similar to: TDM400P/FXS in a HP DL380 G5

Hi I've a Sangoma A200D with 2FXO and 2FXS. When using it with only the FXO module, it's all good. But when I put in the FXS module and connect the power, logs tells me not enough power. > Mar 31 14:11:54 phone kernel: [ 4761.246931] wanpipe1: Module 1: > Failed to powerup within 600 ms (8V : 72V)! > Mar 31 14:11:54 phone kernel: [ 4761.246937] wanpipe1: Module 1: Did

I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It has eight 750GB drives in a hardware RAID6 array. Its acting as a host for a number of OpenVZ containers. Seems like every time I reboot this server which is not very often it sits for hours running a disk check or something on boot. The server is located 200+ miles away so its not very convenient to look at. Is

Hi I'm having problems getting the TE420 working in HP DL380G5 servers. The cards don't seem to be detected 100% by the BIOS. With two cards in the server they are never detected. things I've tried: 1 Update firmware to latest (P56) for the server 2 change irq settings 3 disable all onboard devices on server and remove raid controller 4 different cards in different slots What I

I''ve got a client demanding the use of HP DL380 G5''s, for various historical reasons, for a server room. I''m going nuts trying to figure out if the available CPU''s for them support VT, so I can avoid building them a separate Windows box. Unfortunately, the local web proxy is overloaded, so actually browsing the JavaScript/image loaded web pages for HP is

A bit OT, but I'm running CentOS-5.6 on this machine (in fact on two of them) and it seems to run perfectly - I've had no problems at all. Except that I'd like to add a second ethernet port, and am not sure where one can find a card that will fit this machine. As far as I can see, it requires a half-height PCIe card, which seems to be rather a rare animal. (There doesn't seem to

greetings, for those of you in the know, may i have some assistance in helping to make better decisions in purchasing more used server toys to install CentOS on please? :-) in the Compaq Proliant Rackmount DL380 line, the one that looks like the older 1850R is called a G1 meaning Generation 1 right? and then the DL380 G2 is a redesign that is gray and just has 6 drive bays up front correct?

Hi to all out there using HP DL380 G4 servers, i found a way to get the Digium TE410P with older firmware running on a HP-Compaq DL380 G4 Server! Here's the step-by-step description: 1. download the latest BIOS (in my case it was 4.04 from date: 06/02/2005) for the HP-Compaq DL380 G4 using the "Systems ROMPaq Firmware Upgrade Diskette for HP ProLiant DL480 G4 (P51) Servers" Link:

Hi, all: I can't make my HP DL380 G2 servers to boot off local disk by using "default local" line in my PXE boot menu. For fully automated server setups, I have configured all my DL380 servers to always do PXE boot. By manipulating the default boot option in boot menu, I can control a server whether to install a new OS via kickstart or just boot off local disk. This scheme works

Hi. I am trying to boot Xen 2.0.5 on an HP DL380 G3. It won''t. The box has an "HP Smart Array 5i" that when running normal Linux is handled by the CCISS driver. I suspect that this is what is not supported in the stock Xen kernel. Am I correct that I need to build a kernel from source ? According to http://lists.xensource.com/archives/html/xen-devel/2004-11/msg00709.html there

greetings pre centos install raid5 setup on a compaq dl380 is asking for stripe size. 16kb 32kb 64kb i am using one of the built in controllers and the machine has just a gig of ram and 4 18.2 gig 10,000 rpm drives machine will be an email server with simple web hosting as well. suggestions? thanks - rh -- Robert Hanson - Abba Communications Computer & Internet Services (509)

Hello List, i downloaded centos6 x86_64. With DVD-iso1 i made a booteable usb-stick (universal usb installer 1.8.5.7). When i boot my HP ProLiant DL380 G4 from the stick, the CentOS boot screen comes up and and the message "Automatic boot in xx seconds..." appears. * When i do not hit any key, the seconds are counted to zero an then it starts again at 10 seconds - again and again. *

Good afternoon everyone, I''m trying to compile the xen 2.6.32.x pv_ops kernel on centos 5.5 with i386 quad core xeon system (HP DL380 G3). Having some issues during the kernel compile one of which related to intel agp so I just removed it from .config and didn''t come across it again. This error here has got me stumped though: drivers/built-in.o: In function

Was there any resolution on this I also have a TE410P in an box with an Intel E7501 chipset? -Vickers -------- Original Message -------- Subject: RE: [Asterisk-Users] Re: TE410P card in an HP-Compaq DL380 G4 server Date: Tue, 8 Feb 2005 11:13:24 +1030 From: Peter Childs <peter.childs@nec.com.au> Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion

Hi All I will need to install CentOS 5.3 on HP DL380 R05 server with RAID-1 required. I am a newbie to CentOS / HP servers, need your help: - Does CentOS 5.3 work smoothly with HP DL380 server especially recognizing SAS disks and hardware RAID-1 features? From you experience, do you have to use HP Storage Drivers provided for RedHat Enterprise Linux 5? - How is HP

greetings i have a few dual P3 Compaq 1850R units and use compaq smartstart 5.5 on them before a CentOS 4 load i have acquired some dual P3 Compaq DL380 G1 i.e. Generation 1 units and am wondering which specific smartstart download i should be using for them from this URL below h18004.www1.hp.com/support/files/server/us/subscription/ssdownloads.asp would someone please share their experience

Hi, We are running FC5 test1 on some HP DL380 G4 servers with the stock xen and xen kernels supplied in FC5 release. We have 2 servers, one has 6GB of RAM the other 4GB. Both machines crash (lock up) on boot, I would have hoped to see 4GB of RAM and functional Xen in either case. Last message I see is related to PCI devices, I can try to capture the exact point of crash if it''s

On Fri, 10 Mar 2006, Herta Van den Eynde wrote: > I'm trying to install Red Hat Advanced Server AS 4 on a HP Proliant DL380G4. > Unlike e.g. the DL360, the DL380 does not have the option to set the OS in the > BIOS. > As soon as the installation starts, i.e. even before you get to the point > where you can enter "boot" and whatever boot options you want to use, the

greetings does the list at this url cover *all* options or are there some hidden or newer ones by chance? http://www.centos.org/docs/4/html/rhel-ig-x8664-multi-en-4/ap-bootopts.html i am playing with CentOS 4 on some Compaq dual PIII hardware. The first unit is an 1850R with dual 500Mhz. If you need more info please let me know. it is a basic unit with raid controller and a Gig of DRAM etc.

Hi, Anybody on the list running CentOS 6.3 on the above. If so do you have HP psp 9.10 installed and working without getting the following error? cmahealthd[4406]: segfault at f ip 009ff06d sp bfb6fdc4 error 4 in libc-2.12.so[98e000+18c000] Do you have any version of the psp working without error? Thanks, -- Stephen Clark *NetWolves* Director of Technology Phone: 813-579-3200 Fax:

Peter Bowen wrote: > If I use an initrd, the kernel will hang or panic right before starting > kswapd. The same kernel, if used without initrd will boot fine. On > other non-Compaq Proliant machines it works fine. > I have a guess as what this bug might be. Could you send me the E820 BIOS info for this machine, plus the sizes of the kernel and initrd? I'd like to verify my