similar to: Zaptel install...

This winbox application is one that I use to manage routers for myself and my customers, so it is unlikely that there are many others trying to use it. I have used this program (through several versions of the program itself) on my Fedora laptop from FC8 all the way to Fedora 14. I don't know what wine versions that spans, but it's over 5 years and it has worked flawlessly. When I first

I have an issue where * tries to route a call over IAX to another server even if the server is down. I have included the relevant entries from my iax.conf, extensions.conf, and some debug output. If someone could tell me what I have configured incorrectly, I would appreciate it. Thanks, Stephen -----------iax.conf on voip2---------- [voip1] type=friend username=voip1 host=x.x.x.x (ip

Hello, I'm french, so excuse my poor English. I'm face to a terrible thing, with has stole a lot of my time. On the .184 machine, I've the following iax.conf : [general] rtcachefriends=yes bandwidth=high tos=reliability jitterbuffer=no autokill=yes #include "iax.voip1.conf" #include "iax.renoir.conf" The iax.voip1.conf file contains : [VOIP1] type=friend

Hi, I just upgraded from 1.2 to 1.4. In 1.2, when I did a "show uptime" I used to see a second line telling me the time since the last reload. Has this been removed in 1.4? The following is the output of my two test boxes: Connected to Asterisk 1.4.18.1 currently running on voip2 (pid = 10605) Verbosity is at least 3 voip2*CLI> show uptime System uptime: 15 hours, 55 seconds

Has anyone seen this before? This channel is consistently present on both of my asterisk servers. Sometimes they disappear for a few seconds and then come back. It always has the same Call ID. voip1*CLI> sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Lag Jitter Format 192.168.0.102 (None) df92fb1b-8a 00101/03059 00000ms 0000ms UNKN

O, try the following.   Test this first. ldd /usr/sbin/hfaxd  if you getting libpam.so..  something, then hylafax is compiled with pam support.   Next,   apt-get install libpam-ldap   ( just to be sure, i do believe you have installed it already )   create the file :  /etc/pam.d/hylafax Add :   auth         required       pam_ldap.so account   required       pam_ldap.so

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, I posted this also on hylafax list - maybe here is someone with a hint. System: Debian Jessie, Hylafax-Server 6.0.6, pam 1.1.8, libpam-ldapd 0.9.4, nslcd 0.9.4 (all actual debian packets from stable), sernet-samba-*-4.2.7-8 After a switch from OpenLDAP to a Samba 4.2 based LDAP Server, I cannot auth users anymore in Hylafax, everything else

Hi all, Today I got problem below and my domU become unresponsive and I should restart the pc to make it running properly again. [ 240.172092] INFO: task kworker/u:0:5 blocked for more than 120 seconds. [ 240.172110] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.172376] INFO: task jbd2/xvda1-8:153 blocked for more than 120 seconds. [ 240.172388]

Hi, I'm trying to get zapras do work, I had downloaded the pppd-source and the 2 patches. I succefull compiled and install the patched version of pppd, but got this error in message-log Jul 15 11:43:32 voip1 pppd[9296]: In file /etc/ppp/filters: unrecognized option 'active-filter' Jul 15 11:43:57 voip1 pppd[9299]: Plugin zaptel.so loaded. Jul 15 11:43:57 voip1 pppd[9299]: Zaptel

Hi, Sometimes my asterisk server stops. (after a day or two) Last output from CLI is: -------------------------------- -- Registered SIP '000b82017eb7' at 213.237.12.125 port 11620 expires 120 -- Channel 0/26, span 1 got hangup -- Hungup 'Zap/26-1' voip1*CLI> Disconnected from Asterisk server Executing last minute cleanups Asterisk cleanly ending (0).

I upgraded my server from Fedora Core 4 to Fedora Core 5. I was wondering if anybody else has run into the problem and know's the fix? I recompiled asterisk and if I don't have the /usr/lib/asterisk/modules/codec_g729a.so file in place it works. I use or used to use the licensed G729 Codec from Digium. This is the error message from asterisk -vvg: [app_playback.so] => (Sound File

My VoIP provider allows me to have more than one call outbound on the same line simultaneously, for some reason. I am pretty sure that they do not want this to happen, so I'd like instead to limit each line to one call. I do not want the users to have to dial another prefix to go out on another line. Is there any way to add multiple accounts for my _9. extension and have Asterisk

I constantly get the following error messages in /var/log/asterisk/messages: Dec 8 10:52:57 WARNING[1009521664]: File chan_iax.c, Line 3324 (iax_ack_registry): Received unsolicited registry ack from '192.168.0.1' Dec 8 10:52:57 WARNING[1009521664]: File chan_iax.c, Line 4181 (socket_read): Registration failure Where 192.168.0.1 is another asterisk server. Below are the local and

I did an update to ruby 1.8.6 and since then I can''t run anything in Rails. Ex: j@necropolis:~/sandbox/rhp/0708/trunk$ rake -T /usr/lib/ruby/1.8/thread.rb:5:in `require'': no such file to load -- thread.so (LoadError) from /usr/lib/ruby/1.8/thread.rb:5 from /usr/local/lib/site_ruby/1.8/rubygems.rb:85:in `require'' from

Hi all, I'm currently working on getting the whole samba with ldap working. I'm having an error trying to join a computer to the domain, when windows goes to change to the new domain I get the dialogue box to enter the user/pass to join I do that and it returns: the following error occurred.... the username could not be found. taking a look at the smbd.log file it shows: [2005/06/16

Hi I have an account with mynetphone (australia), which gives me two voip (sip) accounts, which i used to have connected to a spa9000. this is behind a firewall, so on the spa9000 I would listen on another port apart from 5060. so on the firewall 5060 would go to voip1 and 5061 to voip2. I moved to asterisk (+tdm410) and the machine was also the firewall and I had no problem - well atleast it

channels.h from today's CVS has MS-DOS ^M end-of-line chars. -- Carson Gaspar - carson at taltos.org Queen trapped in a butch body

Bug: all .out files get rebuilt every make. This is silly, and breaks make install if root cannot write to your build dir. Fix: add dependancy check sop .out files only get rebuilt if the source file changes FixBug: if any source file gets changed, all .out files get rebuilt. This is because man pages and config files both get .out extensions but get created differently. It's

doesnt work for me Dne 29.5.2016 v 17:48 Niklas Larsson napsal(a): > Hi, > > > On 2016-05-27 18:28, Marek ?ervenka wrote: >> after downgrade to 13.8.2 >> May 27 18:21:06 ast kernel: asterisk[16286]: segfault at 1010024 ip >> b49162cd sp bfac0940 error 4 in >> libmysqlclient.so.16.0.0[b48f1000+12e000] >> >> after downgrade to 13.7.2 >>

I've been working on this the past few days and thought I would put it out there to see if anyone else has interest in it. It really has nothing to do with the Digium appliance, I've just been looking for some mass produced solid state hardware to run small branch offices off of for awhile now and I think I've finally landed on something I like. Basically I've taken an HP thin