Displaying 20 results from an estimated 300 matches similar to: "Requested contexts didn't get merged"
2007 May 17
5
DUNDi configuration problem
Hi peeps,
I've been struggling with DUNDi for a few days now and I can't seem to
make call from Asterisk A to Asterisk B. If I do a "dundi show peers",
it finds the other peer but I can't seem to make any calls. Can
anybody help me out here.
Here's the situation:
Machine 1: Debian with Asterisk 1.4.4 --> 192.168.1.103
Machine 2: AsteriskNOW --> 192.168.1.69
The
2008 Feb 24
2
DUNDi with two servers
Hi,
I'm having difficulties with using DUNDi between two servers. If it were
three I think I could control looping by limiting TTL, but with two I'm not
sure how to prevent a loop causing bad things to happen. I've tried ttl=1
but things still blow up.
The DUNDi configurations are pretty simple and work just fine in both
directions as long as only one of them is using the switch
2010 Mar 09
0
DUNDI Sip authentication failure
Hi all, I'm new in asterisk and I got to set up a dundi config for my work.
I have 2 PBX for the test, the two PBX are in the same local network
PBX A : 192.168.199.23
PBX B : 192.168.199.21
my config files : (on PBX B , the config files on PBX A looks like it)
/etc/asterisk/dundi.conf
[general]
bind=192.168.199.21
port=4520
cachetime=5
ttl=32
autokill=yes
entityid=00:30:18:4C:33:53
2007 Apr 24
1
dundi problem * 1.4.2
Hi All,
I've been banging my head on a small dundi problem...
I have two * servers setup, both have almost identical dundi.conf files:
root@tsjonge:/opt/asterisk/etc# cat dundi.conf
[general]
department=thuis
organization=pipsworld
locality=Amsterdam
stateprov=NH
country=NL
email=remco@pipsworld.nl
phone=+31207508308
;bindaddr=0.0.0.0
;port=4520
entity=00:02:b3:49:69:5e
ttl=16
2007 Mar 06
1
Cancelling a digit in IVR
Hello,
I'm wondering how to make it possible for the user to cancel the last
entered digit, if he made a mistake.
For example, a user calls and starts entering 1...2...4, then he should
be able to press, lets say *, to cancel 4 and enter i.e. 3.
Thanks
Jake
--
------- Domeny w ULTRA NISKICH cenach: -------
.pl - 29 zl, .com.pl - 22,50 zl, reg - 7,50 zl
2007 Feb 27
2
No sound with Playback() or Background()
After switching to Asterisk 1.2.14 from 1.0.x, I encountered a very
strange problem. There is no sound with Playback() or Background()
commands.
Even though, Asterisk console shows the file is being played when I call
the extension (i.e. echo test), I can't hear anything.
My echo test extension looks like this:
exten => 600,1,Answer
exten => 600,2,Playback(demo-echotest)
exten
2006 Jun 14
2
DUNDi Users
I have three Asterisk boxes.
Each has the following in dundi.conf:
180net => dundi_local,0,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial
180q => dundi_q_pbx1,1,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial
180q => dundi_q_pbx2,2,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial
180q => dundi_q_pbx3,3,IAX,dundi:${SECRET}@${IPADDR}/${NUMBER},nopartial
My iax.conf on all three
2010 Mar 22
0
DUNDi Confusion
Dear community,
Please help. I've been looking around the internet (and in this great forum)
for help with DUNDi setup between servers (I'm using Elastix) and while I
can get my servers to lookup extensions on each other very well, I have not
been able to successfully make calls between servers. For my test
environment, I have 3 servers setup for now, and these are the steps I've
2007 Jul 12
0
No subject
[priv]
type=friend
dbsecret=dundi/secret
context=longdistance
Hope this helps, in your case Dundi will save you a world of work on
configuring that many systems, in fact if you structure Dundi like
spokes around a small number of master servers, the config gets real
easy.Let me know how it goes.
On Wed, Apr 16, 2008 at 8:41 AM, Jeremy Mann <jmann at txhmg.com> wrote:
>
>
>
>
2007 Jul 12
0
No subject
[priv]
type=3Dfriend
dbsecret=3Ddundi/secret
context=3Dlongdistance
Hope this helps, in your case Dundi will save you a world of work on
configuring that many systems, in fact if you structure Dundi like
spokes around a small number of master servers, the config gets real
easy.Let me know how it goes.
On Wed, Apr 16, 2008 at 8:41 AM, Jeremy Mann <jmann at txhmg.com> wrote:
>
>
>
2006 May 24
1
DUNDi in 1.2.7.1
Hi
few weeks ago I read about redundancy (HA) of asterisk boxes using
DNS, DUNDi, so I decided to give it a try.
