similar to: Help - Received response: "Forbidden" from '"Unknown"

I have a weird problem.... Asterisk 1.4 E100P connected to a Panasonic TDA phone system Here is what I get SIP Ext -> Panasonic Extensions No Problems Panasonic Ext -> SIP Extensions No Problems SIP Ext -> VOIP Provider No Problems Panasonic Ext -> VOIP Provider Errors ---------- Working SIP -> VOIP -- Executing [903........@from-sip:1]

I did a NoOp and see what the callerid was and when coming from the SIP Ext->Voip it is set to the Extension Number of the SIP Extension (as you would expect). When coming from the Panasonic the CallerID is blank, I tried setting it to nothing again, and I tried setting it to the callerid of the voip provider, a sip extension id, the extension number on the Panasonic side, the zap channel

On this macro I keep getting exited non-zero on s,3, but s,3 is doing what it is suppose to do but the macro stops. Is there a way to make a macro ignore errors and continue to s,4? I have the lattes ver of sox 12.17.4. Also if I just run this line from the command line I don't get an error. [root@redhat monitor]# sox in.wav in-rev.wav reverse [root@redhat monitor]# [macro-record-cleanup]

This is what I'm doing it gets you both sides of the phone call...small size...and playable on windows through a share. My notes: On redhat 9 I have to run the following command for asterisk to start LD_ASSUME_KERNEL=2.4.1 asterisk -vvvvgc [macro-record-on] exten => s,1,SetVar(CALLFILENAME=${TIMESTAMP}-${ARG2}-${ARG1}) exten => s,2,Monitor(wav,${CALLFILENAME}) ;exten =>

Hi, I am having difficulty getting my record phone call dial-plan script working. I have tried the example record call scripts but they start recording before they are actually connected to an end point, e.g. you get ringing or announcements being recorded. It seems to me that these are bugs with the Dial() command: 1) Using M(x) in a dial command does not allow argument to be passed. Using

[apologies for no line wrap; config lines at bottom] I have mentioned on several threads here that the Monitor application doesn't do exactly what one would expect: the originating and answering legs of a call are unsynchronized by the duration of the interval that it takes for the answering leg to pick up the phone. This can be very distracting in a final mixed version of the file. Brian

I thought I would post this in case it might be of any use to anyone. Not anything special but it does work. Keep in mind you need sox and wmix. Here is some relevant exerpts of my extensions.conf using John Todds macro. [globals] CALLFILENAME=foo FOO=foo CALLERIDNUM=foo [default] exten => 287,1,Macro(dial,SIP/agent20002|20) exten => 287,2,Voicemail(u287) exten =>

I'm trying to set on-demand call recording. Here's a snippet of the pertinent dialplan. The purpose of this is to allow one user in particular to be able to receive an email recording of the call everytime he dials *91 + number. The problem is that the email is not going out or being generated when I use the ${CALLFILENAME} variable. When I use the actual file name of the gsm recording,

I have a question on how to handle the "h" routines. I have noticed that if the call is hung up by the side that originated the call, the "h" routine is not extendable via a macro, or at least I have been unable to do it. My tests have included only SIP->SIP calls. If the originating side hangs up first: The macro is called from "exten =>

Hi all, I'm trying to make a context that will monitor a call and when it's completed it would e-mail the wav to a specified mail adres. So I made a standard context that records a call, like this: exten => _*31*00[1-9].,1,Setvar(CALLFILENAME=CALL-${EXTEN:4}-$ {TIMESTAMP}) exten => _*31*00[1-9].,2,Monitor(wav,${CALLFILENAME},m}) exten =>

OK. I now have call recording working for both incoming and outgoing calls. Now I want to make those wavs into mp3. I could launch a script from cron that checks for new wavs and converts them. But that wouldn't be so elegant. Launching it from * on hangup would be nicer. How is it done? [outgoing] exten => _0.,1,SetVar(CALLFILENAME=${EXTEN:1}-${TIMESTAMP}) exten =>

