similar to: F1000 web configure

I bought a UTStarcom F1000 WiFi IP Phone from http://www.luxoncomm.com and tested it with Asterisk. This is a my first impression of the device. The F1000 supports SIP. It looks and operates like a cell phone, and connects to the Internet through WiFi, so you can use it at any WiFi hotspot. I set up a 802.11b wi-fi network with a Linksys BEFW11S4 Wireless-B broadband router with no security

Does anybody use UTStarcom F1000G Wi-FI VoIP phone? http://www.utstar.com/Solutions/Handsets/WiFi/ I'm planning to buy one and I need to know did you have any problems with phone. What is the sound quality? How close you need to be to the access point? Please, any information's are useful to me. -- Tomislav Parcina tparcina#lama.hr

I wrote a small program to monitor keyboards found on /dev/input/event* It works great but I always get EAGAIN from my read() function. google says this is normal when open() is used and O_NONBLOCK mode. I know this is slightly offtopic but I was wondering if the centos gurus that also program know anything about this. My goal was to not be eating CPU cycles with a small program that just

Has anyone had any luck configuring the UTStarCom F1000 with asterisk? I get the wireless to work but the sip registration is a problem. Below is my SIP Debug. The server is 192.168.0.80 and the phone is 192.168.0.166. Sip.conf: [f1000_1] type=friend host=dynamic defaultip=192.168.0.166 port=5060 secret=mysecret ;auth=md5 username=f1000_1 qualify=yes

Hi all, I' m currently testing a Wifi UT Starcom F1000 and for my taste even with the audio volume level even on max. setting, the speaker is not loud enogh. Is there a way to raise the audio-level specifically for a concrete SIP device via a sip.conf setting or something like that ?? TIA, Bruno

Hi list, I bought two UTStarcom F1000 phones, pre-equipped with the latest firmware, including WPA support. Those are configured to register to an asterisk server on the internet (not LAN), and registration works. Calling and being called also, with transfer and all bells and whistles. After a few minutes up to 5 hours (varies widely), the display tells me that an Accesspoint is not available

I am sending an email from my machine devcentos5x64. the transcript below (hangs for 60 seconds) at the line: MAIL From:<root at devcentos5x64.msgnet.com> SIZE=56 AUTH=root at devcentos5x64.msgnet.com The email succeeds - but I am trying to figure out the 60 second delay. Neither email server is busy. Nothing is waiting. the DNS on both machines point to the same nameserver. The DNS

To continue here with problems on this compaq v2000 laptop, I put kernel source on a USB disk and plugged it into the v2000. NOTHING IS recognized. I tried to manually mount the disk and nothing either... I thought USB was well established.... I thought trying to recompile the kernel for realtek support might get my networking going... I am stuck??? Jerry -------------- next part

I am trying to hwclock to set the time. (hwclock -w) this is what I get on standard 5.2 x86_64. hwclock --debug hwclock from util-linux-2.13-pre7 hwclock: Open of /dev/rtc failed, errno=19: No such device. No usable clock interface found. Cannot access the Hardware Clock via any known method. [root at devcentos5x64 src]# ls -l /dev/rtc crw------- 1 root root 10, 135 Feb 6 13:32 /dev/rtc Any

What is needed to get DAHDI to start up correctly on CentOS 7 and systemd... I am using DAHDI-linux-complete 2.11.1 I saw mention in my search that it has been fixed after 2.11.1 but cannot find what the fix is. Thanks, Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am trying to do an rsync or scp from machine1 to machine2. I am getting arg list to long. I am using centos 5 machine 1 and centos 4.5 on machine2. I am using the default shell which is bash. How can I get past this? THanks, Jerry

I am wanting to use the mkfs.hfsplus as mentioned here http://www.oli.id.au/createosxdmgdiskimagesinlinux but I dont have the command. yum provides "*/mkfs.hfsplus" returns no packages found. Where do I find this command? Thanks. Jerry

I am trying to plug a USB 2 device in a USB 3 slot. Nothing is being detected in "lsusb". Is there something special I need to do? I am running centos 5.5 x86_64. I thought 3.0 was backward compatible. Nothing special about my device its an RS232 to USB device. It works in 2.0 slot. Thanks, Jerry

hi all, running centos 4.7 i686. I seem to have an o pen r elay sendmail server. How do I close it? I have the STRAIGHT centos install sendmail.mc file. Only thing I changed was: dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl so as to allow incoming email and not just localhost. however this seems to relay everyone. I looked at http://www.sendmail.org/tips/relaying but it

Hi all, when I do a "grep JERRY *.h" nothing is returned which is what I expect. This is in my source directory... when I do a "grep JERRY *" every file is returned an a line printed even though there is no JERRY on the line. Then if I do a "grep JERRY *.c" just the 4 lines that have JERRY are returned. This is what is prints for "grep JERRY *" src#

I was just wondering if there are special tricks people do that compile A LOT on centos? Do RAM disks help or something else I dont about that minimizes your compile time? I presently have and AMD x2 4800+ with 2GIG ram. Just curious if I can reduce any more time out of my compiles. Jerry

Hi there, I am trying desperatly to register my WiFi Phone UTStarcomm F1000 with my asterisk server. I already changed the name of the user to "anonymous" since it looks like the phone sends that name. The WiFi Phone's IP is 192.168.1.217, the asterisk server's IP is 192.168.1.200 What is it that I am missing? Any help very much appreciated!!! The error message I get is: Jan

Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ Hi, />/ I have a compaq V2000 laptop. Specs for network say its a />/ realtek 8139/8139C+ NIC. / Is it really a RTL8139? Or it is possible that it's a RTL8100? The reason I ask is because while the RTL8100 is supposed to be MAC compatible with the RTL8139, I'm finding

Apparently Verizon is blocking or changing packets on port 5060 so my softphone from my hotspot will not work. How do I set asterisk (11.23.0) to run default 5060 for all other devices I have - BUT for my software run on a different port like 5070? I'm using linphone and is easy to change the ports from 5060 to 5070 ( I think). Thanks, Jerry -------------- next part -------------- An HTML

Is there a cisco vpn client for linux centso 5 AMD 64 bit? Using google it talks about cisco vpn client but everyplace to download is blocked. I then found a vpnc reference but did not find a 64 bit version. yum install vpnc did nothing.... What is my next step? Jerry