similar to: No Ringback, only on 1 SIP provider

Hi, I recently configured Linux HA for Asterisk service (using Asterisk resource agent downloaded from link: https://github.com/ClusterLabs/resource-agents/blob/master/heartbeat/asterisk ). As per configuration it is working good but when I include "monitor_sipuri=" sip:42 at 10.3.152.103" " parameter in primitive section it is giving me an errors like listed below; root at

I would just like to follow-up on the ringback problem I'm getting from *. As I've said in my previous post, I am not hearing the "real ringback" from the Cisco gateway terminating my call. I don't want to provide false ringback from * (r option of dial), because it'll still give me ringback even if I am suppose to hear announcement or fastbusy. Below is captured ISDN

I am trying to get Asterisk to emulate the sounds of the earlier telephone systems, and the settings in [us-old] are pretty helpful. The only thing lacking is ringback tone, which is not quite as complex as the real phone systems of the day. For example, it is true that a ringback tone commonly used is 420Hz modulated by 40Hz. This is what shows up in [us-old]. But that modulated tone was

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've been struggling with an ongoing problem the last month. Here is the layout of the wiring: T1 from ISP > DiTech Echo Cancel device > Voice Channel-Bank (same) T1 from ISP > (same) DiTech Echo Cancel device > asterisk1 server zap card > fax channel bank (same) T1 from ISP > (same) DiTech Echo Cancel device > asterisk1

Hello, I need help for that error message: ?chan_sip.c:14889 handle_response_invite: Failed to authenticate on INVITE to? My network is: Client1-- -----------asterisk1------asterisk2 Client2-- ? With client1, I do a call ? Asterisk1 forward the call to asterisk2 ? Asterisk2 forward the call to asterisk1 ? Asterisk1 forward the call to

Hi all. Ive recently setup two Asterisk boxes (running Asterisk@Home to be specific), and Im trying to get a trunk going between them. So far I have tried a combination of IAX and SIP configuring them through AMP and writing the config files manually, but I cant seem to get calls going between the two. I have named each box asterisk1 and asterisk2. Does anyone have some working SIP and/or IAX

Hi to all I'm a new user of TDM400P card. The configuration is OK and I have no problem for incoming call. When I try to place a outgoing call towards a PSTN number the call is not always answered. In other words TDM400P seems to not understand that the call has been accepted from the remote party. In other cases (different extension) the call is accepted succesfully. In my opinion TDM400P DSP

Hello, My network is: Client_SS7_1-- -----------asterisk1------asterisk2 Client_SS7_2-- ? I receive a fax from Client_SS7_1 ? Asterisk1 forward the call to asterisk2 ? Asterisk2 forward the call to asterisk1 ? Then, asterisk2 forward the fax to Client_SS7_2 I want that the SIP signaling go to asterisk2, But, I need that the RTP don?t go

Hello, I've got a test setup with 2 asterisk boxes: Asterisk1 with: asterisk 11.5.1 dahdi 2.7.0.1 Digium TDM400 with 2 FXO ports Asterisk2 with: asterisk 11.5.1 dahdi 2.7.0 Digium TDM400 with 2 FXS ports Asterisk1 has the following AEL Dialplan: context remote { s => { Answer(); Dial(DAHDI/g1/7005); }; }; When a call from Asterisk2 comes in, it is correctly

Hi, I have 2 Asterisk systems and a unique scenario where I need to play a particular tone on Asterisk1 and identify the same tone on Asterisk2. Following is my call flow, Asterisk1(Plays audiofile1,Wait for 2 Sec,Plays a tone,Plays audiofile2) -> PSTN -> 3rd Party CONFERENCE SYSTEM <- PSTN <- Asterisk2(Record audiofile1,Wait for a tone,Record audiofile2). A few points to keep in

are you giving answer()? ..o-------------------------------------------------------o.. Brian Fertig Network/Systems Engineer IT Administrator Planet Telecom, Inc. Tampa,FL Office -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Juan Jose Comellas Sent: Friday, September 30, 2005 10:32 AM To: Asterisk Users

For the past week or two, our customers who have Polycom phones have been experiencing a problem... but our customers with Cisco phones do not have this problem. The phones in question are: Polycom SoundPoint IP300 (firmware 1.3.1 or 1.3.4) Polycom SoundPoint IP500 (firmware 1.3.1 or 1.3.4) Cisco 7960 (firmware 7.2 or 7.3) The problem is this: when our Polycom users dial _some_ PSTN numbers,

On 12.12.18 at 19:43 Joshua C. Colp wrote: > On Wed, Dec 12, 2018, at 12:31 PM, Michael Maier wrote: > > <snip> > >> >> The problem: The extension doesn't create a ringback locally, because >> it most probably expects it to >> be sent by the callee - but the callee doesn't send anything (not >> surprising, because there has been >>

Hello! An extension registered at asterisk 13.23 initiates an external call (pjsip). After the Invite, the callee (-> ISP) sends a 100 Trying 183 Session Progress (*without* SDP) Asterisk now sends to the extension: 183 Session Progress (*with* SDP) 183 Session Progress (*with* SDP) (really two times) The callee meanwhile sends 180 Ringing (*without* SDP) which is

Hello, everyone. Could anyone explain me how does ringback detection works in asterisk. Sometimes, when making a call, my asterisk box doesn't detect a ringback and I just hear silence until the other party picks up the phone. I've checked the SIP messages and they are ok (I'm getting 183 "session in progress"), so I guess I should be debugging the RTP packets. From then on

I am using Asterisk (Debian unstable packages) with an OH323 connection to my provider. Everything is working except for the generation of ringback tones when I receive inbound calls from the PSTN. My provider tells me that we're sending call progress indications and that because of this they're expecting us to generate the ringback tone. Does anybody know how to configure this in

I am new to the sip side of things and have a question regarding ringback. I don't hear ringback when using the sjphone softphone when dialing internal extensions. It's fine when dialing outside over the pstn. Is this a issue of the softphone, configuration or sip in general? Thank you, -gcc

I have an application that uses the Asterisk Management Interface to bridge two calls using the Originate command with Dial as the action. Using one SIP server, there is no ringback on the second leg of the call. The first person is called, answers, and hears silence until the second person picks up, even though the second person's phone is ringing. When the call goes to another SIP gateway,

Hello group, I wanted to try out the asterisk iax protocol between two asterisk machines but have several problems with it. My scenario looks like follows. I am using asterisk 0.9.0 on both machines. SER1 <-> asterisk1 <-> IAX <-> asterisk2 <-> SER2 Both SER and asterisk run on a machine with a public IP address. When the telephone on one side makes a call the telephone

Hi!I've a question: I've 2 asterisk, I want pull the ethernet wire and then reconnect it after 5 second, using the VRRP protocol, where must I set the IP for the connection goes on the second asterisk? I want this: I call to asterisk1, then I pull the ethernet wire down, vrrp makes up the other asterisk but not the audio streaming...the callers are always pointed to asterisk1, but for the