similar to: S101I (IAX) limitation

I'm working on calls coming in to an asterisk box as H.323, and going out as SIP to a remote device (a VoiceMaster). The remote device is refusing the calls with SIP error 406 (Not Acceptable). I have attached the SIP debug output below. It looks like codecs overlaps - can anyone see why the call is being refused? (Note that I'm not registering with the remote SIP device, just

I have a few questions with regards to Digium S101I adapter. I would like to use it as a traveling companion, plugging it into various networks (all behind firewall I assume). I'll be registering it into my asterisk server (behind firewall, port 4569 will be open). 1.) If I plug that small adapter S101I into another network will that network have to have port 4569 open as well? 2.) If

Does anybody know what DTMF coding does S101i adapter using? I've been testing one for over a week and here are my observations: - DTMF signaling is working perfectly with Asterisk, much better than Sipura 3K Though, I think the Asterisk "iaxy" firmware is buggy, the unit is using auto-update feature; so I have Asterisk 1.2.13 and iaxy firmware version is: 23 When enable in

How to configure Digium S101i adapter to work with "pickupexten *8" ? I have few Sipura adapters and "*8" work OK but my new Digium S101i refuses to cooperate. -- #Joseph

Is there anyway to control echo on Digium S101I adapter? -- #Joseph

I have one Digium adapter S101I on a local network and I'm losing the connection periodically. I'm using Asterisk-1.2.21.1 There is no pattern, sometimes it stays connected for a weak sometimes longer. In comparison I have few Sipura adapters and they stay connected for months (never lost single connection). -- #Joseph

http://www.x100p.com/products_2.htm Anyone ever use this box? How's it compare with the Iaxy? I'd like to buy one or the other.. The Iaxy is appealing because to me, it seems less "no name", but this one says that it supports using hostnames, whereas apparently the iaxy only supports IP addresses?? That's appealing to the dynamic DNS guy in me! :-) Any

For those of you who may be interest.... IAX2 loads are now available for the standard builds... http://www.aredfox.com/edownloadsiax2.htm Just a word of caution... Remember to change the ports over to 4569 from whatever. And don't forget to grab the palmtool from http://www.aredfox.com/download/tools/PalmTool.zip My own testing of IAX2 with both a phone and an ATA is that IAX2 is

Has anyone had any experience with the Soyo G688 phone? I'd like to use it as a agent's phone. Is it reliable? How well does it work with *? How's the quality? Features? Thanks, Waldo

Hi all,I hope to find a solution with the help of the list, I'm trying to get the status of my extensions with ejabberd , the idea is to visualize my users ejabberd incoming calls or missed. I'm testing with my operator extension with this code but only get the missed call notification does not show me where the call is coming. my piece of code [operadora] exten =>

Anyone out there using AT-320 phones with IAX? Can you get MWI to work? I can only get it to work with SIP. Also, I note that (on the phone) dtmf has to be set to "sip info" or dtmf doesn't seem to work at all (when the phone's under SIP). Sounds like the IAX firmware isn't all that finished? Eric.

I'm looking for an ATA\Voice Gateway that runs IAX and has several ports (8 would be nice). I am looking to avoid devices that use the same firmware as the ATCOM devices as I found them to be buggy (and a PITA to find the proper update). ---------- Mike Hammett Intelligent Computing Solutions http://www.ics-il.com -------------- next part -------------- An HTML attachment was scrubbed...

I've gotten nothing from http://bbs.atcom.cn on this so far. Perhaps someone on the list has experience with this. Is there a way to get MWI support for PA168V-based ATAs? Apparently some IP phones based on the PA168V chip has this support already (Atcom AT-320 for example) by configuring Asterisk with 'mailboxdetails=yes' in iax.conf. On my ATA, however, it does nothing. Any

I'm having a strange problem with transfers on IAX phones. I have two IAX phones behind my firewall that are extensions from my office phone system. Both phones can receive calls, but only one of the extensions can do blind transfers by pressing the # key. I have a similar problem at the office. Some of the phones can transfer calls, some of them can't. And my Zap lines can always

Hello Has anyone been able to get the Soyo G668 phone to work with Asterisk? I've been playing with it for two days and I haven't had any luck. I've got a soft IP phone(xten) to work fine. If anyone has a sample config page that would be great. Thanks Aaron -------------- next part -------------- An HTML attachment was scrubbed... URL:

On Tue, Dec 23, 2014 at 6:34 PM, Rusty Newton <rnewton at digium.com> wrote: > On Tue, Dec 23, 2014 at 4:17 PM, Joseph <syscon780 at gmail.com> wrote: >> Are there any adapters that would allow me to connect asterisk to wifi or we >> are not there yet? >> I have Digium adapter S101i that was discontinued but similar device that >> would connect to wifi

I have a asterisk server. Two SIP Soft XLites are connected to the server. I am able to make calls from one SIP Phones to the other SIP Phones and landlines successfully. The SIP Soft Phone on th eother side can hear my voice but I cannot hear their voice. They can call my local cell phone as well. Samething, they can hears my voice, I cannot hear their voice. The microphone and speakers are

Hi All, I have installed chan_unicall and MFC/R2 successfully, and is runnign fine. But I noticed that once unicall is installed, asterisk CPU usage as reported by 'top', jumps to 99% every few seconds. I have no incoming calls, and I have even removed the E1 lines from card and I tried almost everything possible but I was not successful in determining the cause of this high cpu

On Tue, Dec 23, 2014 at 4:17 PM, Joseph <syscon780 at gmail.com> wrote: > Are there any adapters that would allow me to connect asterisk to wifi or we > are not there yet? > I have Digium adapter S101i that was discontinued but similar device that > would connect to wifi network and a cell phone would be handy. All you need is a Wi-Fi interface for your computer, or a wired

On 12/23/14 18:35, Rusty Newton wrote: >On Tue, Dec 23, 2014 at 6:34 PM, Rusty Newton <rnewton at digium.com> wrote: >> On Tue, Dec 23, 2014 at 4:17 PM, Joseph <syscon780 at gmail.com> wrote: >>> Are there any adapters that would allow me to connect asterisk to wifi or we >>> are not there yet? >>> I have Digium adapter S101i that was discontinued