similar to: Callfiles to Meetme Fails (was: RE: Using Local Channels with Originate)

I'm trying to use Asterisk (v1.2.11) make a callback that dials both legs of the call into a Meetme() room together, but I keep getting "conf-invalid" messages. I created a callfile (/var/spool/asterisk/outgoing/out.call) that specifies a Local channel (extension) which contains a Dial() command to the "dialer", and an extension which contains a Dial() command to the

I have been trying to get a DIALSTATUS output from a call started with originate. I searched a fair bit and have found several references to using local channels to do this. However, I could not find enough of the specifics to get it working myself. What I need to do is dial a zap channel and run various scripts if the channel is answered, busy, no-answer,etc. Here is the dial plan I am

I used the "FreePBX on Debian" HowTo at http://powerontech.com/freepbx-on-debian.htm to install. I use callfiles to initiate calls to my SIP carrier. They get my registration, but they see that my call is interrupted before they can complete the connection. My Asterisk log shows that the call times out after the time (45s) specified in my dialplan Dial() command. What is wrong? [from

hello list, i have created a callfiles with my asterisk 1.4.43 like: Channel: SIP/watara/06xxxxxxxx MaxRetries: 10 RetryTime: 5 WaitTime: 20 Context: mycontext Extension: s Priority: 1 extensions.conf mycontext exten => s,1,Ringing() exten => s,n,Playback(hello-world) exten => s,n,Dial(SIP/105) exten => s,n,Hangup() it works with one number how can i do in order to create a

(Sorry if this has hit the list before. I sent it yesterday, but never saw it come through) I actually got rid of my phone service.. no more pots line in my house. But, I miss my call screen macro. Any way to do this with a SIP channel? (Obviously the parking isn't the problem, but rather recording their name). I set it up so they should only have to record their name once provided they

Hi! I am trying to do a callfiel for autodialing but when I move the callfile to outdialing folder asterisk seems like if did the call but it doesnt. I put here my callfile and that I get when asterisk begins to do the call If anybody has idea, pls. Tell me TIA ;;----CallFile----- Channel: Zap/g1/8093908270 Callerid: 8093908270 MaxRetries: 2 RetryTime: 300 WaitTime: 45

Hello, I'm using Asterisk 1.6.2.0 and I like to call extension #8 from callfile. Unfortunately the #-char ist interpreted just as comment. I got a "Invalid file contents in /var/spool/asterisk/outgoing/callfile, deleting" from asterisk. When I try to escape with \ oder use quotes, I got: \#8,1 failed so falling back to exten 's' or "#8",1 failed so falling back

I actually got rid of my phone service.. no more pots line in my house. But, I miss my call screen macro. Any way to do this with a SIP channel? (Obviously the parking isn't the problem, but rather recording their name). I set it up so they should only have to record their name once provided they call from the same number. Anyway, I think I'm gonna get a big "NO" on

I am sending this again since I haven't get it back for twelve hours: When I originate call to IAXComm, more or less one of tree calls fails for no aparent reason. Originating calls to SIP clients works as expected. Anybody has similar problems? Is it asterisk or client problem? Asterisk log: Jul 15 00:00:04 DEBUG[1179663]: manager.c:1018 process_message: Manager received command

Olivier, I think you are getting confused. Call me on 212-203-4357 and I'll answer your questions but basically I think you are doing this the wrong way. Regards, Dean Collins Cognation Pty Ltd dean at cognation.net <mailto:dean at cognation.net> +1-212-203-4357 Ph +61-2-9016-5642 (Sydney in-dial). ________________________________ From: asterisk-users-bounces at

Hi, I'm trying to get my dialplan to continue executing in the current context after a third-party is called and hangs up. It seems like it should be straightforward but it's not working. Here's what I have in extensions.conf: exten => 333,1,Answer() exten => 333,n,Playback(hello) exten => 333,n,Dial(SIP/19992223333 at sipcarrier,,g) exten => 333,n,Playback(hello) exten

Hi, Where can I find relevant information concerning callto:// tags ? Is it standardized or browser specific ? How within your browser, can you specify the software and parameters to used when clicking on such callto:// tags ? I couldn't find much googling or reading Preferences tab in Firefox. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, Has someone successfully configured support of either callto or tel protocol in MS Office in general or MS Office Online's Outlook specifically ? (I'm referring here in Outlook client embedded in MS Office cloud service). If positive, what are the basic steps to enable such feature (clicking on a contact phone number triggers whatever program is attached to tel/callto protocol in

Is it well known that setting the ActionID when connecting to AMI has absolutely no effect? Is this fixed in Asterisk 1.4? If you add an ActionID to your Originate command for example, it looks like the only events that come back with an ActionID associated are the initial response, OriginateSuccess and OriginateFailure. That's it. No other events have an ActionID associated. This pretty much

merge sirve pero no para cumplir la condición de si un dato es "x", buscarlo en el otro data.frame y asignarlo El mié., 20 mar. 2019 a las 10:23, Carlos J. Gil Bellosta (< cgb en datanalytics.com>) escribió: > ?merge > > El mié., 20 mar. 2019 a las 14:22, MAURICIO MARDONES (< > mauricio.mardones en ifop.cl>) escribió: > >> Amigos erreros >>

I've discovered that when dialing out using API's Originate action, a no answer is considered a failed attempt, while a busy is considered a successful attempt. The problem I'm having is that when I dial an invalid number, say a disconnected number that gives a fast busy, my CDRs are identical to those generated by a no answer attempt. Is there a way to distinguish between a no

Toda la razon!!! merge era todo! Saludos El mié., 20 mar. 2019 a las 10:57, Carlos Ortega (<cof en qualityexcellence.es>) escribió: > Hola Mauricio, > > No, creo que no es lo que dices.. > > Con merge, indicas por qué columna (pueden ser varias) quieres juntar los > dos dataframes y con los parámetros "all.x", "all.y" y "all" indicas si

hi, afaik, the action-id provided with the OriginateAction should only show up in the OriginateSuccess or OriginateFailure event. Intermediate events that are generated when the channels are create will NOT carry the action-id of the originate. The async flag tells asterisk to process originates in parallel, i.e. if you have two users originating calls and NO async flag set, the second originate

Hello all, Encouraged by the successful "demo", I'am getting on with Asterisk CVS. I added 2 H.323 extensions in extensions.conf [default] include => demo exten => 701,1,Dial(H323/gm2@192.168.1.20/s) exten => 702,1,Dial(H323/gm2@192.168.1.25/s) With: - [demo] is defined by default in sample.extensions.conf - Asterisk server is running on host 192.168.1.20, on the

Hi all, I try to ask helps again about chan_h323 extensions. I define this in h323.conf: [general] port = 1720 bindaddr = 0.0.0.0 allow=gsm allow=ulaw gatekeeper = DISABLE context=default [gm1] type=friend host=192.168.1.20 context=default [gm2] type=friend host=192.168.1.25 context=default and I have in extensions.conf : [demo]