OS FreeBSD 6.1-RELEASE, asterisk 1.2.7.1
on one peer I get:
lk110*CLI> dundi show peers
EID Host Model AvgTime Status
00:11:43:3d:69:e6 195.28.109.37 (S) Symmetric Unavail OK (1 ms)
1 dundi peers [1 online, 0 offline, 0
2006 Jun 15
1
Distributed ACD Queues
It seems that I am having a heck of a time explaining my attempts at distributing ACD Queues to the list. Here's one little problem, that's only a piece of the puzzle.
dundi.conf:
180q => global_dundi_q_pbx1,100,IAX,dundi1:${SECRET}@${IPADDR}/${NUMBER},nopartial
180q => global_dundi_q_pbx2,200,IAX,dundi2:${SECRET}@${IPADDR}/${NUMBER},nopartial
180q =>
2004 Dec 14
2
Asterisk Realtime IAX - Adding fields for database table
Hello,
Right now there is not a table build script at:
http://www.voip-info.org/wiki-Asterisk+RealTime+IAX
Therefore I have taken the SIP build script and added
a few fields that I use from my iax.conf (could be
more out there, please see the complete build script
below):
`dbsecret` varchar(100) default '',
`notransfer` varchar(100) default '',
`inkeys` varchar(100)
2011 Apr 20
1
[IAX] Everyone is busy/congested at this time (1:0/0/1)
Hi,
I have a problem with IAX accounts...
I set up a few months ago an Asterisk server, with mysql support to load iax
accounts.
Settings seems fine because apparently the system works as expected.
Yesterday I tried to add another iax account in the iax.conf directly. And I
have a problem with this new account (named 444).
I can authenticate from 444 to the server, and I can receive calls from
2014 Apr 16
1
DUNDi with SIP Mapping
>From the reading and testing I have done it doesn't look like SIP supports
a username and password in the Dial string. I currently have the following
mapping.
priv => dundi-extens,0,SIP,
dundi:pass at 1.1.1.1/${NUMBER},nounsolicited,nocomunsolicit,nopartial
On the sending side I see
NOTICE[31598] chan_sip.c: Conflicting extension values given. Using 'dundi'
and not
2009 Jan 31
1
iax clients were unregistered after 30sec
Dear,
Our iax clients's ip and port in the database were removed automatically, after 30 secs.
the iax info is saved in odbc and postgresql .
asterisk=# select * from iax_buddies where username='9706015';
name | username | type | secret | md5secret | dbsecret | transfer | inkeys | outkeys | auth | accountcode | amaflags | callerid | context | defaultip | host | language
2007 Mar 16
0
DISA and repeating calls
Hello,
I have a setup like this:
exten => s,1,Ringing
exten => s,n,Wait(3)
exten => s,n,Answer
exten => s,n,Set(TIMEOUT(digit)=6)
exten => s,n,Authenticate(11111)
exten => s,n,DISA(no-password|my-context)
exten => i,1,Playback(invalid)
exten => i,n,Wait(1)
exten => i,n,Goto(s,5)
exten => t,1,Hangup
I need to be able to get back to the
2007 Sep 03
0
Wanted: VoIP Engineer for Warsaw!
Peoplefone AG jest firm? oferuj?c? us?ugi telekomunikacyjne oparte na
technologii Voice over IP (VoIP) w wyj?tkowo niskich stawkach. Peoplefone
jest certyfikowanym partnerem firm
Siemens<http://www.siemens.ch/index.jsp?sdc_p=c175fi1012637lmno1012637psuz1&sdc_sid=1113876080&>i
AVM/FRITZ!Box <http://www.fritz-shop.ch/>. W zwi?zku z naszym dynamicznym
rozwojem, do nowo tworzonej
2006 Jun 15
5
DUNDi Not Able to HandleComplexFailoverSituations
> -----Original Message-----
> From: Watkins, Bradley [mailto:Bradley.Watkins@compuware.com]
> Sent: Thursday, June 15, 2006 10:36 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] DUNDi Not Able to
> HandleComplexFailoverSituations
>
>
> Is it possible for you to explain in more detail the
> situation involved.
2007 Feb 21
0
IAX Realtime - show peers works?
hi all, I'm trying to set up some iax2 trunks in Realtime architecture
with the same backend.
All work better (make call, receive etc etc) but when I do "iax2 show
peers" some asterisk don't show anything and other show the iax2 peers
but with status "unknow".
Name/Username Host Mask Port
Status
ctm1/trixbox 10.0.0.131 (S)