similar to: Asterisk Registering to other SIP servers.

I have the problem when my localnetwork do telnet to the net Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth2 my files are the following: policy #SOURCE DEST POLICY LOG LEVEL LIMIT:BURST loc net CONTINUE info loc fw ACCEPT info loc loc ACCEPT loc dmz ACCEPT info fw

I am attempting to forward http requests to my external interface, from internal machines to a machine that is located on the internal interface, via the firewall rules. Externally, I am able to forward the port to the webserver located behind the firewall, and I want to use the same hostname/ip for clients if they are on both sides of the firewall. Note, that I only want to do just the one port,

Hi gurus!!! I have a Freepbx with Asterisk 1.8.25.0 with a sip trunk on the pstn Every minute asterisk sends an OPTION Request, i beleived that it's related to qualify functions. The every minute annoyng answer of the pstn is "403 Forbidden". Some people told that asterisk is not sending the username in the OPTION, required by the pstn. Taking a look of the example of rfc3261.txt

Hi list! Since the internal calls work as expected and I can register my Asterisk on an external provider, I'd like to add a new feature and allow my mobile phone to connect to my Asterisk and manage calls. Well, first of all, my Asterisk is NOT direct on Internet available, but behind a NAT. So I configured my sip.conf: localnet=192.168.200.0/24 externhost=myhost.noip.com externrefresh=180

On 06/14/2017 at 10:17 PM, Joshua Colp wrote: > On Wed, Jun 14, 2017, at 05:09 PM, Michael Maier wrote: > > <snip> > >> >> I can now say, that asterisk / pjsip seams to work *mostly* as expected. >> Just one exception - and that's the package in question, which can't be >> seen in tcpdump. >> >> I extended the above patch by adding

Hi All, This question is probably more for the LDAP experienced users/developers as I'm sure it would work fine if I weren't using LDAP (but I am, and I'm almost there with the setup!!!). I've setup an extension with the following: AstExtension: 210 AstApplication: Macro AstApplicationData: call-ext,SIP/testuser&IAX2/testuser,210 When I dial this extension, I see the

Hi, I hope you might give me some hints on how to find where my configuration is wrong, I am new to Asterisk and do not know, how to find the problem. Running Asterisk (version: 1.8.13.1~dfsg-3) on Debian Wheezy. On the same maschine: Hylafax fax server. I want hylafax to use t38modem (a virtual T.38 modem) for sending faxes. t38modem schould connect to asterisk on the same host. If hylafax

Hello, I have several very large data sets (1-7 million observations, sometimes hundreds of variables) that I'm trying to work with in R, and memory seems to be a big issue. I'm currently using a 2 GB Windows setup, but might have the option to run R on a server remotely. Windows R seems basically limited to 2 GB memory if I'm right; is there the possibility to go much beyond that

On 06/04/2017 at 01:41 PM Telium Technical Support wrote: > Just a guess (without knowing about your network), but are the two ends > points on public networks and visible to one another? If not the reinvite > may be passing an internal (nat'ed) address to the other and the connection > will fail...just a though t38modem -tt -o /var/log/t38modem.log --no-h323 -u 91 --sip-listen

Hi all. I'm trying to get printing going with CodeWeavers Wine and have come to the part where running "regapi" is required. Unfortunately this is not included with the CodeWeavers release. Can anyone suggest a way forward? Many thanks, Pete. --------------------------------------------------------------- | Pete Philips \|/ | |

Hi, Does asterisk support mutl-port binding? Say beside setting the port 5060 in sip.conf, I want to use another port, say 6060. How can I set to use more than one port. Is it possible? unplug

On 06/05/2017 at 11:30 AM, Joshua Colp wrote: > On Sun, Jun 4, 2017, at 10:40 AM, Michael Maier wrote: >> On 06/04/2017 at 01:41 PM Telium Technical Support wrote: >>> Just a guess (without knowing about your network), but are the two ends >>> points on public networks and visible to one another? If not the reinvite >>> may be passing an internal (nat'ed)

I have been crashing R while using lattice. My system consists of a Mac Intel, R 2.5.1, lattice 0.15-5, and I plot through the default quartz. R crashes after plotting several lattice functions. Has anyone else encountered this problem and does anyone know the cause, or a solution? Is this a lattice:mac, lattice:quartz, Lattice:me issue? example... This crashes my system after plotting.

Marta, As Alan pointed out the loc->net policy is Continue, it should probably be loc->net ACCEPT. This is from Tom''s Shorewall Documentation... http://www.shorewall.net/Documentation.htm#Policy CONTINUE - The connection is neither ACCEPTed, DROPped nor REJECTed. CONTINUE may be used when one or both of the zones named in the entry are sub-zones of or intersect with another zone.

Hello, I am experiencing IMAP authentication delays when a client first authenticates, or after the last auth timeout. There are only a handful of clients - less than 5 - using the server. I am using a mysql database and I have verified the PAM auth is commented out. Other than that I can't figure out what might be causing the slow authentication. The first time a client authenticates

On 06/14/2017 at 05:53 PM Joshua Colp wrote: > On Wed, Jun 14, 2017, at 12:47 PM, Michael Maier wrote: > > <snip> > >> >> I added this patch to see, if really all packages are are freed after >> they have been processed: >> >> --- b/res/res_pjsip/pjsip_distributor.c 2017-05-30 19:44:16.000000000 >> +0200 >> +++

Have you tried NAT=force_rport ? Ashwin -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Luca Bertoncello Sent: 07 June 2015 11:44 To: Asterisk Users Subject: [asterisk-users] Curious problem with NAT Hi list! Since the internal calls work as expected and I can register my Asterisk on an external

On Mon, Jun 5, 2017, at 12:00 PM, Joshua Colp wrote: > On Mon, Jun 5, 2017, at 11:49 AM, Michael Maier wrote: > > On 06/05/2017 at 11:30 AM, Joshua Colp wrote: > > > On Sun, Jun 4, 2017, at 10:40 AM, Michael Maier wrote: > > >> On 06/04/2017 at 01:41 PM Telium Technical Support wrote: > > >>> Just a guess (without knowing about your network), but are

On Mon, Jun 5, 2017, at 04:26 PM, Michael Maier wrote: > On 06/05/2017 at 06:29 PM, Joshua Colp wrote: > > On Mon, Jun 5, 2017, at 01:22 PM, Michael Maier wrote: > >> > >> Do you have any idea where to start to look at? Adding additional output > >> in the source code? Which functions could be interesting? I may add own > >> debug code to see why things

I'm just getting familiar with Dovecot. I get this error when I send mail to a mailbox that is over quota. I have no problem with the way quota is working and I have no problem with the sieve script detecting spam and delivering it to the Spam folder. Just trying to figure out why I get this error when quota is involved: Error: sieve_execute_bytecode(/var/sieve/global.sievec) failed See logs