I'm trying to set up basic monitoring for a specific extension (5004) to record all outgoing and incoming calls and save them as WAV files. I've set this in the extensions.conf file: exten => 5004,1,Answer exten => 5004,2,Wait,1 exten => 5004,3,SetVar(CALLFILENAME=/var/spool/asterisk/MONITOR-${TIMESTAMP}-${CA LLERIDNUM}) exten => 5004,4,Monitor,wav|${CALLFILENAME} But it

I currently have in extensions.conf: exten => 106,1,Set(CALLFILENAME=${TIMESTAMP}_${CALLERID(num)}) exten => 106,n,Monitor(wav,${CALLFILENAME},m) exten => 106,hint,SIP/106 exten => 106,Macro(stdexten,106,${HINT}) When I called x106 this was logged: -- Executing [106 at voicemenu-custom-4:1] Set("DAHDI/7-1", "CALLFILENAME=_xxxxxxx") in new stack --

We are using the following to record conversations. exten => _1XXX.,1,SetVar(CALLFILENAME=call_to_${EXTEN:1}_dated_${TIMESTAMP}) exten => _1XXX.,2,Monitor(wav,${CALLFILENAME},m) exten => _1XXX.,3,Dial(IAX2/4506:zj5S3A5a@nl.voipgate.nl/${EXTEN:1}) exten => _1XXX.,4,Congestion exten => _1XXX.,104,Congestion This was working previously to record both sides of the conversation but now

Does soxmix works with asterisk ver. 0.9? I have ver. sox-12.17.5 on Gentoo but the option "m" does not combine two WAV files (In and Out) into one file. I have two separate files in /monitor folder. exten => 711,1,SetVar(CALLFILENAME=${EXTEN:1}-${TIMESTAMP}) exten => 711,2,Monitor(wav,${CALLFILENAME},m) exten => 711,3,Dial(${sales_support},20,r) exten =>

Hello! I'm using Asterisk for our office telephony, but we have some problems that still we can't resolve about it. Here they are: 1) merge in/out call recording files I also tried to use a script I found on the internet, called 2wav2mp3 In extensions.conf I added the following lines ; script to be executed when monitoring has been finished MONITOR_EXEC=/usr/local/bin/2wav2mp3 exten

I have a little call recording script that I am running and it works fine, but I have one problem. I get CDR when a user calls into the extension, but I do not get CDR for the call that it makes outbound on # 17. Any idea why? Here is the extensions info: [default] exten => 2211,1,Answer exten => 2211,2,Wait(1) exten => 2211,3,Playback(/etc/asterisk/recording/getshop) exten =>

I have setup as per the monitor example configuration on the wiki site and all works well for an extension dialing 8 then the number. However, if I dial from an AGI script the recording stops after a few seconds. I see an extra answer in the console and suspect that is the reason. Could any kind soul help me to get around this? Extensions.conf.. exten =>

I need help need recording all call for my pbx but i am a novato in asterisk my confi for record is: exten=>_NXXXXXXXXX,n,Set(CALLFILENAME=CLIENTE-${CALLERID(num)}-${EXTEN}-${STRFTIME(${EPOCH},,%Y%m%d-%H%M%S)}-${UNIQUEID}) exten => _NXXXXXXXXX,n,MixMonitor(${CALLFILENAME}.gsm,m) exten => _NXXXXXXXXX,n,Dial(${TRUNK_CLIENTE}/${EXTEN}) -- Bayardo S?nchez Garc?a Web Developer - Internet

We i have settup it like this it giveme caller id agent id and date-time on gsm file but i want them to be in folder on every day basis datewise. exten => _1NXXNXXXXXX,2,Set(CALLFILENAME=${ACCOUNTCODE}-${EXTEN}-${TIMESTAMP}) exten => _1NXXNXXXXXX,3,Monitor(gsm,/rec/asterisk/apr07/${CALLFILENAME},mb) Any Idea ? Faisal > ------------------------------ > > Message: 16 >