similar to: Unicall/R2 for Asterisk 1.4 Available for TESTING

I have a customer that is complaining that any call coming in from Nextel gives a fast busy. We are running Asterisk 1.4.7.1 with Zaptel 1.4.3 and all the MFC/R2 patches and libraries. All other calls go out and come in, just Nextel seems to have this problem. The phone company technician connected a PBX emulator on the line and that one could receive the calls from Nextel. The E1 is provided

I have a small call center running with Asterisk 1.4.4 and Unicall. Everything seems to be working but twice now we had to reset the server because all lines stopped working. You can see users dialing in and reaching the queue but the agents never get the call and the lines are not released. I saw that there is a new Zaptel driver which fixes a racing condition with a TE110P card which is

Uys, Steve Underwood I just got a Sangoma A101 card and Im using unicall 0.0.3.pre9 for R2MFC, I get the far and local end unblocked but as soon as I try to make a call I get dialing and then protocol failure.. Do you guys know if there are any issues with sangoma and unicall? Anybody has an a101 card working with unicall and r2mfc? Are you out there Steve? :)

I am having a problem trying to get a Sangoma A101 to work with Unicall. I have installed the sangoma drivers and everything seems to be well but when I try to run ztcfg I get the following error: CAS signalling on span 1 conflicts with HDLC with FCS check on channel 16. Here is my /etc/zaptel.conf # MFC/R2 normalmente no usa CRC4 span=1,0,0,cas,hdb3 cas=1-15:1101 dchan=16 cas=17-31:1101

Hi Guys i've trying to set a mfcr2 systembut i can't find the working combination between -asterisk version -spandsp version -unicall version i can compile but loading the pbx shows [chan_unicall.so]Dec 5 23:04:42 WARNING[27865]: loader.c:325 __load_resource: /usr/lib/asterisk/modules/chan_unicall.so: undefined symbol: dtmf_put Dec 5 23:04:42 WARNING[27865]: loader.c:554 load_modules:

Hello everybody, i'm from Mexico, at the time i?m working on a production server with asterisk 1.2.25 + spandsp-0.0.4 + libmfcr2-0.0.3+libsupertone-0.0.2+libunicall-0.0.3 and zaptel-1.2.22. I installed this version of astunicall that i downloaded from http://www.moythreads.com/astunicall/ Everything works fine, i'm able to make outgoing calls and recive incoming calls with all ANI and

Hello, i'm using asterisk 1.4.9 in fedora 7, i was compiled its with this package: libpri-1.4.2 asterisk-1.4.9 spandsp-0.0.4 unicall-0.0.5pre1 libmfcr2-0.0.3 libsupertone-0.0.2 libunicall-0.0.3 zaptel-1.4.4 i'm using a E1 pci card with R2 but they not work, when I start the asterisk its generate this log: [May 12 08:53:24] WARNING[30814] channel.c: No channel type

Hi everyone! I'm having some issue trying to place calls with asterisk connected to an E1 R2 from Telmex Argentina. The other E1 port is connected to a Meridian which also uses R2 protocol. Calls sometimes fail with different error messages such as: Unicall protocol error 32773, 32772, 32769. Some other calls fail saying: Far end disconnected(cause=Destination out of

Hi, I have installed Elastix 1.5.2 (Barranquilla, Colombia (TELCO: METROTEL)) with a TE220P (2xE1) and TDM2400P (16FXS), openr2 is included in 1.5.2 version. The outcoming calls are ok, but with incoming call i have an error: ERROR*[*14972*]* chan_dahdi.c: Chan 2 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State = Seize ACK Transmitted, MF state = Category Request Transmitted,

Hi, Anyone there could figure me out on how to install my unicall. I followed the instruction below in the stated site at; http://soft-switch.org/unicall/installing-mfcr2.html. Questions: 1. On what directory/folder should I copy the chan_unicall.c, channels_makefile.patch? 2. On what directory/folder should I command patch < channels_makefile.patch? 3. On what directory/folder should I

Does anybody have a working Asterisk server with Unicall using MFCR2 in Brazil? Were having problems. It seems SPANDSP never detect the tones from the telco. Im using brazil protocol variant. Im having lots of problems to find out why spandsp seems to not detect the MF tones. We send the first digit, the telco says they receive it, and respond with the proper signal to ask for the next digit, we

Hi! Im having some troubles trying to configure * as a bridge between a telco and a pbx with R2, the scenario is this: ------------ E1/R2 --------- E1/R2 ------------ | Telco |-------------| * |-------------| PBX | | (Telmex) | --------- | | ------------ ------------ I can receive calls from the telco

Hi, i have one Asterisk with a Digium E1 card, and a Meridian Nortel Release 11. I need to connect both of them. We are using MFC/R2 for this.. The Diagram: [ NORTEL ] ( AMI ) ------------------------------------------------ (DIGIUM) [ ASTERISK] we have green light at the digium card, and at asterisk we see all 31 channels as idle. But when i want to recive a call from the Nortel to the

Hi... I have the next problem.. I have a FXO card with i can make calls but i cant recive calls. At the consol, i get the next error: -- Zap/2-1 is ringing -- Zap/2-1 is ringing -- Zap/2-1 answered Zap/1-1 -- Attempting native bridge of Zap/1-1 and Zap/2-1 WARNING[262160]: File chan_zap.c, Line 2857 (zt_handle_event): Ring/Off-hook in strange state 6 on channel

Hi, I'm running Asterisk 1.4.2 on a Debian GNU/Linux and a Digium TE210P card. I have one E1 with MFCR2 Signaling. I compiled asterisk + libunicall, and I can make calls over E1, but can't receive. Here the CLI when I make a call: -- Executing [006191642208@ps5:1] Dial("SIP/23-081cbc40", "Unicall/g1/91642208|50") in new stack -- Called g1/91642208 [May 14

Hi every one . There are any out there that have a unicall deploy working without problem ? Can give me some tips or referenece about his config ? Regards

Hello All, I'm facing problems with Unicall on this scenario : CentOS 4.3 - Running on x86_64 Asterisk 1.2.7.1 Zaptel 1.2.5 When running zttool , shows all Spans OK. But I can't receive and make calls. I tried to change many parameters and still doesn't work. Any clues ? * unicall.conf [channels] language=br context=incoming-pstn usecallerid=yes hidecallerid=no immediate=no

Hi, i have one Asterisk with a Digium E1 card, and a Meridian Nortel Release 11. I need to connect both of them. We are using MFC/R2 for this.. The Diagram: [ NORTEL ] ( AMI ) ------------------------------------------------ (DIGIUM) [ ASTERISK] we have green light at the digium card, and at asterisk we see all 31 channels as idle. But when i want to recive a call from the Nortel to the

I am having a strange problem with an asterisk servier using R2 Unicall in Mexico. Most calls go through fine but some of them give me an error like this: -- Executing Dial("SIP/86-db41", "Unicall/g2/014448343600") in new stack -- Called g2/014448343600 Feb 9 21:44:39 WARNING[23069]: chan_unicall.c:2644 handle_uc_event: Unicall/2 event Dialing Feb 9 21:44:45

Hi all, Anyone have an idea which version of spandsp, libunicall, libmfcr2, libsupertone, app_rxfax/app_txfax and chan_unicall I should use for the latest asterisk 1.2? Would that be the ones listed below? http://www.soft-switch.org/downloads/spandsp/spandsp-0.0.4pre4.tgz http://www.soft-switch.org/downloads/snapshots/spandsp/test-apps-asterisk-1.2/