similar to: Can't Print from Wine

Hi! I would like to hear what printers go good w/our operating system. While back, I should have checked w/y'all like I'm doing now but I just went ahead and bought a Konica-Minolta PagePro 1350W. Now that W at the end of 1350 is a huge word that means WINDOWS! grrrr! It's a great printer 21pgs/min etc but it doesn't like linux at all and their tech spt will tell you as much. I

Hi, I have some trouble getting files printed on my Solaris 8 machine running Samba 2.0.5. The client is a winxp installed laptop, the printer is configured as a postscript printer (Minolta PagePro 12 PS), although it is a PCL printer (Minolta PagePro 6).

Hello, after upgrading to samba 3.5.6 of Debian Squeeze some printouts will not printed. The same prinjob will printed after a couple of tries. I increased the loglevel and there are only a few messages which showing whtat could be the problem. The printjobs doesn't arrive at cups. [2011/08/10 11:32:12.700665,? 0] lib/charcnv.c:650(convert_string_talloc)? Conversion error: Illegal multibyte

Hi, although I don't expect any answers (like most of the times) , here is my experience so far: I run a samba printserver for +3.000 hosts and 600 printers with a correct setup successfully. So be sure, everything is plugged in, I tried to turn it off and on again, I RTFM'ed and so on. Here is my most successfull attempt to get the printservice going on 3.5.1 and windows 7 46 bit

Hi. Recently i created a print server with cups 1.2.8 and smbd Version 3.0.24-1.fc5 under a fedora 5 box. I've installed some printer like as HP laserjet 2820, Konica Minolta di2510, konica minolta 2430dl, hp laserjet 2600. Drivers were uploaded with sucess. But i was getting a problem when try to create a device mode for HP laserjet 2600. All others work fine. In clientes with windows 2k,

I am considering purchasing a color laser printer for my network and would appreciate some feedback. I have looked at the following: Konica/Minolta 2430DL HP 2600N Can anyone tell me how well they work and are supported by cups as a network laser printing solution? TIA John -- Registered Linux User 263680, get counted at http://counter.li.org -- Registered Linux User 263680, get counted at

Hi, I have problems setting up the printer drivers using samba. I use a fresh setup of Samba Version 4.11.4-SerNet-Debian-6.buster and followed * https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Domain_Member * https://wiki.samba.org/index.php/Setting_up_Samba_as_a_Print_Server * .../Setting_up_Automatic_Printer_Driver_Downloads_for_Windows_Clients Cups is the default debian setup with

I am absolutely thrilled and delighted to report that the problem I have been having on CentOS since I first started using it, back in 4.4, of having all images (graphics) print out from the image viewer as all-black pages appears to be gone! I just printed 13 graphics from the image viewer directly to my laser printer, and they're all excellent. I suppose it could be that I'm using a

Hi! Not sure that this is the right list, but has anyone had any experience setting up a Konica Minolta Bizhub printer to use ldap authentication through samba? I know that the bizhub 250 that i have has built-in authentication, but it's really ridiculous when using the official linux drivers (they only support a one number username and a one number password e.g. 1:5 or similar). And

I am trying to let a Konica-Minolta Copy-Scanner-Printer store scanned stuff to a file. It works at once, if I let it send the file to a SMB share provided by a W2K workstation that is part of a (Samba) domain. It doesn't work, if I want it to store the messages on a share provided by the Samba server. So far I have verified that the user the scanner runs under is allowed to mount the share

I'm using Wine 1.3.3. with Ubuntu 10.04. In Ubuntu there is a network printer installed with a Linux printer driver for Konica Minolta Bizhub C203. The printer works perfect. If I print from OpenOffice (Linux-Version), I can choose different options, may be which printer-slot (A4, A3) colour or black, the print quality - same options like a printer installed in WINXP - but that's in

For some reason, parts of my system are now slowing down to an agonizing crawl from time to time. At first it was my VMWare Server 1.04, which became such a pain that I rebooted. Then, it looked like it was a network-induced thing because the prime culprit was SeaMonkey, particularly with multiple tabs open. I did an ifdown and ifup on my NIC and that seemed to help for a while. But then it

Hi Rowland, do you maybe have any idea what could potentially cause this bug? smbclient thrwos me back a mount error(5): Input/output error when I try to mount the remote smbFS. It doesn't happen with my MacOSx and Windows 7 as client but it happens with Linux OSs and with a Konica Minolta copy machine with a scanner to samba function. The first try to mount fails with the above error.

[2002/09/19 12:02:27, 1] smbd/service.c:make_connection(521) latitude (172.16.0.6) connect to service pagepro6 as user samba (uid=1006, gid=1) (pid 4857) [2002/09/19 12:02:27, 2] smbd/open.c:open_file(582) samba opened file SAMBA.mZaiFj read=No write=Yes (numopen=1) [2002/09/19 12:02:27, 0] smbd/nttrans.c:call_nt_transact_ioctl(2387) call_nt_transact_ioctl: Currently not implemented.

Hi I'm using Samba version 4.1.7 on the server side. On the Client side is multiple versions - a copy machine Konica Minolta - Windows XP - Windows 7 - Mac OSx (Mavericks) - CentOS (XenServer) all of them get sporadic input output errors. E.g: on a Linux I would get a mount error(5): Input/output error after the first try. And as funny as it sounds, but the second try is a success and

I'm trying to test/move some of my LDAP-enabled devices from my actual OpenLDAP server(s) to my new samba AD domain. For now, i'm poking with printers, and i'm testing a Konica-Minolta BizHub C224e. Defining user autentication to external source, i can set (between LDAP, NTLM, NDS, ...) 'Active Directory', and i can/must provide the domain naime. After that, DNS and kerberos

queue with the new driver, on teh samba server I see: rpcclient -U <uid> <printserver> -c 'enumdrivers' [ snip ] [Windows x64] Printer Driver Info 1: Driver Name: [KONICA MINOLTA 350/250/200 VPS] [printserver] # rpcclient -U<uid> -c 'setdriver itmfp1_x64 "KONICA MINOLTA 350/250/200 VPS"' <printserver> Enter chbeyer's password:

Mandi! Andrew Bartlett via samba In chel di` si favelave... Ok, i coma back to an old thread, because vendor finally reply. Little fast-rewind: i own some Konica-Minolta BizHub multifunction printers/copiers, and i need to ''bind'' it to my new AD domain. But authentication does not work, seems bacause that printer try to use SASL over plain LDAP (no SSL nor TLS). After

I am trying to get some printer shares to be anonymous access. I have set guest ok = yes but from the log file, it looks like if a username is passed, and a failed lookup, it wont just default to annonymous. Is there another setting or configuration that I need to add to get it to work? LOG FILE: [2003/05/12 16:13:52, 0] passdb/pdb_ldap.c:pdb_getsampwnam(939) LDAP search

I set it up as a raw printer using printconf. I added it to samba with swat and I get te\he following errors in my log. [2002/07/08 17:35:11, 0] rpc_server/srv_spoolss_nt.c:close_printer_handle(257) close_printer_handle: Invalid handle (OTHER) [2002/07/08 17:35:11, 0] rpc_server/srv_spoolss_nt.c:close_printer_handle(257) close_printer_handle: Invalid handle (OTHER) The printer name and the queue