similar to: 7912 phones loosing registration

Like many others on this list, I had been experiencing periodic lockups with my Grandstream products (Handytone 286 ATA & BudgeTone 101). The lockups consisted of seemingly dead devices, no dialtone or response, until I power cycled via software or hardware. The workaround had been to reboot the device every 30 minutes with a cron job. I contacted Grandstream and although they didn't

I had been running an older patched CVS to get VOIP working with NAT and everything had been running fine. I just built * on a new box with CVS-01/18/04-12:19:25. And now I can get remote SIP users to register. Has anything major changed... [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to externip = 69.132.68.17 ; Address

Hello, For the moment I have the following settings in my sip.conf. I want to optimize them to archive the following things: - for the moment all my users will re-register too often. I want that only lagged users to re-register quickly. - check from time to time all users but no too often to see if is logged and can be called. Overall i want only lagged users to reregister and users with good

Hi, Is it possible to use asterisk with Free World Dialup (FWD) ? Did someone manage to make it work? how? Best, -P -- __________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup CareerBuilder.com has over 400,000 jobs. Be smarter about your job search http://corp.mail.com/careers

I have added the three lines to the sip.conf file based on the latest changes from broadvoice. I can receive incoming calls but cannot place any outgoing calls. The error I get is: *CLI> -- Registered to '69.73.19.178', who sees us as IPADDRESS:4569 -- Attempting call on SIP/Broadvoice/5068012 for application Playback(demo-congrats) (Retry 1) Mar 8 08:35:21 NOTICE[29290]:

I'm getting these messages every 7-10 seconds. -- Registered SIP '532' at x.x.x.x port 52956 expires 60 -- Registered SIP '532' at x.x.x.x port 56988 expires 60 -- Registered SIP '529' at x.x.x.x port 51444 expires 60 -- Registered SIP '529' at x.x.x.x port 64044 expires 60 -- Registered SIP '532' at x.x.x.x port 52956 expires 60 -- Registered SIP

Hi, I am new here on this list, and have a problem of which I hope that somebody here can help me with it. I have a Voipbuster account, with which I would like to make phone calls via my Asterisk PBX. If I let X-Lite register directly at voipbuster.com, everything is OK, but if I let Asterisk register there, it says "registration for XXXXXX@sip.voipbuster.com timed out, trying again",

Hi, Red Hat 9.0 Asterisk 1.2.7.1 Whenever I start Asterisk, I am unable to call out on my SIP channel: >-- Executing Dial("Zap/1-1", "SIP/6137451576@6477235412||t|") in new stack >Apr 30 11:02:00 WARNING[12814]: chan_sip.c:1973 create_addr: No such host: 6477235412 >Apr 30 11:02:01 NOTICE[12814]: app_dial.c:1029 dial_exec_full: Unable to create >channel of type

-This is my 'sip.conf' file: ;************************************************************* ; ; SIP Configuration for Asterisk ; [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = default ; Default for incoming calls tos=184 maxexpirey=3600 ; Max length of incoming registration we allow

Hi.. I just wondering why DTMF are not recognized by aterisk on incoming calls from my SIP provider ... ANy suggesteions ?` /Mike

Hello I Installed Asterisk on RedHat 9. I am currently try to configure minimum with two softphone talking to each other over the LAN. I am using X-Lite softphones from xten.com site. I defined 3 phones in sip.conf and also specifies in extensions.conf file. I am able to ring other computer but there is no voice exchange ( i can't hear any think except ring). Here is the portion of sip.conf

Hi there! I installed the BudgetTone (GrandStream) on my LAN without any problems. Then, I moved it to another location using a D-Link NAT. I opened 5060 (SIP) and 5000 to 5008 for RTP. I also fixed the IP address of the BudgetTone. When I receive a call on my Asterisk, it would ring my FXS as before. However, after I pick up, it hangs within a few seconds (Hungup Zap1-1 in the log). The

For some reason I now seem unable to control which codec is chosen. The problem happens with outgoing calls to Stanaphone. Even if I chose disallow=all and allow=ulaw as the only codecs it connects with GSM. Has anyone else got problems with these settings? Any suggestions? As I recalled it, such a setup would not establish a call if the ulaw-codec was not offered by the provider. Stanaphone has

I have some phones (and an ATA) that are shared between two users who each have separate voicemail but they are not behaving as desired nor expected. Incoming calls show up on the correct lines. Calls originating from the device are seen, at the terminating device, as coming from the account listed last in sip.conf, regardless of the line selected. This creates three main issues I would like

Hi people, My asterisk wont register with any sip providers, I have tried three different but they all end up with: Sep 26 17:36:36 NOTICE[114696]: chan_sip.c:4035 sip_reg_timeout: Registration for 'whatever@provider.tld' timed out, trying again There is no firewall and my server has a public IP. Could this be a Asterisk problem? -Fredrik vK

Hello, I am trying to REGISTER asterisk to a SIP server, which is listening on Port 6060 (not 5060). The sip.conf file contains register=18474201111:quintum@192.168.2.94:6060/18474201111 maxexpirey=3600 defaultexpirey=120 But the REGISTER message is sent to Port 6060, but the Request-URI still contains, 5060. This is being rejected by SIP server. REGISTER sip:192.168.2.94

Still getting the same error. Apr 29 11:57:49 WARNING[1125329600]: chan_sip.c:503 retrans_pkt: Maximum retries exceeded on call 6b8b4567327b23c6643c986966334873@211.28.255.135 for seqno 102 (Critical Request) please advise anyone!!!!!someone!!! jai

I just signed up for the BroadVoice service a few hours ago, but for the life of me I can't get any incoming voice. The incoming connection is fine as it rings my extension from outside, but I can't hear anyone talking. Outgoing voice is working fine though. I've been looking through the archives, but I haven't found a solution to the problem yet. I even tried another router

I have two phones (111 and 112) on a LAN, and I have on a users site a phone 333. phone 111 uses sip.conf, while 112 uses real-time set-up. 111 can call 333 AND the audio is working 112 can call 333 but audio is just white noise. 333 can call 111 or 112 and audio is working. The phones are identically set-up (just user name = phone number and password are different) sip.conf (for 111 - all

Dear List members, After succesfully installing the * on a couple of systems, and putting them on test, I observed that there is an intermittent call drop on PSTN line. The systems are - Dell Optiplex P3/500MHz/128MB - Built-in ethernet - 1 X100P (Motorolla chip) card on PCI - 10G HDD etc. - Asterisk April 17 CVS. - 2 Mediatrix FXS ATA (4 phones) - 2 Grandstream phones. - sip.conf, zaptel.comnf