similar to: Problem HandyTone 488 does not call transfer

Hi guys, I have recently installed a Asterisk Server with CDR Call Detail Records. I have installed it over a Asterisk 1.2 , but now It do not run . I have installed it with the following procedure: # yum install ncurses #yum install openh323-devel # yum install mysql-server # yum install mysql # yum install php-gd # yum install php-mysql # yum install mysqlclient10 # yum install zlib # yum

Hi anyone know if i can connect a Grandstream HandyTone 488 to Asterisk ? Actually my HandyTone 488 are connected to: wan port to my lan line FXO port are connected to my local analogic line i want that when a call in by my analog line, it's sent to my asterisk for other voip post can answer .. it's possible ? thanks bye

Hello, I'm trying to configure Asterisk and my Handytone 488 to pass incoming calls coming over PSTN through the FXO port to Asterisk, which will process the calls with voicemail, or some such service. I point the Handytone 488 FXO port configuration to 192.168.0.2 (the machine that is running Asterisk) and have configured a catchall extension to receive the call: [from-pstn] exten =>

For some reason, this didn't go through the first time, maybe because I had JUST signed up. Hello, I'm trying to configure Asterisk and my Handytone 488 to pass incoming calls coming over PSTN through the FXO port to Asterisk, which will process the calls with voicemail, or some such service. I point the Handytone 488 FXO port configuration to 192.168.0.2 (the machine that is running

can someone who has a grandstream handytone 488 working with making outgoing calls through the fxo port please post the parts of their config that deal with this port? i cant quite seem to get it to make outgoing calls despite having tried several completely different ways of making that happen. i have been told that asterisk@home has this built in to just a button hit, but i dont want to

Anyone tried to muck around with using the 488 for both fxs and fxo with asterisk? I've been playing with one for the last couple of days, and it looks like its a little lower quality then the spa3k. No gain settings, echo canceller is less then ideal on long analog pstn loops, etc. Anyone with good experiences?

Hi, I'd set the daylight saving option to yes on all the GXP-2000 phones, but apparantly it doesn't move it an hour back on last sunday of October. So now I am stuck will all the phones showing the wrong time. Isn't there an option so that it'll automatically update daylight savings? Thanks -- Zeeshan A Zakaria -------------- next part -------------- An HTML attachment was

Hello, I bought a Grandstream Handytone 486 to forward incoming calls from our old analogue PBX to the asterisk server. My first test was connecting an analogue phone to the Handytone and calling a sip phone - worked. Now I used the same cable to connect the line port of the Handytone to the analogue pbx. When I call the number of the analogue PBX I hear a clicking inside, but the call

There seems to be a problem related to the Grandstream HandyTone-286. When a call is placed through the adapter, the call can be transferred. However, when a call is received through the adapter, the call cannot be transferred. The problem does not exist with a BudgeTone-101 (1.0.4.23) using the same Asterisk configuration and Dial() settings (Ttm). I tried all of the firmware on their BETA

I have an analog Fax machine which I wish to connect to the network and the Asterisk server. It will connect through a GS Handytone 286 converter and then into the LAN. Is there any information out there on what I need to write in *sip.conf* and/or *extensions.conf* to make sure the fax works as a fax? Channel 8 on my T1 is a reserved, dedicated line for the fax number. Do I need to

Hi, Just received recently released Grandstream handytone 286 ATA for testing. I can call ATA from any other extensions and conversations seems to be of quite good quality. However placing calls from ATA is not possible at all to any extensions. After dialing there no indications of any kind from ATA at all. It just "hangs in there". ATA is behind NAT, registers to an * with public IP

Hi ; Have two handytone 486 and want to use them as digium TDM400 fxo-fxs card... I mean is it possible to direct pstn calls from astersik (extensions) to handytone line port directly and vice versa ?... Thanks in advance Betul Onemli not : Bu e-mail iletisi, sadece adreste belirtilen kisi veya kurulusun kullanimini hedeflemekte olup, mesajda yer alan bilgiler kisiye ozel ve gizli

Hi folks, How I can change default level in asterisk from 3 level to 7level, using the script /etc/init.d/asterisk

Hi, Yesterday I finaly got my handytone sip adaptor. It works.... But when dialing to and from ISDN I got echo in both ends, I had tried diff. codecs, but then the GS wont work at all - It can do a call, but after 3 'ring' it disconnect. Any hints ? _________________________________________________________________ Scope out the new MSN Plus Internet Software — optimizes dial-up to

Hello, Has anyone gotten a Grandstream BT100 to work with Level 3's 3Tone? I've been able to get my extension to interface with it, but there is no sound and the call on the GS side terminates prematurely. Here is the relavent portion of the SIP.CONF [4007] ; Budgetone BT100 type=friend insecure=yes context=test-budget username=4007 fromuser=4007 callerid=4007 host=dynamic nat=yes

Hi All, I've an Asterisk Server behind a NAT. Using DNAT, I've opened port 5060 and all 10000:20000 udp. Sip configured with externalip and subnet. I've another site, also with NAT, where I map the rtp port (as defined in the client) to map to the local client (DNAT). Using Xlite, this configuration works, it requires using the quality=yes and NAT=yes/always in the sip ext

Could anybody shed some light in which device they would use in this situation: Remote office PBX's to be connected via a) Cisco ATA-186 or b) Sipura SPA-2000 or c) Grandstream HT-ATA-286 to go via the net to an * box. Pros / Cons for each device would be appreciated! Thanks Kris

I'm considering a situation where I buy about twenty ATA devices. I've played with the Linksys / Cisco PAP2T, and got that working fine with some inbound and outbound faxing. The web GUI was okay. I'm seeing prices around $45 to $50 for this thing. It comes with two FXS ports, but I only need one FXS. I've seen the Grandstream Handytone 286 online. It looks promising as an

Hi List, I am from Peru, I have installed an asterisk server in my company with digium card E1 TE120P, I am having issues when i make calls, here the error from my server [Oct 18 09:13:50] WARNING[2377]: channel.c:3232 ast_request: No channel type registered for 'Zap' [Oct 18 09:13:50] WARNING[2377]: app_dial.c:1106 dial_exec_full: Unable to create channel of type 'Zap' (cause

I am trying to get the handytone 286 to make a very simple call to * and having problems. It registers with * just fine, but when I place a call (to echo test, for example), the RTP stream seems to have problems opening. Here is there error I get in *: WARNING[98311]: File chan_sip.c, Line 464 (retrans_pkt): Maximum retries exceeded on call 20d1c411-e210-5f3d-3f88-19035c8fcb26@192.168.2.6 for