operate with asterisk. i have tried and made numerous attemtps configuring the tenor to work with asterisk@home but have been unlucky. anyone out there has a cheat sheet to configure this device. thanks.. for some reason i cannot get it to work. your help is appreciated.

If Someone did that, How I connect extensions.conf with this type of Hybrid system to work with asterisk inside this schema: PSTN--->PANASONIC KX <------> Asterisk | |--------->send internal call Thanks.

Let's try this again. I have a Quintum AX Tenor gateway sending calls to Asterisk from BT analogue lines connected to FXO. The agents hear an echo on their side but incoming callers hear the conversation fine. I can't seem to find the problem. Anyone seen this issue before? <p style="margin: 0; padding: 0; border-collapse: collapse; font-family: Tahoma, Arial, Sans-Serif;

Hi all, -------- beacause I am a newbie in the asterisk ralm and the existing documentation could not satisfy I'd like to ask you some Questions: 1. Does somewhere in the Internet exist additional documentations for asterisk configuration ? 2. Does Asterisk work as a standard SIP Proxy ? 3. I am just installing a Asterisk PBX in our institute and additionally I purchased some ot the Snom

Hi all, Im trying to build an small home system. I have 2 pots lines, and i need to make 8 extensions and be able to use my old analog phones. What would you recommend to use as the 8 FXS switch? I saw some equipment from quintum, they have a Tenor AS that offer 4 FXS ports. But i don't know if it is the best solution. Does anyone have a better solution to build this system? If an analog

Good day all Is it possable to set asterisk up as a cdr server for other voip units We got a quintum dx here and its got a option to log to a cdr server on port 9002 Thanks Altus

Hello all, iam setting up an asterisk box behind NAT to get SIP calls from outside or internet. In that eschema i can setup SIP calls but, while from the outside nat people can hear me, Im unable to listen anything behind NAT. Out of firewalls settings( I checked this to port fowarding) what can i do to get this working fine?. Thanks G.

Hello, I have a TDM400P with 4 FXO ports, currently using three. When sending or receiving calls on this card, there is a nearly constant popping/clicking sound, it is related to the echo cancellation?. I adjusted my gains properly, but to no avail. I even found that setting echotraining=no in zapata.conf didn't change the scenario at all. I've plugged analog handsets into the

I am trying to connect to a vocal server from an asterisk server. A call is received via iax2 to my asterisk server. I then initiate a SIP connection to the vocal server. everything works great except dtmf doesnt work. A cisco 5300 can connect to this vocal server and do dtmf without a problem. I have my dtmf set to rfc2833 in the general section of the sip.conf . I can confirm that the

Hi all, I am planning to use VoIP gateways to connect remote offices to Asterisk. Not having much experience with these and Asterisk I would appreciate any info/experience that you might share with me as to their interoperability with Asterisk. I am interested with in rather bigger gateways (order of E1's) from: AudioCodes - Mediant Mediatrix - 1531 Quintum tenor Multupath D3000 Has anyone

hello, I would like to realize a VoIP Gateway, with some extra-features. The aim is to get the phone number of the caller, to make research in our database, and to put him automatically through the good employee. The company is equipped with a VoIP network : software : - PSTNgw - Ohphone - OpenGatekeeper hardware : - Quicknet phonejack - gateway : Voicetroniw OpenLine4 Is it possible to

hi, maybe someone out there already has some experience and can help me. I have just ordered an E100P card from Digium, I already have a basic asterisk setup up & running. My application is the following : I want to accept incoming calls from the PSTN to Asterisk, and without asking anything of the client just pass them immediately to a call gateway in USA, actually we are planning to use

Hi, I don't seem to be able to get music on hold to play normally. The sound gets often interrupted with a few seconds of silence then starts playing again. I'm using mpg123-0.59r and tried mp3 files with different sample rates with no luck. If that matters, endpoints are SIP ata186, SIP Cisco 7960 and H.323 (over chan_h323) Quintum Tenor. Sometimes it may play fine for a few minutes

Hello, I've tried to transfer a IAX call to a number configured on a traditional PBX, but it doesn't work. I have a traditional PBX connected with a zap channel to Asterisk in the following way: IAX/SIP client --> Asterisk (FXO) --> (FXS) traditional PBX ---> OFFICE Phones Asterisk is connected to the PBX with an internal number configured inside it. In other words i keep an

Hi All. I'm using RedHat 9 I configured the chan_h323 and asterisk from CVS. This is the scenario SJ_lab_phone(sip) ---------------> Asterisk -------------> H323 GK --------------> PSTN I have tried all codec's and always the same result, the called phone will ring without dropping for how ever I allow it to but as soon as it is answered it immediately gets disconnected.

Hi Everyone... I am running Asterisk 1.2.22 on Debian "Etch". I installed it from sources. I have also installed tiff-v3.6.0, spandsp-0.0.3. and downloaded http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_rxfax.c http://soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/app_txfax.c and a Digium TDM card with 4 FXO ports When my dialplan

Hi all, i use the DISA app for giving the user a trunk after a authentication through PGSQL as follows .... auth via PGSQL exten => s,1,DISA,no-password|test I think the user is now in context "test" and he could dial any number if the extension-conf in "test" is for example exten s,1,Dial,OH323/<myip> But if the user dial one digit the call build up